Publications

Cruz-Campa, Jose L.; Gupta, Vipin P.; Nielson, Gregory N.; Okandan, Murat O.; Resnick, Paul J.; Sanchez, Carlos A.; Clews, Peggy J.; Pluym, Tammy P.; Sweatt, W.C.; Lentine, Anthony L.

Abstract not provided.

Applied Physics Letters

Lu, Tzu-Ming L.; Bishop, Nathaniel B.; Pluym, Tammy P.; Means, Joel L.; Kotula, Paul G.; Cederberg, Jeffrey G.; Tracy, Lisa A.; Lilly, Michael L.; Carroll, Malcolm

Abstract not provided.

Proceedings of SPIE - The International Society for Optical Engineering

Nielson, Gregory N.; Okandan, Murat O.; Cruz-Campa, Jose L.; Resnick, Paul J.; Wanlass, Mark W.; Clews, Peggy J.; Pluym, Tammy P.; Sanchez, Carlos A.; Gupta, Vipin P.

Microsystem-Enabled Photovoltaic (MEPV) cells allow solar PV systems to take advantage of scaling benefits that occur as solar cells are reduced in size. We have developed MEPV cells that are 5 to 20 microns thick and down to 250 microns across. We have developed and demonstrated crystalline silicon (c-Si) cells with solar conversion efficiencies of 14.9%, and gallium arsenide (GaAs) cells with a conversion efficiency of 11.36%. In pursuing this work, we have identified over twenty scaling benefits that reduce PV system cost, improve performance, or allow new functionality. To create these cells, we have combined microfabrication techniques from various microsystem technologies. We have focused our development efforts on creating a process flow that uses standard equipment and standard wafer thicknesses, allows all high-temperature processing to be performed prior to release, and allows the remaining post-release wafer to be reprocessed and reused. The c-Si cell junctions are created using a backside point-contact PV cell process. The GaAs cells have an epitaxially grown junction. Despite the horizontal junction, these cells also are backside contacted. We provide recent developments and details for all steps of the process including junction creation, surface passivation, metallization, and release.

Biefeld, Robert M.; Okandan, Murat O.; Cruz-Campa, Jose L.; Resnick, Paul J.; Pluym, Tammy P.; Clews, Peggy J.; Sweatt, W.C.; Gupta, Vipin P.; Cederberg, Jeffrey G.; Wierer, Jonathan W.; Wang, George T.; Li, Qiming L.; Koleske, Daniel K.; Fischer, Arthur J.; Nielson, Gregory N.

Abstract not provided.

Cruz-Campa, Jose L.; Okandan, Murat O.; Resnick, Paul J.; Grubbs, Robert K.; Clews, Peggy J.; Pluym, Tammy P.; Young, Ralph W.; Gupta, Vipin P.; Nielson, Gregory N.

Abstract not provided.

Cruz-Campa, Jose L.; Okandan, Murat O.; Resnick, Paul J.; Grubbs, Robert K.; Clews, Peggy J.; Pluym, Tammy P.; Young, Ralph W.; Gupta, Vipin P.; Nielson, Gregory N.

Thin and small form factor cells have been researched lately by several research groups around the world due to possible lower assembly costs and reduced material consumption with higher efficiencies. Given the popularity of these devices, it is important to have detailed information about the behavior of these devices. Simulation of fabrication processes and device performance reveals some of the advantages and behavior of solar cells that are thin and small. Three main effects were studied: the effect of surface recombination on the optimum thickness, efficiency, and current density, the effect of contact distance on the efficiency for thin cells, and lastly the effect of surface recombination on the grams per Watt-peak. Results show that high efficiency can be obtained in thin devices if they are well-passivated and the distance between contacts is short. Furthermore, the ratio of grams per Watt-peak is greatly reduced as the device is thinned.

Cruz-Campa, Jose L.; Nielson, Gregory N.; Okandan, Murat O.; Sanchez, Carlos A.; Resnick, Paul J.; Clews, Peggy J.; Pluym, Tammy P.; Gupta, Vipin P.

We present a newly developed microsystem enabled, back-contacted, shade-free GaAs solar cell. Using microsystem tools, we created sturdy 3 {micro}m thick devices with lateral dimensions of 250 {micro}m, 500 {micro}m, 1 mm, and 2 mm. The fabrication procedure and the results of characterization tests are discussed. The highest efficiency cell had a lateral size of 500 {micro}m and a conversion efficiency of 10%, open circuit voltage of 0.9 V and a current density of 14.9 mA/cm{sup 2} under one-sun illumination.

Cruz-Campa, Jose L.; Nielson, Gregory N.; Okandan, Murat O.; Sanchez, Carlos A.; Resnick, Paul J.; Clews, Peggy J.; Pluym, Tammy P.; Gupta, Vipin P.

We present a newly developed microsystem enabled, back-contacted, shade-free GaAs solar cell. Using microsystem tools, we created sturdy 3 {micro}m thick devices with lateral dimensions of 250 {micro}m, 500 {micro}m, 1 mm, and 2 mm. The fabrication procedure and the results of characterization tests are discussed. The highest efficiency cell had a lateral size of 500 {micro}m and a conversion efficiency of 10%, open circuit voltage of 0.9 V and a current density of 14.9 mA/cm{sup 2} under one-sun illumination.

Solar Energy Materials and Solar Cells

Cruz-Campa, Jose L.; Okandan, Murat O.; Resnick, Paul J.; Grubbs, Robert K.; Clews, Peggy J.; Pluym, Tammy P.; Gupta, Vipin P.; Nielson, Gregory N.

Abstract not provided.

Okandan, Murat O.; Cruz-Campa, Jose L.; Resnick, Paul J.; Pluym, Tammy P.; Clews, Peggy J.; Sweatt, W.C.; Gupta, Vipin P.; Nielson, Gregory N.

Abstract not provided.

Okandan, Murat O.; Cruz-Campa, Jose L.; Resnick, Paul J.; Pluym, Tammy P.; Clews, Peggy J.; Lentine, Anthony L.; Sweatt, W.C.; Gupta, Vipin P.

Abstract not provided.

Cruz-Campa, Jose L.; Pluym, Tammy P.; Resnick, Paul J.; Young, Ralph W.; Clews, Peggy J.; Okandan, Murat O.; Grubbs, Robert K.; Nielson, Gregory N.

Abstract not provided.