Publications

Hjalmarson, Harold P.; Kensek, Ronald P.; Magyar, Rudolph J.; Bondi, Robert J.

Abstract not provided.

Kensek, Ronald P.; Franke, Brian C.; Valdez, Greg D.

Abstract not provided.

Hjalmarson, Harold P.; Kensek, Ronald P.

Abstract not provided.

Drumm, Clifton R.; Bohnhoff, William J.; Fan, Wesley C.; Franke, Brian C.; Laub, Thomas W.; Kensek, Ronald P.

Abstract not provided.

Franke, Brian C.; Kensek, Ronald P.

This report describes efforts to automate the biasing of coupled electron-photon Monte Carlo particle transport calculations. The approach was based on weight-windows biasing. Weight-window settings were determined using adjoint-flux Monte Carlo calculations. A variety of algorithms were investigated for adaptivity of the Monte Carlo tallies. Tree data structures were used to investigate spatial partitioning. Functional-expansion tallies were used to investigate higher-order spatial representations.

Keith, Rodney L.; Kensek, Ronald P.

Abstract not provided.

Keith, Rodney L.; Kensek, Ronald P.

Abstract not provided.

Proposed for publication in Nuclear Science and Engineering.

Franke, Brian C.; Kensek, Ronald P.

Abstract not provided.

Keith, Rodney L.; Kensek, Ronald P.

Abstract not provided.

Kensek, Ronald P.; Youchison, Dennis L.; Ulrickson, M.A.

Abstract not provided.

Nuclear Technology

Franke, Brian C.; Kensek, Ronald P.

Abstract not provided.

Franke, Brian C.; Kensek, Ronald P.

Abstract not provided.

Franke, Brian C.; Kensek, Ronald P.; Laub, Thomas W.

ITS is a powerful and user-friendly software package permitting state-of-the-art Monte Carlo solution of lineartime-independent coupled electron/photon radiation transport problems, with or without the presence of macroscopic electric and magnetic fields of arbitrary spatial dependence. Our goal has been to simultaneously maximize operational simplicity and physical accuracy. Through a set of preprocessor directives, the user selects one of the many ITS codes. The ease with which the makefile system is applied combines with an input scheme based on order-independent descriptive keywords that makes maximum use of defaults and internal error checking to provide experimentalists and theorists alike with a method for the routine but rigorous solution of sophisticated radiation transport problems. Physical rigor is provided by employing accurate cross sections, sampling distributions, and physical models for describing the production and transport of the electron/photon cascade from 1.0 GeV down to 1.0 keV. The availability of source code permits the more sophisticated user to tailor the codes to specific applications and to extend the capabilities of the codes to more complex applications. Version 6, the latest version of ITS, contains (1) improvements to the ITS 5.0 codes, and (2) conversion to Fortran 90. The general user friendliness of the software has been enhanced through memory allocation to reduce the need for users to modify and recompile the code.

Franke, Brian C.; Kensek, Ronald P.; Laub, Thomas W.

ITS is a powerful and user-friendly software package permitting state-of-the-art Monte Carlo solution of linear time-independent coupled electron/photon radiation transport problems, with or without the presence of macroscopic electric and magnetic fields of arbitrary spatial dependence. Our goal has been to simultaneously maximize operational simplicity and physical accuracy. Through a set of preprocessor directives, the user selects one of the many ITS codes. The ease with which the makefile system is applied combines with an input scheme based on order-independent descriptive keywords that makes maximum use of defaults and internal error checking to provide experimentalists and theorists alike with a method for the routine but rigorous solution of sophisticated radiation transport problems. Physical rigor is provided by employing accurate cross sections, sampling distributions, and physical models for describing the production and transport of the electron/photon cascade from 1.0 GeV down to 1.0 keV. The availability of source code permits the more sophisticated user to tailor the codes to specific applications and to extend the capabilities of the codes to more complex applications. Version 5.0, the latest version of ITS, contains (1) improvements to the ITS 3.0 continuous-energy codes, (2) multigroup codes with adjoint transport capabilities, (3) parallel implementations of all ITS codes, (4) a general purpose geometry engine for linking with CAD or other geometry formats, and (5) the Cholla facet geometry library. Moreover, the general user friendliness of the software has been enhanced through increased internal error checking and improved code portability.

Maenchen, John E.; Kensek, Ronald P.; Fan, Wesley C.

The mission of Radiographic Integrated Test Stand-6 (RITS-6) facility is to provide the underlying science and technology for pulsed-power-driven flash radiographic X-ray sources for the National Nuclear Security Administration (NNSA). Flash X-ray radiography is a penetrating diagnostic to discern the internal structure in dynamic experiments. Short (~50 nanosecond (ns) duration) bursts of very high intensity Xrays from mm-scale source sizes are required at a variety of voltages to address this mission. RITS-6 was designed and is used to both develop the accelerator technology needed for these experiments and serves as the principal test stand to develop the high intensity electron beam diodes that generate the required X-ray sources. RITS is currently in operation with three induction cavities (RITS-3) with a maximum voltage output of 5.5 MV and is classified as a low hazard non-nuclear facility in accordance with CPR 400.1.1, Chapter 13, Hazards Identification/Analysis and Risk Management. The facility will be expanded from three to six cavities (RITS-6) effectively doubling the operating voltage. The increase in the operating voltage to above 10 MV has resulted in RITS-6 being classified as an accelerator facility. RITS-6 will come under DOE Order 420.2B, Safety of Accelerator Facilities. The hazards of RITS are detailed in the "Safety Assessment Document for the Radiographic Integrated Test Stand Facility." The principal non-industrial hazard is prompt x-ray radiation. As the operating voltage is increased, both the penetration power and the total amount (dose) of x-rays are increased, thereby increasing the risk to local personnel. Fixed site shielding (predominantly concrete walls and a steel/lead skyshine shield) is used to attenuate these x-rays and mitigate this risk. This SAND Report details the anticipated x-ray doses, the shielding design, and the anticipated x-ray doses external to this shielding structure both in areas where administrative access control restricts occupation and in adjacent uncontrolled areas.

Laub, Thomas W.; Kensek, Ronald P.; Franke, Brian C.; Lorence, Leonard L.; Quirk, Thomas J.

Abstract not provided.

Kensek, Ronald P.; Franke, Brian C.; Laub, Thomas W.; Lorence, Leonard L.; Martin, Matthew

Abstract not provided.

Kensek, Ronald P.; Franke, Brian C.; Laub, Thomas W.; Lorence, Leonard L.; Martin, Matthew

Abstract not provided.

Lorence, Leonard L.; Kensek, Ronald P.

Abstract not provided.

Kensek, Ronald P.; Franke, Brian C.; Laub, Thomas W.

This document describes the modeling of the physics (and eventually features) in the Integrated TIGER Series (ITS) codes [Franke 04] which is largely pulled from various sources in the open literature (especially [Seltzer 88], [Seltzer 91], [Lorence 89], [Halbleib 92]), although those sources often describe the ETRAN Code from which the physics engine of ITS is derived, not necessarily identical. This is meant to be an evolving document, with more coverage and detail as time goes on. As such, entire sections are still incomplete. Presently, this document covers the continuous-energy ITS codes with more completeness on photon transport (though electron transport will not be completely ignored). In particular, this document does not cover the Multigroup code, MCODES (externally applied electromagnetic fields), or high-energy phenomena (photon pair-production). In this version, equations are largely left to the references though they may be pulled in over time.

Lorence, Leonard L.; Franke, Brian C.; Kensek, Ronald P.; Laub, Thomas W.; Barteau, Lisa A.

This test plan describes the testing strategy for the ITS (Integrated-TIGER-Series) suite of codes. The processes and procedures for performing both verification and validation tests are described. ITS Version 5.0 was developed under the NNSA's ASC program and supports Sandia's stockpile stewardship mission.

Franke, Brian C.; Franke, Brian C.; Kensek, Ronald P.; Laub, Thomas W.; Lorence, Leonard L.; Fan, Wesley C.; Valdez, Greg D.; Mehlhorn, Thomas A.

ITS is a powerful and user-friendly software package permitting state of the art Monte Carlo solution of linear time-independent couple electron/photon radiation transport problems, with or without the presence of macroscopic electric and magnetic fields of arbitrary spatial dependence. Our goal has been to simultaneously maximize operational simplicity and physical accuracy. Through a set of preprocessor directives, the user selects one of the many ITS codes. The ease with which the makefile system is applied combines with an input scheme based on order-independent descriptive keywords that makes maximum use of defaults and internal error checking to provide experimentalists and theorists alike with a method for the routine but rigorous solution of sophisticated radiation transport problems. Physical rigor is provided by employing accurate cross sections, sampling distributions, and physical models for describing the production and transport of the electron/photon cascade from 1.0 GeV down to 1.0 keV. The availability of source code permits the more sophisticated user to tailor the codes to specific applications and to extend the capabilities of the codes to more complex applications. Version 5.0, the latest version of ITS, contains (1) improvements to the ITS 3.0 continuous-energy codes, (2)multigroup codes with adjoint transport capabilities, and (3) parallel implementations of all ITS codes. Moreover the general user friendliness of the software has been enhanced through increased internal error checking and improved code portability.