Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Uncertainty quantificatio in climate models is challenged by the sparsity of the available climate data due to the high computational cost of the model runs. Another feature that prevents classical uncertainty analyses from being easily applicable is the bifurcative behavior in the climate data with respect to certain parameters. A typical example is the Meridional Overturning Circulation in the Atlantic Ocean. The maximum overturning stream function exhibits discontinuity across a curve in the space of two uncertain parameters, namely climate sensitivity and CO{sub 2} forcing. We develop a methodology that performs uncertainty quantificatio in the presence of limited data that have discontinuous character. Our approach is two-fold. First we detect the discontinuity location with a Bayesian inference, thus obtaining a probabilistic representation of the discontinuity curve location in presence of arbitrarily distributed input parameter values. Furthermore, we developed a spectral approach that relies on Polynomial Chaos (PC) expansions on each sides of the discontinuity curve leading to an averaged-PC representation of the forward model that allows efficient uncertainty quantification and propagation. The methodology is tested on synthetic examples of discontinuous data with adjustable sharpness and structure.

Abstract not provided.

Recent advances in high frame rate complementary metal-oxide-semiconductor (CMOS) cameras coupled with high repetition rate lasers have enabled laser-based imaging measurements of the temporal evolution of turbulent reacting flows. This measurement capability provides new opportunities for understanding the dynamics of turbulence-chemistry interactions, which is necessary for developing predictive simulations of turbulent combustion. However, quantitative imaging measurements using high frame rate CMOS cameras require careful characterization of the their noise, non-linear response, and variations in this response from pixel to pixel. We develop a noise model and calibration tools to mitigate these problems and to enable quantitative use of CMOS cameras. We have demonstrated proof of principle for image de-noising using both wavelet methods and Bayesian inference. The results offer new approaches for quantitative interpretation of imaging measurements from noisy data acquired with non-linear detectors. These approaches are potentially useful in many areas of scientific research that rely on quantitative imaging measurements.

Uncertainty quantification in climate models is challenged by the prohibitive cost of a large number of model evaluations for sampling. Another feature that often prevents classical uncertainty analysis from being readily applicable is the bifurcative behavior in the climate data with respect to certain parameters. A typical example is the Meridional Overturning Circulation in the Atlantic Ocean. The maximum overturning stream function exhibits a discontinuity across a curve in the space of two uncertain parameters, namely climate sensitivity and CO2 forcing. In order to propagate uncertainties from model parameters to model output we use polynomial chaos (PC) expansions to represent the maximum overturning stream function in terms of the uncertain climate sensitivity and CO2 forcing parameters. Since the spectral methodology assumes a certain degree of smoothness, the presence of discontinuities suggests that separate PC expansions on each side of the discontinuity will lead to more accurate descriptions of the climate model output compared to global PC expansions. We propose a methodology that first finds a probabilistic description of the discontinuity given a number of data points. Assuming the discontinuity curve is a polynomial, the algorithm is based on Bayesian inference of its coefficients. Markov chain Monte Carlo sampling is used to obtain joint distributions for the polynomial coefficients, effectively parameterizing the distribution over all possible discontinuity curves. Next, we apply the Rosenblatt transformation to the irregular parameter domains on each side of the discontinuity. This transformation maps a space of uncertain parameters with specific probability distributions to a space of i.i.d standard random variables where orthogonal projections can be used to obtain PC coefficients. In particular, we use uniform random variables that are compatible with PC expansions based on Legendre polynomials. The Rosenblatt transformation and the corresponding PC expansions for the model output on either side of the discontinuity are applied successively for several realizations of the discontinuity curve. The climate model output and its associated uncertainty at specific design points is then computed by taking a quadrature-based integration average over PC expansions corresponding to possible realizations of the discontinuity curve.

Conventional methods for uncertainty quantification are generally challenged in the 'tails' of probability distributions. This is specifically an issue for many climate observables since extensive sampling to obtain a reasonable accuracy in tail regions is especially costly in climate models. Moreover, the accuracy of spectral representations of uncertainty is weighted in favor of more probable ranges of the underlying basis variable, which, in conventional bases does not particularly target tail regions. Therefore, what is ideally desired is a methodology that requires only a limited number of full computational model evaluations while remaining accurate enough in the tail region. To develop such a methodology, we explore the use of surrogate models based on non-intrusive Polynomial Chaos expansions and Galerkin projection. We consider non-conventional and custom basis functions, orthogonal with respect to probability distributions that exhibit fat-tailed regions. We illustrate how the use of non-conventional basis functions, and surrogate model analysis, improves the accuracy of the spectral expansions in the tail regions. Finally, we also demonstrate these methodologies using precipitation data from CCSM simulations.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

The Polynomial chaos expansion provides a means of representing any L2 random variable as a sum of polynomials that are orthogonal with respect to a chosen measure. Examples include the Hermite polynomials with Gaussian measure on the real line and the Legendre polynomials with uniform measure on an interval. Polynomial chaos can be used to reformulate an uncertain ODE system, using Galerkin projection, as a new, higher-dimensional, deterministic ODE system which describes the evolution of each mode of the polynomial chaos expansion. It is of interest to explore the eigenstructure of the original and reformulated ODE systems by studying the eigenvalues and eigenvectors of their Jacobians. In this talk, we study the distribution of the eigenvalues of the two Jacobians. We outline in general the location of the eigenvalues of the new system with respect to those of the original system, and examine the effect of expansion order on this distribution.

Chemically reacting flow models generally involve inputs and parameters that are determined from empirical measurements, and therefore exhibit a certain degree of uncertainty. Estimating the propagation of this uncertainty into computational model output predictions is crucial for purposes of reacting flow model validation, model exploration, as well as design optimization. Recent years have seen great developments in probabilistic methods and tools for efficient uncertainty quantification (UQ) in computational models. These tools are grounded in the use of Polynomial Chaos (PC) expansions for representation of random variables. The utility and effectiveness of PC methods have been demonstrated in a range of physical models, including structural mechanics, transport in porous media, fluid dynamics, aeronautics, heat transfer, and chemically reacting flow. While high-dimensionality remains nominally an ongoing challenge, great strides have been made in dealing with moderate dimensionality along with non-linearity and oscillatory dynamics. In this talk, I will give an overview of UQ in chemical systems. I will cover both: (1) the estimation of uncertain input parameters from empirical data, and (2) the forward propagation of parametric uncertainty to model outputs. I will cover the basics of forward PC UQ methods with examples of their use. I will also highlight the need for accurate estimation of the joint probability density over the uncertain parameters, in order to arrive at meaningful estimates of model output uncertainties. Finally, I will discuss recent developments on the inference of this density given partial information from legacy experiments, in the absence of raw data.

Discontinuity detection is an important component in many fields: Image recognition, Digital signal processing, and Climate change research. Current methods shortcomings are: Restricted to one- or two-dimensional setting, Require uniformly spaced and/or dense input data, and Give deterministic answers without quantifying the uncertainty. Spectral methods for Uncertainty Quantification with global, smooth bases are challenged by discontinuities in model simulation results. Domain decomposition reduces the impact of nonlinearities and discontinuities. However, while gaining more smoothness in each subdomain, the current domain refinement methods require prohibitively many simulations. Therefore, detecting discontinuities up front and refining accordingly provides huge improvement to the current methodologies.

It is known that, in general, the correlation structure in the joint distribution of model parameters is critical to the uncertainty analysis of that model. Very often, however, studies in the literature only report nominal values for parameters inferred from data, along with confidence intervals for these parameters, but no details on the correlation or full joint distribution of these parameters. When neither posterior nor data are available, but only summary statistics such as nominal values and confidence intervals, a joint PDF must be chosen. Given the summary statistics it may not be reasonable nor necessary to assume the parameters are independent random variables. We demonstrate, using a Bayesian inference procedure, how to construct a posterior density for the parameters exhibiting self consistent correlations, in the absence of data, given (1) the fit-model, (2) nominal parameter values, (3) bounds on the parameters, and (4) a postulated statistical model, around the fit-model, for the missing data. Our approach ensures external Bayesian updating while marginalizing over possible data realizations. We then address the matching of given parameter bounds through the choice of hyperparameters, which are introduced in postulating the statistical model, but are not given nominal values. We discuss some possible approaches, including (1) inferring them in a separate Bayesian inference loop and (2) optimization. We also perform an empirical evaluation of the algorithm showing the posterior obtained with this data free inference compares well with the true posterior obtained from inference against the full data set.

It is known that, in general, the correlation structure in the joint distribution of model parameters is critical to the uncertainty analysis of that model. Very often, however, studies in the literature only report nominal values for parameters inferred from data, along with confidence intervals for these parameters, but no details on the correlation or full joint distribution of these parameters. When neither posterior nor data are available, but only summary statistics such as nominal values and confidence intervals, a joint PDF must be chosen. Given the summary statistics it may not be reasonable nor necessary to assume the parameters are independent random variables. We demonstrate, using a Bayesian inference procedure, how to construct a posterior density for the parameters exhibiting self consistent correlations, in the absence of data, given (1) the fit-model, (2) nominal parameter values, (3) bounds on the parameters, and (4) a postulated statistical model, around the fit-model, for the missing data. Our approach ensures external Bayesian updating while marginalizing over possible data realizations. We then address the matching of given parameter bounds through the choice of hyperparameters, which are introduced in postulating the statistical model, but are not given nominal values. We discuss some possible approaches, including (1) inferring them in a separate Bayesian inference loop and (2) optimization. We also perform an empirical evaluation of the algorithm showing the posterior obtained with this data free inference compares well with the true posterior obtained from inference against the full data set.

Chemically reacting flow models generally involve inputs and parameters that are determined from empirical measurements, and therefore exhibit a certain degree of uncertainty. Estimating the propagation of this uncertainty into computational model output predictions is crucial for purposes of reacting flow model validation, model exploration, as well as design optimization. Recent years have seen great developments in probabilistic methods and tools for efficient uncertainty quantification (UQ) in computational models. These tools are grounded in the use of Polynomial Chaos (PC) expansions for representation of random variables. The utility and effectiveness of PC methods have been demonstrated in a range of physical models, including structural mechanics, transport in porous media, fluid dynamics, aeronautics, heat transfer, and chemically reacting flow. While high-dimensionality remains nominally an ongoing challenge, great strides have been made in dealing with moderate dimensionality along with non-linearity and oscillatory dynamics. In this talk, I will give an overview of UQ in chemical systems. I will cover both: (1) the estimation of uncertain input parameters from empirical data, and (2) the forward propagation of parametric uncertainty to model outputs. I will cover the basics of forward PC UQ methods with examples of their use. I will also highlight the need for accurate estimation of the joint probability density over the uncertain parameters, in order to arrive at meaningful estimates of model output uncertainties. Finally, I will discuss recent developments on the inference of this density given partial information from legacy experiments, in the absence of raw data.

Multiscale multiphysics problems arise in a host of application areas of significant relevance to DOE, including electrical storage systems (membranes and electrodes in fuel cells, batteries, and ultracapacitors), water surety, chemical analysis and detection systems, and surface catalysis. Multiscale methods aim to provide detailed physical insight into these complex systems by incorporating coupled effects of relevant phenomena on all scales. However, many sources of uncertainty and modeling inaccuracies hamper the predictive fidelity of multiscale multiphysics simulations. These include parametric and model uncertainties in the models on all scales, and errors associated with coupling, or information transfer, across scales/physics. This presentation introduces our work on the development of uncertainty quantification methods for spatially decomposed atomistic-to-continuum (A2C) multiscale simulations. The key thrusts of this research effort are: inference of uncertain parameters or observables from experimental or simulation data; propagation of uncertainty through particle models; propagation of uncertainty through continuum models; propagation of information and uncertainty across model/scale interfaces; and numerical and computational analysis and control. To enable the bidirectional coupling between the atomistic and continuum simulations, a general formulation has been developed for the characterization of sampling noise due to intrinsic variability in particle simulations, and for the propagation of both this sampling noise and parametric uncertainties through coupled A2C multiscale simulations. Simplified tests of noise quantification in particle computations are conducted through Bayesian inference of diffusion rates in an idealized isothermal binary material system. A proof of concept is finally presented based on application of the present formulation to the propagation of uncertainties in a model plane Couette flow, where the near wall region is handled with molecular dynamics while the bulk region is handled with continuum methods.

Abstract not provided.

Abstract not provided.

Uncertainty quantification in climate models is challenged by the sparsity of the available climate data due to the high computational cost of the model runs. Another feature that prevents classical uncertainty analyses from being easily applicable is the bifurcative behavior in the climate data with respect to certain parameters. A typical example is the Meridional Overturning Circulation in the Atlantic Ocean. The maximum overturning stream function exhibits discontinuity across a curve in the space of two uncertain parameters, namely climate sensitivity and CO2 forcing. We develop a methodology that performs uncertainty quantification in this context in the presence of limited data.