Publications

Abstract not provided.

Abstract not provided.

A novel multiphase shock tube has been constructed to test the interaction of a planar shock wave with a dense gas-solid field of particles. The particle field is generated by a gravity-fed method that results in a spanwise curtain of 100-micron particles producing a volume fraction of about 15%. Interactions with incident shock Mach numbers of 1.67 and 1.95 are reported. High-speed schlieren imaging is used to reveal the complex wave structure associated with the interaction. After the impingement of the incident shock, transmitted and reflected shocks are observed, which lead to differences in flow properties across the streamwise dimension of the curtain. Tens of microseconds after the onset of the interaction, the particle field begins to propagate downstream, and disperse. The spread of the particle field, as a function of its position, is seen to be nearly identical for both Mach numbers. Immediately downstream of the curtain, the peak pressures associated with the Mach 1.67 and 1.95 interactions are about 35% and 45% greater than tests without particles, respectively. For both Mach numbers tested, the energy and momentum fluxes in the induced flow far downstream are reduced by about 30-40% by the presence of the particle field.

Abstract not provided.

A novel multiphase shock tube has recently been developed to study particle dynamics in gas-solid flows having particle volume fractions that reside between the dilute and granular regimes. The method for introducing particles into the tube involves the use of a gravity-fed contoured particle seeder, which is capable of producing dense fields of spatially isotropic particles. The facility is capable of producing planar shocks having a maximum shock Mach number of about 2.1 that propagate into air at initially ambient conditions. The primary purpose of this new facility is to provide high fidelity data of shock-particle interactions in flows having particle volume fractions of about 1 to 50%. To achieve this goal, the facility drives a planar shock into a spatially isotropic field, or curtain, of particles. Experiments are conducted for two configurations where the particle curtain is either parallel to the spanwise, or the streamwise direction. Arrays of high-frequency-response pressure transducers are placed near the particle curtain to measure the attenuation and shape change of the shock owing to its interaction with the dense gas particle field. In addition, simultaneous high-speed imaging is used to visualize the impact of the shock on the particle curtain and to measure the particle motion induced downstream of the shock.

Abstract not provided.

Abstract not provided.

A novel multiphase shock tube to study particle dynamics in gas-solid flows has been constructed and tested. Currently, there is a gap in data for flows having particle volume fractions between the dusty and granular regimes. The primary purpose of this new facility is to fill that gap by providing high quality data of shock-particle interactions in flows having dense gas particle volume fractions. Towards this end, the facility aims to drive a shock into a spatially isotropic field, or curtain, of particles. Through bench-top experimentation, a method emerged for achieving this challenging task that involves the use of a gravity-fed contoured particle seeder. The seeding method is capable of producing fields of spatially isotropic particles having volume fractions of about 1 to 35%. The use of the seeder in combination with the shock tube allows for the testing of the impingement of a planar shock on a dense field of particles. The first experiments in the multiphase shock tube have been conducted and the facility is now operational.

Abstract not provided.

Veloce is a medium-voltage, high-current, compact pulsed power generator developed for isentropic and shock compression experiments. Because of its increased availability and ease of operation, Veloce is well suited for studying isentropic compression experiments (ICE) in much greater detail than previously allowed with larger pulsed power machines such as the Z accelerator. Since the compact pulsed power technology used for dynamic material experiments has not been previously used, it is necessary to examine several key issues to ensure that accurate results are obtained. In the present experiments, issues such as panel and sample preparation, uniformity of loading, and edge effects were extensively examined. In addition, magnetohydrodynamic (MHD) simulations using the ALEGRA code were performed to interpret the experimental results and to design improved sample/panel configurations. Examples of recent ICE studies on aluminum are presented.

Abstract not provided.

Abstract not provided.

Abstract not provided.

A new approach to explosive sample preparation is described in which microelectronics-related processing techniques are utilized. Fused silica and alumina substrates were prepared utilizing laser machining. Films of PETN were deposited into channels within the substrates by physical vapor deposition. Four distinct explosive behaviors were observed with high-speed framing photography by driving the films with a donor explosive. Initiation at hot spots was directly observed, followed by either energy dissipation leading to failure, or growth to a detonation. Unsteady behavior in velocity and structure was observed as reactive waves failed due to decreasing channel width. Mesoscale simulations were performed to assist in experiment development and understanding. We have demonstrated the ability to pattern these films of explosives and preliminary mesoscale simulations of arrays of voids showed effects dependent on void size and that detonation would not develop with voids below a certain size. Future work involves experimentation on deposited films with regular patterned porosity to elucidate mesoscale explosive behavior.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Explosive initiation and energy release have been studied in two sample geometries designed to minimize stochastic behavior in shock-loading experiments. These sample concepts include a design with explosive material occupying the hole locations of a close-packed bed of inert spheres and a design that utilizes infiltration of a liquid explosive into a well-defined inert matrix. Wave profiles transmitted by these samples in gas-gun impact experiments have been characterized by both velocity interferometry diagnostics and three-dimensional numerical simulations. Highly organized wave structures associated with the characteristic length scales of the deterministic samples have been observed. Initiation and reaction growth in an inert matrix filled with sensitized nitromethane (a homogeneous explosive material) result in wave profiles similar to those observed with heterogeneous explosives. Comparison of experimental and numerical results indicates that energetic material studies in deterministic sample geometries can provide an important new tool for validation of models of energy release in numerical simulations of explosive initiation and performance.

Binders such as Estane, Teflon, Kel F and HTPB are typically used in heterogeneous explosives to bond polycrystalline constituents together as an energetic composite. Combined theoretical and experimental studies are underway to unravel the mechanical response of these materials when subjected to isentropic compression loading. Key to this effort is the determination of appropriate constitutive and EOS property data at extremely high stress-strain states as required for detailed mesoscale modeling. The Sandia Z accelerator and associated diagnostics provides new insights into mechanical response of these nonreactive constituents via isentropic ramp-wave compression loading. Several thicknesses of samples, varied from 0.3 to 1.2 mm, were subjected to a ramp load of {approx}42 Kbar over 500 ns duration using the Sandia Z-machine. Profiles of transmitted ramp waves were measured at window interfaces using conventional VISAR. Shock physics analysis is then used to determine the nonlinear material response of the binder materials. In this presentation we discuss experimental and modeling details of the ramp wave loading ICE experiments designed specifically for binder materials.

Abstract not provided.

Abstract not provided.