This research objective of this EELDRD study was to learn to electrodeposit Pt Au alloys with independently controlled composition and grain size. What was accomplished was the capability to electrodeposit PtAu alloys with controlled composition and a nanocrysolline grain size. Nanocrystalline metals as a class and, specifically, the Pt0.9Au0.1 alloy developed in 2015-17 via sputtering at Sandia National Labs have clear advantages in strength, wear resistance, and fatigue tolerance over commercially-available structural alloys. With this capability befitting coating of complex components and implementable at existing vendors, we can upgrade the electrical contact component reliability of selected Labs systems.
Lithium metal is considered the "holy grail" of next-generation battery anodes. However, severe parasitic reactions at the lithium-electrolyte interface deplete the liquid electrolyte and the uncontrolled formation of high surface area and dendritic lithium during cycling causes rapid capacity fading and battery failure. Engineering a dendrite-free lithium metal anode is therefore critical for the development of long-life batteries using lithium anodes. In this study, we deposit a conformal, organic/inorganic hybrid coating, for the first time, directly on lithium metal using molecular layer deposition (MLD) to alleviate these problems. This hybrid organic/inorganic film with high cross-linking structure can stabilize lithium against dendrite growth and minimize side reactions, as indicated by scanning electron microscopy. We discovered that the alucone coating yielded several times longer cycle life at high current rates compared to the uncoated lithium and achieved a steady Coulombic efficiency of 99.5%, demonstrating that the highly cross-linking structured material with great mechanical properties and good flexibility can effectively suppress dendrite formation. The protected Li was further evaluated in lithium-sulfur (Li-S) batteries with a high sulfur mass loading of ∼5 mg/cm2. After 140 cycles at a high current rate of ∼1 mA/cm2, alucone-coated Li-S batteries delivered a capacity of 657.7 mAh/g, 39.5% better than that of a bare lithium-sulfur battery. These findings suggest that flexible coating with high cross-linking structure by MLD is effective to enable lithium protection and offers a very promising avenue for improved performance in the real applications of Li-S batteries.