Publications

Abstract not provided.

Z-pinch plasmas are susceptible to the magnetic Rayleigh-Taylor (MRT) instability. The Z-pinch dynamic hohlraum (ZPDH), as implemented on the Z machine at Sandia National Laboratories, is composed of an annular tungsten plasma that implodes onto a coaxial foam convertor. The collision between tungsten Z pinch and convertor launches a strong shock in the foam. Shock heating generates radiation that is trapped by the tungsten Z pinch. The radiation can be used to implode a fuel-filled, inertial confinement fusion capsule. Hence, it is important to understand the influence that the MRT instability has on shock generation. This paper presents results of an investigation to determine the affect that the MRT instability has on characteristics of the radiating shock in a ZPDH. Experiments on Z were conducted in which a 1.5 cm tall, nested array (two arrays with initial diameters of 2.0 and 4.0 cm), tungsten wire plasma implodes onto a 5 mg/cc, CH{sub 2} foam convertor to create a {approx}135 eV dynamic hohlraum. X-ray pinhole cameras viewing along the ZPDH axis recorded time and space resolved images of emission produced by the radiating shock. These measurements showed that the shock remained circular to within +/-30-60 {micro}m as it propagated towards the axis, and that it was highly uniform along its height. The measured emission intensities are compared with synthetic x-ray images obtained by postprocessing two-dimensional, radiation magnetohydrodynamic simulations in which the amplitude of MRT perturbations is varied. These simulations accurately reproduce the measured shock trajectory and spatial profiles of the dynamic hohlraum interior emission as a function of time, even for large MRT amplitudes. Furthermore, the radiating shock remains relatively uniform in the axial direction regardless of the MRT amplitude because nonuniformities are tamped by the interaction of the tungsten Z-pinch plasma with the foam. These results suggest that inertial confinement fusion implosions driven by a ZPDH should be relatively free from random radiation symmetry variations produced by Z-pinch instabilities.

Progress in understanding the physics of dynamic-hohlraums is reviewed for a system capable of generating 13 TW of axial radiation for high temperature (>200 eV) radiation-flow experiments and ICF capsule implosions.

Trends in radiation production from dynamic-hohlraums driven by single and nested wire arrays were studied. The axial radiation developed from the interior of an imploding dynamic hohlraum target was compared with that generated using a standard nested array on Z. Measurements over a range of single-array masses showed a decrease in radiation power for masses above 3.5 mg.

The intense magnetic field generated in the 20 MA Z-machine is used to accelerate metallic flyer plates to high velocity (peak velocity {approx}20-30 km/s) for the purpose of generating strong shocks (peak pressure {approx}5-10 Mb) in equation of state experiments. We have used the Sandia developed, 2D magneto-hydrodynamic (MHD) simulation code ALEGRA to investigate the physics of accelerating flyer plates using multi-megabar magnetic drive pressures. Through detailed analysis of experimental data using ALEGRA, we developed a 2D, predictive MHD model for simulating material science experiments on Z. The ALEGRA MHD model accurately produces measured time dependent flyer velocities. Details of the ALEGRA model are presented. Simulation and experimental results are compared and contrasted for shots using standard and shaped current pulses whose peak drive pressure is {approx}2 Mb. Isentropic compression of Al to 1.7 Mb is achieved by shaping the current pulse.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Using intense magnetic pressure, a method was developed to launch flyer plates to velocities in excess of 20 km s{sup -1}. This technique was used to perform plate-impact, shock wave experiments on cryogenic liquid deuterium (LD{sub 2}) to examine its high-pressure equation of state (EOS). Using an impedance matching method, Hugoniot measurements were obtained in the pressure range of 22--100 GPa. The results of these experiments disagree with the previously reported Hugoniot measurements of LD2 in the pressure range above {approx}40 GPa, but are in good agreement with first principles, ab initio models for hydrogen and its isotopes.

Abstract not provided.

Abstract not provided.

Abstract not provided.