Diagnostic tracer layers of Al and/or Mg have been embedded in Dynamic Hohlraum targets which are imploded on Sandia National Laboratories Z generator by surrounding them with nested arrays of tungsten wires. The K-shell lines of these elements are observed, usually in absorption, in both time-resolved and time-integrated spectra. The radiation physics of line formation in this environment is well understood and captured with a detailed model. A {chi}{sup 2} fit to the measured line intensities is used in conjunction with the model to determine the hohlraums intrinsic properties. Among other features, our analyses find no evidence of intrinsic top-bottom asymmetry in the Dynamic Hohlraums.
In recent dynamic hohlraum experiments on the Z facility, Al and MgF{sub 2} tracer layers were embedded in cylindrical CH{sub 2} foam targets to provide K-shell lines in the keV spectral region for diagnosing the conditions of the interior hohlraum plasma. The position of the tracers was varied: sometimes they were placed 2 mm from the ends of the foam cylinder and sometimes at the ends of the cylinder. Also varied was the composition of the tracers in the sense that pure Al layers, pure MgF{sub 2} layers, or mixtures of the elements were employed on various shots. Time-resolved K-shell spectra of both Al and Mg show mostly absorption lines. These data can be analyzed with detailed configuration atomic models of carbon, aluminum, and magnesium in which spectra are calculated by solving the radiation transport equation for as many as 4100 frequencies. We report results from shot Z1022 to illustrate the basic radiation physics and the capabilities as well as limitations of this diagnostic method.
A quasi-spherical z-pinch may directly compress foam or deuterium and tritium in three dimensions as opposed to a cylindrical z-pinch, which compresses an internal load in two dimensions only. Because of compression in three dimensions the quasi-spherical z-pinch is more efficient at doing pdV work on an internal fluid than a cylindrical pinch. Designs of quasi-spherical z-pinch loads for the 28 MA 100 ns driver ZR, results from zero-dimensional (0D) circuit models of quasi-spherical implosions, and results from 1D hydrodynamic simulations of quasi-spherical implosions heating internal fluids will be presented. Applications of the quasi-spherical z-pinch implosions include a high radiation temperature source for radiation driven experiments, a source of neutrons for treating radioactive waste, and a source of fusion energy for a power generator.
We present the first comprehensive study of high wire-number, wire-array Z-pinch dynamics at 14-18 MA using x-ray backlighting and optical shadowgraphy diagnostics. The cylindrical arrays retain slowly expanding, dense wire cores at the initial position up to 60% of the total implosion time. Azimuthally correlated instabilities at the array edge appear during this stage which continue to grow in amplitude and wavelength after the start of bulk motion, resulting in measurable trailing mass that does not arrive on axis before peak x-ray emission.
Z-pinch plasmas are susceptible to the magnetic Rayleigh-Taylor (MRT) instability. The Z-pinch dynamic hohlraum (ZPDH), as implemented on the Z machine at Sandia National Laboratories, is composed of an annular tungsten plasma that implodes onto a coaxial foam convertor. The collision between tungsten Z pinch and convertor launches a strong shock in the foam. Shock heating generates radiation that is trapped by the tungsten Z pinch. The radiation can be used to implode a fuel-filled, inertial confinement fusion capsule. Hence, it is important to understand the influence that the MRT instability has on shock generation. This paper presents results of an investigation to determine the affect that the MRT instability has on characteristics of the radiating shock in a ZPDH. Experiments on Z were conducted in which a 1.5 cm tall, nested array (two arrays with initial diameters of 2.0 and 4.0 cm), tungsten wire plasma implodes onto a 5 mg/cc, CH{sub 2} foam convertor to create a {approx}135 eV dynamic hohlraum. X-ray pinhole cameras viewing along the ZPDH axis recorded time and space resolved images of emission produced by the radiating shock. These measurements showed that the shock remained circular to within +/-30-60 {micro}m as it propagated towards the axis, and that it was highly uniform along its height. The measured emission intensities are compared with synthetic x-ray images obtained by postprocessing two-dimensional, radiation magnetohydrodynamic simulations in which the amplitude of MRT perturbations is varied. These simulations accurately reproduce the measured shock trajectory and spatial profiles of the dynamic hohlraum interior emission as a function of time, even for large MRT amplitudes. Furthermore, the radiating shock remains relatively uniform in the axial direction regardless of the MRT amplitude because nonuniformities are tamped by the interaction of the tungsten Z-pinch plasma with the foam. These results suggest that inertial confinement fusion implosions driven by a ZPDH should be relatively free from random radiation symmetry variations produced by Z-pinch instabilities.
Progress in understanding the physics of dynamic-hohlraums is reviewed for a system capable of generating 13 TW of axial radiation for high temperature (>200 eV) radiation-flow experiments and ICF capsule implosions.
Inertial confinement fusion capsule implosions absorbing up to 35 kJ of x-rays from a {approx}220 eV dynamic hohlraum on the Z accelerator at Sandia National Laboratories have produced thermonuclear D-D neutron yields of (2.6 {+-} 1.3) x 10{sup 10}. Argon spectra confirm a hot fuel with Te {approx} 1 keV and n{sub e} {approx} (1-2) x 10{sup 23} cm{sup -3}. Higher performance implosions will require radiation symmetry control improvements. Capsule implosions in a {approx}70 eV double-Z-pinch-driven secondary hohlraum have been radiographed by 6.7 keV x-rays produced by the Z-beamlet laser (ZBL), demonstrating a drive symmetry of about 3% and control of P{sub 2} radiation asymmetries to {+-}2%. Hemispherical capsule implosions have also been radiographed in Z in preparation for future experiments in fast ignition physics. Z-pinch-driven inertial fusion energy concepts are being developed. The refurbished Z machine (ZR) will begin providing scaling information on capsule and Z-pinch in 2006. The addition of a short pulse capability to ZBL will enable research into fast ignition physics in the combination of ZR and ZBL-petawatt. ZR could provide a test bed to study NIF-relevant double-shell ignition concepts using dynamic hohlraums and advanced symmetry control techniques in the double-pinch hohlraum backlit by ZBL.
The magnetic implosion of a high-Z quasi-spherical shell filled with DT fuel by the 20-MA Z accelerator can heat the fuel to near-ignition temperature. The attainable implosion velocity on Z, 13-cm/{micro}s, is fast enough that thermal losses from the fuel to the shell are small. The high-Z shell traps radiation losses from the fuel, and the fuel reaches a high enough density to reabsorb the trapped radiation. The implosion is then nearly adiabatic. In this case the temperature of the fuel increases as the square of the convergence. The initial temperature of the fuel is set by the heating of an ion acoustic wave to be about 200-eV after a convergence of 4. To reach the ignition temperature of 5-keV an additional convergence of 5 is required. The implosion dynamics of the quasi-spherical implosion is modeled with the 2-D radiation hydrodynamic code LASNEX. LASNEX shows an 8-mm diameter quasi-spherical tungsten shell on Z driving 6-atmospheres of DT fuel nearly to ignition at 3.5-keV with a convergence of 20. The convergence is limited by mass flow along the surface of the quasi-spherical shell. With a convergence of 20 the final spot size is 400-{micro}m in diameter.
A z-pinch radiation source has been developed that generates 60 {+-} 20 KJ of x-rays with a peak power of 13 {+-} 4 TW through a 4-mm diameter axial aperture on the Z facility. The source has heated NIF (National Ignition Facility)-scale (6-mm diameter by 7-mm high) hohlraums to 122 {+-} 6 eV and reduced-scale (4-mm diameter by 4-mm high) hohlraums to 155 {+-} 8 eV -- providing environments suitable for indirect-drive ICF (Inertial Confinement Fusion) studies. Eulerian-RMHC (radiation-hydrodynamics code) simulations that take into account the development of the Rayleigh-Taylor instability in the r-z plane provide integrated calculations of the implosion, x-ray generation, and hohlraum heating, as well as estimates of wall motion and plasma fill within the hohlraums. Lagrangian-RMHC simulations suggest that the addition of a 6 mg/cm{sup 3} CH{sub 2} fill in the reduced-scale hohlraum decreases hohlraum inner-wall velocity by {approximately}40% with only a 3--5% decrease in peak temperature, in agreement with measurements.
The authors have constructed a quasi-analytic model of the dynamic hohlraum. Solutions only require a numerical root solve, which can be done very quickly. Results of the model are compared to both experiments and full numerical simulations with good agreement. The computational simplicity of the model allows one to find the behavior of the hohlraum temperature as a function the various parameters of the system and thus find optimum parameters as a function of the driving current. The model is used to investigate the benefits of ablative standoff and axial convergence.
The maximum power achieved in a wide variety of high-power devices, including electron and ion diodes, z pinches, and microwave generators, is presently limited by anode-cathode gap breakdown. A frequently-discussed hypothesis for this effect is ionization of fast neutral atoms injected throughout the anode-cathode gap during the power pulse. The authors describe a newly-developed diagnostic tool that provides the first direct test of this hypothesis. Time-resolved vacuum-ultraviolet absorption spectroscopy is used to directly probe fast neutral atoms with 1 mm spatial resolution in the 10 mm anode-cathode gap of the SABRE 5 MV, 1 TW applied-B ion diode. Absorption spectra collected during Ar RF glow discharges and with CO{sub 2} gas fills confirm the reliability of the diagnostic technique. Throughout the 50--100 ns ion diode pulses no measurable neutral absorption is seen, setting upper limits of 0.12--1.5 x 10{sup 14} cm{sup {minus}3} for ground state fast neutral atom densities of H, C, N, O, F. The absence of molecular absorption bands also sets upper limits of 0.16--1.2 x 10{sup 15} cm{sup {minus}3} for common simple molecules. These limits are low enough to rule out ionization throughout the gap as a breakdown mechanism. This technique can now be applied to quantify the role of neutral atoms in other high-power devices.