Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Nanoantennas are an enabling technology for visible to terahertz components and may be used with a variety of detector materials. We have integrated subwavelength patterned metal nanoantennas with various detector materials for infrared detection: midwave infrared indium gallium arsenide antimonide detectors, longwave infrared graphene detectors, and shortwave infrared germanium detectors. Nanoantennas offer a means to make infrared detectors much thinner, thus lowering the dark current and improving performance. The nanoantenna converts incoming plane waves to more tightly bound and concentrated surface waves. The active material only needs to extend as far as these bound fields. In the case of graphene detectors, which are only one or two atomic layers thick, such field concentration is a necessity for usable device performance, as single pass absorption is insufficient. The nanoantenna is thus the enabling component of these thin devices. However nanoantenna integration and fabrication vary considerably across these platforms as do the considerations taken into account during design. Here we discuss the motivation for these devices and show examples for the three material systems. Characterization results are included for the midwave infrared detector. © 2014 SPIE.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We demonstrate the effects of integrating a nanoantenna to a midwave infrared (MWIR) focal plane array (FPA). We model an antenna-coupled photodetector with a nanoantenna fabricated in close proximity to the active material of a photodetector. This proximity allows us to take advantage of the concentrated plasmonic fields of the nanoantenna. The role of the nanoantenna is to convert free-space plane waves into surface plasmons bound to a patterned metal surface. These plasmonic fields are concentrated in a small volume near the metal surface. Field concentration allows for a thinner layer of absorbing material to be used in the photodetector design and promises improvements in cutoff wavelength and dark current (higher operating temperature). While the nanoantenna concept may be applied to any active photodetector material, we chose to integrate the nanoantenna with an InAsSb photodiode. The geometry of the nanoantenna-coupled detector is optimized to give maximal carrier generation in the active region of the photodiode, and fabrication processes must be altered to accommodate the nanoantenna structure. The intensity profiles and the carrier generation rates in the photodetector active layers are determined by finite element method simulations, and iteration between optical nanoantenna simulation and detector modeling is used to optimize the device structure. © 2012 SPIE.

Abstract not provided.

We have fabricated mid-wave infrared photodetectors containing InAsSb absorber regions and AlAsSb barriers in n-barrier-n (nBn) and n-barrier-p (nBp) configurations, and characterized them by current-voltage, photocurrent, and capacitance-voltage measurements in the 100-200 K temperature range. Efficient collection of photocurrent in the nBn structure requires application of a small reverse bias resulting in a minimum dark current, while the nBp devices have high responsivity at zero bias. When biasing both types of devices for equal dark currents, the nBn structure exhibits a differential resistance significantly higher than the nBp, although the nBp device may be biased for arbitrarily low dark current at the expense of much lower dynamic resistance. Capacitance-voltage measurements allow determination of the electron concentration in the unintentionally-doped absorber material, and demonstrate the existence of an electron accumulation layer at the absorber/barrier interface in the nBn device. Numerical simulations of idealized nBn devices demonstrate that photocurrent collection is possible under conditions of minimal absorber region depletion, thereby strongly suppressing depletion region Shockley-Read-Hall generation. © 2010 Copyright SPIE - The International Society for Optical Engineering.

Abstract not provided.

Abstract not provided.