Neutral atoms for 2-qubit QUBO
Abstract not provided.
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
We present the design, fabrication, and characterization of a pixelated, hyperspectral arrayed component for Focal Plane Array (FPA) integration in the Long-Wave IR. This device contains tens of pixels within a single super-pixel which is tiled across the extent of the FPA. Each spectral pixel maps to a single FPA pixel with a spectral FWHM of 200nm. With this arrayed approach, remote sensing data may be accumulated with a non-scanning, "snapshot" imaging system. This technology is flexible with respect to individual pixel center wavelength and to pixel position within the array. Moreover, the entire pixel area has a single wavelength response, not the integrated linear response of a graded cavity thickness design. These requirements bar tilted, linear array technologies where the cavity length monotonically increases across the device. © 2010 Copyright SPIE - The International Society for Optical Engineering.
Optics InfoBase Conference Papers
For practical quantum computing, it will be necessary to detect the fluorescence from many trapped ions. We describe a design and integration approach using microoptics to couple this fluorescence into an array of optical fibers. © 2010 Optical Society of America.
For practical quantum computing, it will be necessary to detect the fluorescence from many trapped ions. We describe a design and integration approach using micro-optics to couple this fluorescence into an array of optical fibers.
Applied Physics B
Abstract not provided.
Optics Letters
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
In this work, we describe the most recent progress towards the device modeling, fabrication, testing and system integration of active resonant subwavelength grating (RSG) devices. Passive RSG devices have been a subject of interest in subwavelength-structured surfaces (SWS) in recent years due to their narrow spectral response and high quality filtering performance. Modulating the bias voltage of interdigitated metal electrodes over an electrooptic thin film material enables the RSG components to act as actively tunable high-speed optical filters. The filter characteristics of the device can be engineered using the geometry of the device grating and underlying materials. Using electron beam lithography and specialized etch techniques, we have fabricated interdigitated metal electrodes on an insulating layer and BaTiO3 thin film on sapphire substrate. With bias voltages of up to 100V, spectral red shifts of several nanometers are measured, as well as significant changes in the reflected and transmitted signal intensities around the 1.55um wavelength. Due to their small size and lack of moving parts, these devices are attractive for high speed spectral sensing applications. We will discuss the most recent device testing results as well as comment on the system integration aspects of this project. © 2010 Copyright SPIE - The International Society for Optical Engineering.
We will present results of the design, operation, and performance of surface ion micro-traps fabricated at Sandia. Recent progress in the testing of the micro-traps will be highlighted, including successful motional control of ions and the validation of simulations with experiments.
Abstract not provided.
Abstract not provided.
Plasmonic structures open up new opportunities in photonic devices, sometimes offering an alternate method to perform a function and sometimes offering capabilities not possible with standard optics. In this LDRD we successfully demonstrated metal coatings on optical surfaces that do not adversely affect the transmission of those surfaces at the design frequency. This technology could be applied as an RF noise blocking layer across an optical aperture or as a method to apply an electric field to an active electro-optic device without affecting optical performance. We also demonstrated thin optical absorbers using similar patterned surfaces. These infrared optical antennas show promise as a method to improve performance in mercury cadmium telluride detectors. Furthermore, these structures could be coupled with other components to lead to direct rectification of infrared radiation. This possibility leads to a new method for infrared detection and energy harvesting of infrared radiation.
Abstract not provided.
Abstract not provided.
Conductive polymers have become an extremely useful class of materials for many optical applications. We have developed an electrochemical growth method for depositing highly conductive ({approx}100 S/cm) polypyrrole. Additionally, we have adapted advanced fabrication methods for use with the polypyrrole resulting in gratings with submicron features. This conductive polymer micro-wire grid provides an optical polarizer with unique properties. When the polymer is exposed to ionizing radiation, its conductivity is affected and the polarization properties of the device, specifically the extinction ratio, change in a corresponding manner. This change in polarization properties can be determined by optically interrogating the device, possibly from a remote location. The result is a passive radiation-sensitive sensor with very low optical visibility. The ability to interrogate the device from a safe standoff distance provides a device useful in potentially dangerous environments. Also, the passive nature of the device make it applicable in applications where external power is not available. We will review the polymer deposition, fabrication methods and device design and modeling. The characterization of the polymer's sensitivity to ionizing radiation and optical testing of infrared polarizers before and after irradiation will also be presented. These experimental results will highlight the usefulness of the conductive infrared polarizer to many security and monitoring applications.
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
We investigate the advantages of employing a fiber faceplate in a snapshot polarimetry system. Our previous work at Sandia National Laboratories indicates that diffraction and propagation between the micropolarizer array, the micro-waveplate array, and the Focal Plane Array (FPA) degrade performance, as quantified by the extinction ratio1,2. Crosstalk between adjacent pixels due to diffraction increases uncertainty of the measured polarization states in a scene of interest. These issues are exacerbated in the long-wavelength regime and as FPA pixel dimensions decrease. One solution, since it minimizes propagation distance, is to construct the micropolarizer and micro-waveplate arrays on a single substrate surface and to place this combination on the FPA3. This solution is a significant fabrication challenge and decreases yield due to its serial assembly nature. An alternative solution that would improve yield is to fabricate the micropolarizer on top of a fiber faceplate, place the faceplate on the FPA with the micropolarizer facing away, then place the waveplate array on top of the micropolarizer. The optical field that passes through the plane of the microwaveplate array and the micropolarizer array is guided to the FPA plane, without suffering diffraction effects associated with free-space propagation. We will quantify the utility of these proposed configurations with predicted imaging polarimetric system extinction ratios.
Proceedings of SPIE - The International Society for Optical Engineering
Conductive polymers have become an extremely useful class of materials for many optical applications. We have developed an electrochemical growth method for depositing highly conductive (~100 S/cm) polypyrrole. Additionally, we have adapted advanced fabrication methods for use with the polypyrrole resulting in gratings with submicron features. This conductive polymer micro-wire grid provides an optical polarizer with unique properties. When the polymer is exposed to ionizing radiation, its conductivity is affected and the polarization properties of the device, specifically the extinction ratio, change in a corresponding manner. This change in polarization properties can be determined by optically interrogating the device, possibly from a remote location. The result is a passive radiation-sensitive sensor with very low optical visibility. The ability to interrogate the device from a safe standoff distance provides a device useful in potentially dangerous environments. Also, the passive nature of the device make it applicable in applications where external power is not available. We will review the polymer deposition, fabrication methods and device design and modeling. The characterization of the polymer's sensitivity to ionizing radiation and optical testing of infrared polarizers before and after irradiation will also be presented. These experimental results will highlight the usefulness of the conductive infrared polarizer to many security and monitoring applications.
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
We present simulations and measurements of a technology that can manipulate thermal angular and wavelength emission. This work is representative of Sandia National Laboratories' efforts to investigate advanced technologies that are not currently accessible for reasons such as risk, cost, or limited availability. The goal of this project is to demonstrate a passive thermal emission management surface that can tailor the direction of emission as well as the wavelength bands of emission. This new proposed technology enables thermal emission pattern management by structuring the surface. This structuring may be in either the lateral or depth dimension. A lateral structuring consists of a shallow grating on a metal surface. This air/metal interface allows photon/plasmon coupling, which has been shown to coherently and preferentially emit at certain wavelengths.
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
Remote detection of radiation is a difficult problem due to the 1/r 2 fall-off Recent advances in polymer research and nanoscale fabrication methods along with advances in optical Polarimetrie remote sensing systems suggest a solution. The basic device uses a micro-wiregrid infrared polarizer fabricated in conductive polymer. When the polymer is exposed to hard radiation, its conductivity will be affected and the polarization properties of the device will change in a corresponding manner. This change in polarization properties can be determined by optically interrogating the device, possibly from a remote location. We will report on the development of a radiation-sensitive passive dosimeter polymer with very low optical visibility. Progress on material development, lithographic fabrication and optical characterization will be presented.
Abstract not provided.
SPIE Newsroom
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
We developed techniques to design higher efficiency diffractive optical elements (DOEs) with large numerical apertures (NA) for quantum computing and quantum information processing. Large NA optics encompass large solid angles and thus have high collection efficiencies. Qubits in ion trap architectures are commonly addressed and read by lasers1. Large-scale ion-trap quantum computing2 will therefore require highly parallel optical interconnects. Qubit readout in these systems requires detecting fluorescence from the nearly isotropic radiation pattern of single ions, so efficient readout requires optical interconnects with high numerical aperture. Diffractive optical element fabrication is relatively mature and utilizes lithography to produce arrays compatible with large-scale ion-trap quantum computer architectures. The primary challenge of DOEs is the loss associated with diffraction efficiency. This is due to requirements for large deflection angles, which leads to extremely small feature sizes in the outer zone of the DOE. If the period of the diffractive is between λ (the free space wavelength) and 10λ, the element functions in the vector regime. DOEs in this regime, particularly between 1.5λ and 4λ, have significant coupling to unwanted diffractive orders, reducing the performance of the lens. Furthermore, the optimal depth of the zones with periods in the vector regime differs from the overall depth of the DOE. We will present results indicating the unique behaviors around the 1.5λ and 4λ periods and methods to improve the DOE performance.
Proceedings of SPIE - The International Society for Optical Engineering
We present the design and initial fabrication for a wavelength-agile, high-speed modulator that enables a long-term vision for the THz Scannerless Range Imaging (SRI) sensor. This modulator takes the place of the currently utilized SRI micro-channel plate which is limited to photocathode sensitive wavelengths (primarily in the visible and near-IR regimes). The new component is an active Resonant Subwavelength Grating (RSG). An RSG functions as an extremely narrow wavelength and angular band reflector, or mode selector. Theoretical studies predict that the infinite, laterally-extended RSG can reflect 100% of the resonant light while transmitting the balance of the other wavelengths. Previous experimental realization of these remarkable predictions has been impacted primarily by fabrication challenges. Even so, we have demonstrated large-area (1.0mm) passive RSG reflectivity as high as 100.2%, normalized to deposited gold. In this work, we transform the passive RSG design into an active laser-line modulator.
Proceedings of SPIE - The International Society for Optical Engineering
Conductive polymers have become an extremely useful class of materials for many optical applications. Additionally, advanced fabrication methods have led to the development of metal based micro-wiregrid polarizers utilizing submicron features. Adapting these fabrication approaches for use with polymer materials leads to optical polarizers with unique properties. The patterning of conductive polymers with the small features required for wiregrid polarizers leads to several challenges. First, the deposition of the polymer must provide a layer thick enough to provide a polarizer with a useful extinction ratio that also has high conductivity and environmental stability. Two deposition approaches have been investigated, spin coating and electrochemical growth, and results of this work will be presented. Also, the polymers considered here are not compatible with basic photoresist processes. Various tactics have been examined to overcome this difficulty including the use of hard bakes of the polymer, protective overcoats and patterned growth. The adaptations required for successfully patterning the polymer will be reviewed. Finally, fabricated devices will be shown and their optical characterization presented.
In this late-start LDRD, we will present a design for a wavelength-agile, high-speed modulator that enables a long-term vision for the THz Scannerless Range Imaging (SRI) sensor. It takes the place of the currently-utilized SRI micro-channel plate which is limited to photocathode sensitive wavelengths (primarily in the visible and near-IR regimes). Two of Sandia's successful technologies--subwavelength diffractive optics and THz sources and detectors--are poised to extend the capabilities of the SRI sensor. The goal is to drastically broaden the SRI's sensing waveband--all the way to the THz regime--so the sensor can see through image-obscuring, scattering environments like smoke and dust. Surface properties, such as reflectivity, emissivity, and scattering roughness, vary greatly with the illuminating wavelength. Thus, objects that are difficult to image at the SRI sensor's present near-IR wavelengths may be imaged more easily at the considerably longer THz wavelengths (0.1 to 1mm). The proposed component is an active Resonant Subwavelength Grating (RSG). Sandia invested considerable effort on a passive RSG two years ago, which resulted in a highly-efficient (reflectivity greater than gold), wavelength-specific reflector. For this late-start LDRD proposal, we will transform the passive RSG design into an active laser-line reflector.
The goal of this project is to fabricate a four-state pixelated subwavelength optical device that enables mid-wave infrared (MWIR) or long-wave infrared (LWIR) snapshot polarimetric imaging. The polarization information can help to classify imaged materials and identify objects of interest for numerous remote sensing and military applications. While traditional, sequential polarimetric imaging produces scenes with polarization information through a series of assembled images, snapshot polarimetric imaging collects the spatial distribution of all four Stokes parameters simultaneously. In this way any noise due to scene movement from one frame to the next is eliminated. We fabricated several arrays of subwavelength components for MWIR polarization imaging applications. Each pixel unit of the array consists of four elements. These elements are micropolarizers with three or four different polarizing axis orientations. The fourth element sometimes has a micro birefringent waveplate on the top of one of the micropolarizers. The linear micropolarizers were fabricated by patterning nano-scale metallic grids on a transparent substrate. A large area birefringent waveplate was fabricated by deeply etching a subwavelength structure into a dielectric substrate. The principle of making linear micropolarizers for long wavelengths is based upon strong anisotropic absorption of light in the nano-metallic grid structures. The nano-metallic grid structures are patterned with different orientations; therefore, the micropolarizers have different polarization axes. The birefringent waveplate is a deeply etched dielectric one-dimensional subwavelength grating; therefore two orthogonally polarized waves have different phase delays. Finally, in this project, we investigated the near field and diffractive effects of the subwavelength element apertures upon detection. The fabricated pixelated polarizers had a measured extinction ratios larger than 100:1 for pixel sizes in the order of 15 {micro}m by 15 {micro}m that exceed by 7 times previously reported devices. The fabricated birefringent diffractive waveplates had a total variation of phase delay rms of 9.41 degrees with an average delay of 80.6 degrees across the MWIR spectral region. We found that diffraction effects change the requirement for separation between focal plane arrays (FPA) micropolarizer arrays and birefringent waveplates arrays, originally in the order of hundreds of microns (which are the typical substrate thickness) to a few microns or less. This new requirement leads us to propose new approaches to fabricate these devices.
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
Polarimetric imaging applications at the 2 to 5 μm or Mid-Wave Infrared (MWIR) range use large pixel-count focal plane arrays (FPA) with small pixel size. This project is centered in designing, fabricating and testing micropolarizers that work in that wavelength regime and intended for that type of FPAs. The micro-polarizers will be used in conjunction with a FPA in snapshot mode and will be in the near field of the imaging device. The pixel pitches for some commercial FPAs are small enough that the finite apertures of the polarizing devices may significantly affect their performance given that their aperture size varies between 3 and 5 waves. We are interested in understanding the effect on extinction ratio due to variations in the edge terminations of a polarizer with a small aperture. Edge terminations are the spaces between the first or last wire with the perimeter of the aperture of the polarizer. While this parameter has negligible effects on a larger polarizer, it will be significant for apertures that are about 3 to 5 waves. We will present data that indicates significant variation in performance due to edge terminations.
Proceedings of SPIE - The International Society for Optical Engineering
Subwavelength diffractive features etched into a substrate lead to form birefringence that can be utilized to produce polarization sensitive elements such as waveplates. Using etched features allows for the development of pixilated devices to be used in conjunction with focal plane arrays in polarimetric imaging systems. Typically, the main drawback from using diffractive devices is their high sensitivity to wavelength. Taking advantage of the dispersion of the form birefringence, diffractive waveplates with good achromatic characteristics can be designed. We will report on diffractive waveplates designed for minimal phase retardation error across the 2-5 micron spectral regime. The required fabrication processes of the sub-wavelength feature sizes will be discussed as well as the achromatic performance and transmission efficiency of final devices. Previous work in this area has produced good results over a subset of this wavelength band, but designing for this extended band is particularly challenging. In addition, the effect of the finite size of the apertures of the pixilated devices is of particular interest since they are designed to be used in conjunction with a detector array. The influence of small aperture sizes will also be investigated.
Proceedings of SPIE - The International Society for Optical Engineering
We report here on an effort to design and fabricate a polarization splitter that utilizes form-birefringence to disperse an input beam as a function of polarization content as well as wavelength spectrum. Our approach is unique in the polarization beam splitting geometry and the potential for tailoring the polarized beams' phase fronts to correct aberrations or add focusing power. A first cut design could be realized with a chirped duty cycle grating at a single etch depth. However, this approach presents a considerable fabrication obstacle since etch depths are a strong function of feature size, or grating period. We fabricated a period of 1.0 micron form-birefringent component, with a nominal depth of 1.7 microns, in GaAs using a CAIBE system with a 2-inch ion beam source diameter. The gas flows, ion energy, and sample temperature were all optimized to yield the desired etch profile.
Abstract not provided.
This diffractive optical element (DOE) LDRD is divided into two tasks. In Task 1, we develop two new DOE technologies: (1) a broad wavelength band effective anti-reflection (AR) structure and (2) a design tool to encode dispersion and polarization information into a unique diffraction pattern. In Task 2, we model, design, and fabricate a subwavelength polarization splitter. The first technology is an anti-reflective (AR) layer that may be etched into the DOE surface. For many wavelengths of interest, transmissive silicon DOEs are ideal. However, a significant portion of light (30% from each surface) is lost due to Fresnel reflection. To address this issue, we investigate a subwavelength, surface relief structure that acts as an effective AR coating. The second DOE component technology in Task 1 is a design tool to determine the optimal DOE surface relief structure that can encode the light's degree of dispersion and polarization into a unique spatial pattern. Many signals of interest have unique spatial, temporal, spectral, and polarization signatures. The ability to disperse the signal into a unique diffraction pattern would result in improved signal detection sensitivity with a simultaneous reduction in false alarm. Task 2 of this LDRD project is to investigate the modeling, design, and fabrication of subwavelength birefringent devices for polarimetric spectral sensing and imaging applications. Polarimetric spectral sensing measures the spectrum of the light and polarization state of light at each wavelength simultaneously. The capability to obtain both polarization and spectral information can help develop target/object signature and identify the target/object for several applications in NP&MC and national security.
Optoelectronic microsystems are more and more prevalent as researchers seek to increase transmission bandwidths, implement electrical isolation, enhance security, or take advantage of sensitive optical sensing methods. Board level photonic integration techniques continue to improve, but photonic microsystems and fiber interfaces remain problematic, especially upon size reduction. Optical fiber is unmatched as a transmission medium for distances ranging from tens of centimeters to kilometers. The difficulty with using optical fiber is the small size of the core (approximately 9 {micro}m for the core of single mode telecommunications fiber) and the tight requirement on spot size and input numerical aperture (NA). Coupling to devices such as vertical cavity emitting lasers (VCSELs) and photodetectors presents further difficulties since these elements work in a plane orthogonal to the electronics board and typically require additional optics. This leads to the need for a packaging solution that can incorporate dissimilar materials while maintaining the tight alignment tolerances required by the optics. Over the course of this LDRD project, we have examined the capabilities of components such as VCSELs and photodetectors for high-speed operation and investigated the alignment tolerances required by the optical system. A solder reflow process has been developed to help fulfill these packaging requirements and the results of that work are presented here.
Light propagating through a subwavelength aperture can be dramatically increased by etching a grating in the metal around the hole. Moreover, light that would typically broadly diverge when passing through an unpatterned subwavelength hole can be directed into a narrow beam by utilizing a specific pattern around the aperture. While the increased transmission and narrowed angular emission appear to defy far-field diffraction theory, they are consistent with a fortuitous plasmon/photon coupling. In addition, the coupling between photons and surface plasmons affects the emissivity of a surface comprised of such structures. These properties are useful across several strategic areas of interest to Sandia. A controllable emission spectrum could benefit satellite and military application areas. Photolithography and near-field microscopy are natural applications for a system that controls light beyond the diffraction limit in a manner that is easily parallelizable. Over the one year of this LDRD, we have built or modified the numerical tools necessary to model such structures. These numerical codes and the knowledge base for using them appropriately will be available in the future for modeling work on surface plasmons or other optical modeling at Sandia. Using these tools, we have designed and optimized structures for various transmission or emission properties. We demonstrate the ability to design a metallic skin with an emissivity peak at a pre-determined wavelength in the spectrum. We optimize structures for maximum light transmission and show transmitted beams that beat the far-field diffraction limit.
Proceedings of SPIE - The International Society for Optical Engineering
Resonant subwavelength gratings (RSGs) may be used as narrow-band wavelength and angular reflectors. Rigorous coupled wave analysis (RCWA) predicts 100% reflectivity at the resonant frequency of an incident plane wave from an RSG of infinite extent. For devices of finite extent or for devices illuminated with a finite beam, the peak reflectivity drops, coupled with a broadening of the peak. More complex numerical methods are required to model these finite effects. We have modeled finite devices and finite beams with a two-dimensional finite difference Helmholtz equation. The effect of finite grating aperture and finite beam size are investigated. Specific cases considered include Gaussian beam illumination of an infinite grating, Gaussian illumination of a finite grating, and plane wave illumination of an apertured grating. For a wide grating with a finite Gaussian beam, it is found that the reflectivity is an exponential function of the grating width. Likewise, for an apertured grating the reflectivity shows an exponential decay with narrowing aperture size. Results are compared to other methods, including plane wave decomposition of Gaussian beams using RCWA for the case of a finite input beam, and semi-analytical techniques for the case of the apertured grating.
This report describes a passive, optical component called resonant subwavelength gratings (RSGs), which can be employed as one element in an RSG array. An RSG functions as an extremely narrow wavelength and angular band reflector, or mode selector. Theoretical studies predict that the infinite, laterally-extended RSG can reflect 100% of the resonant light while transmitting the balance of the other wavelengths. Experimental realization of these remarkable predictions has been impacted primarily by fabrication challenges. Even so, we will present large area (1.0mm) RSG reflectivity as high as 100.2%, normalized to deposited gold. Broad use of the RSG will only truly occur in an accessible micro-optical system. This program at Sandia is a normal incidence array configuration of RSGs where each array element resonates with a distinct wavelength to act as a dense array of wavelength- and mode-selective reflectors. Because of the array configuration, RSGs can be matched to an array of pixels, detectors, or chemical/biological cells for integrated optical sensing. Micro-optical system considerations impact the ideal, large area RSG performance by requiring finite extent devices and robust materials for the appropriate wavelength. Theoretical predictions and experimental measurements are presented that demonstrate the component response as a function of decreasing RSG aperture dimension and off-normal input angular incidence.
Abstract not provided.
This project combined nanocomposite materials with microfabricated optical device structures for the development of microsensor arrays. For the nanocomposite materials we have designed, developed, and characterized self-assembling, organic/inorganic hybrid optical sensor materials that offer highly selective, sensitive, and reversible sensing capability with unique hierarchical nanoarchitecture. Lipid bilayers and micellar polydiacetylene provided selective optical response towards metal ions (Pb(II), Hg(II)), a lectin protein (Concanavalin A), temperature, and organic solvent vapor. These materials formed as composites in silica sol-gels to impart physical protection of the self-assembled structures, provide a means for thin film surface coatings, and allow facile transport of analytes. The microoptical devices were designed and prepared with two- and four-level diffraction gratings coupled with conformal gold coatings on fused silica. The structure created a number of light reflections that illuminated multiple spots along the silica surface. These points of illumination would act as the excitation light for the fluorescence response of the sensor materials. Finally, we demonstrate an integrated device using the two-level diffraction grating coupled with the polydiacetylene/silica material.
Abstract not provided.
Proceedings of SPIE - The International Society for Optical Engineering
The design and on-going fabrication of an opto-electro-mechanical microsystem that acts as a four-function optical fiber switch will be presented. The four functions of the 2×2 optical switch include 1) Normal mode, where channel A and channel B pass light straight through, 2) Loopback mode, where light originating in channel A is detected in the B leg, 3) Monitor A mode, where a probe pulse is inserted into channel B and any reflections are detected in the A leg, and 4) Monitor B mode, the compliment of 3) above. The Monitor A and Monitor B modes allow the microsystem to operate as an Optical Time Domain Reflectometer (OTDR). High spatial frequency gratings etched in fused silica configure the light beams through free-space substrate-mode propagation. The design for an OTDR-mode transmission grating that normally passes light from an incidence angle of 45 degrees within the silica substrate as well as passes light from a normal incidence straight through the silica will be discussed. A miniature commercial drive motor, positioned with LIGA alignment plates, rotates the optical grating disk into one of the four implemented function positions. The impact of required tolerances and packaging limitations on the optics, LIGA alignment plates, and the complete microsystem will be presented.
A figure of merit for optimization of a complete Stokes polarimeter based on its measurement matrix is described from the standpoint of singular value decomposition and analysis of variance. It is applied to optimize a system featuring a rotatable retarder and fixed polarizer, and to study the effects of non-ideal retarder properties. A retardance of 132{degree} (approximately three-eighths wave) and retarder orientation angles of {+-}51.7{degree} and {+-}15.1{degree} are favorable when four measurements are used. An achromatic, form-birefringent retarder for the 3--5 {micro}m spectral region has been fabricated and characterized. The effects of non-idealities in the form-birefringent retarder are moderate, and performance superior to that of a quarter-wave plate is expected.
Optics Letters
We present two figures of merit based on singular value decomposition, which can be used to assess the noise immunity of a complete Stokes polarimeter. These are used to optimize a polarimeter featuring a rotatable retarder and a fixed polarizer. A retardance of 132° (approximately three-eighths wave) and retarder orientation angles of ±51.7° and ±15.1° are found to be optimal when four measurements are used. Use of this retardance affords a factor-of-1.5 improvement in signal-to-noise ratio over systems employing a quarter-wave plate. A geometric means of visualizing the optimization process is discussed, and the advantages of the use of additional measurements are investigated. No advantage of using retarder orientation angles spaced uniformly through 360° is found over repeated measurements made at the four retarder orientation angles. © 2000 Optical Society of America .
Grating light reflection spectroscopy (GLRS) is an emerging technique for spectroscopic analysis and sensing. A transmission diffraction grating is placed in contact with the sample to be analyzed, and an incident light beam is directed onto the grating. At certain angles of incidence, some of the diffracted orders are transformed from traveling waves to evanescent waves. This occurs at a specific wavelength that is a function of the grating period and the complex index of refraction of the sample. The intensities of diffracted orders are also dependent on the sample's complex index of refraction. The authors describe the use of GLRS, in combination with electrochemical modulation of the grating, for the detection of trace amounts of aromatic hydrocarbons. The diffraction grating consisted of chromium lines on a fused silica substrate. The depth of the grating lines was 1 {micro}m, the grating period was 1 {micro}m, and the duty cycle was 50%. Since chromium was not suitable for electrochemical modulation of the analyte concentration, a 200 nm gold layer was deposited over the entire grating. This gold layer slightly degraded the transmission of the grating, but provided satisfactory optical transparency for the spectroelectrochemical experiments. The grating was configured as the working electrode in an electrochemical cell containing water plus trace amounts of the aromatic hydrocarbon analytes. The grating was then electrochemically modulated via cyclic voltammetry waveforms, and the normalized intensity of the zero order reflection was simultaneously measured. The authors discuss the lower limits of detection (LLD) for two analytes, 7-dimethylamino-1,2-benzophenoxazine (Meldola's Blue dye) and 2,4,6-trinitrotoluene (TNT), probed with an incident HeNe laser beam ({lambda} = 543.5 nm) at an incident angle of 52.5{degree}. The LLD for 7-dimethylamino-1,2-benzophenoxazine is approximately 50 parts per billion (ppb), while the LLD for TNT is approximately 50 parts per million (ppm). The possible factors contributing to the differences in LLD for these analytes are discussed. This is the final report for a Sandia National Laboratories Laboratory Directed Research and Development (LDRD) project conducted during fiscal years 1998 and 1999 (case number 3518.190).
Proceedings of SPIE - The International Society for Optical Engineering
We have designed and assembled two generations of integrated micro-optical systems that deliver pump light and detect broadband laser-induced fluorescence in micro-fluidic chemical separation systems employing electrochromatography. The goal is to maintain the sensitivity attainable with larger, tabletop machines while decreasing package size and increasing throughput (by decreasing the required chemical volume). One type of micro-optical system uses vertical-cavity surface-emitting lasers (VCSELs) as the excitation source. Light from the VCSELs is relayed with four-level surface relief diffractive optical elements (DOEs) and delivered to the chemical volume through substrate-mode propagation. Indirect fluorescence from dye-quenched chemical species is collected and collimated with a high numerical aperture DOE. A filter blocks the excitation wavelength, and the resulting signal is detected as the chemical separation proceeds. Variations of this original design include changing the combination of reflective and transmissive DOEs and optimizing the high numerical aperture DOE with a rotationally symmetric iterative discrete on-axis algorithm. We will discuss the results of these implemented optimizations.