Publications

Wright, Steven A.; Vernon, Milton E.; Fleming, Darryn F.; Rochau, Gary E.

Abstract not provided.

Nuclear Technology

Vernon, Milton E.; Parma, Edward J.; Rochau, Gary E.

Abstract not provided.

Wright, Steven A.; Conboy, Thomas M.; Rochau, Gary E.

This Sandia supported research project evaluated the potential improvement that 'condensing' supercritical carbon dioxide (S-CO{sub 2}) power cycles can have on the efficiency of Light Water Reactors (LWR). The analytical portion of research project identified that a S-CO{sub 2} 'condensing' re-compression power cycle with multiple stages of reheat can increase LWR power conversion efficiency from 33-34% to 37-39%. The experimental portion of the project used Sandia's S-CO{sub 2} research loop to show that the as designed radial compressor could 'pump' liquid CO{sub 2} and that the gas-cooler's could 'condense' CO{sub 2} even though both of these S-CO{sub 2} components were designed to operate on vapor phase S-CO{sub 2} near the critical point. There is potentially very high value to this research as it opens the possibility of increasing LWR power cycle efficiency, above the 33-34% range, while lowering the capital cost of the power plant because of the small size of the S-CO{sub 2} power system. In addition it provides a way to incrementally build advanced LWRs that are optimally designed to couple to S-CO{sub 2} power conversion systems to increase the power cycle efficiency to near 40%.

2nd International Topical Meeting on Safety and Technology of Nuclear Hydrogen Production, Control, and Management 2010

Moore, Robert; Vernon, Milton E.; Parma, Edward J.; Pickard, Paul; Rochau, Gary E.

In this work, we describe a novel design for a H2SO 4decomposer. The decomposition of H2SO4 to produce SO2is a common processing operation in the sulfur-based thermochemical cycles for hydrogen production where acid decomposition takes place at 850°C in the presence of a catalyst. The combination of high temperature and sulfuric acid creates a very corrosive environment that presents significant design challenges. The new decomposer design is based on a bayonet-type heat exchanger tube with the annular space packed with a catalyst. The unit is constructed of silicon carbide and other highly corrosion resistant materials. The new design integrates acid boiling, superheating, decomposition and heat recuperation into a single process and eliminates problems of corrosion and failure of high temperature seals encountered in previous testing using metallic construction materials. The unit was tested by varying the acid feed rate and decomposition temperature and pressure.

Rochau, Gary E.; Rodriguez, Salvador B.

A new high-fidelity integrated system method and analysis approach was developed and implemented for consistent and comprehensive evaluations of advanced fuel cycles leading to minimized Transuranic (TRU) inventories. The method has been implemented in a developed code system integrating capabilities of Monte Carlo N - Particle Extended (MCNPX) for high-fidelity fuel cycle component simulations. In this report, a Nuclear Energy System (NES) configuration was developed to take advantage of used fuel recycling and transmutation capabilities in waste management scenarios leading to minimized TRU waste inventories, long-term activities, and radiotoxicities. The reactor systems and fuel cycle components that make up the NES were selected for their ability to perform in tandem to produce clean, safe, and dependable energy in an environmentally conscious manner. The diversity in performance and spectral characteristics were used to enhance TRU waste elimination while efficiently utilizing uranium resources and providing an abundant energy source. A computational modeling approach was developed for integrating the individual models of the NES. A general approach was utilized allowing for the Integrated System Model (ISM) to be modified in order to provide simulation for other systems with similar attributes. By utilizing this approach, the ISM is capable of performing system evaluations under many different design parameter options. Additionally, the predictive capabilities of the ISM and its computational time efficiency allow for system sensitivity/uncertainty analysis and the implementation of optimization techniques.

Radel, Ross R.; Vernon, Milton E.; Rochau, Gary E.; Pickard, Paul S.

Sandia National Laboratories is investigating advanced Brayton cycles using supercritical working fluids for use with solar, nuclear or fossil heat sources. The focus of this work has been on the supercritical CO{sub 2} cycle (S-CO2) which has the potential for high efficiency in the temperature range of interest for these heat sources, and is also very compact, with the potential for lower capital costs. The first step in the development of these advanced cycles was the construction of a small scale Brayton cycle loop, funded by the Laboratory Directed Research & Development program, to study the key issue of compression near the critical point of CO{sub 2}. This document outlines the design of the small scale loop, describes the major components, presents models of system performance, including losses, leakage, windage, compressor performance, and flow map predictions, and finally describes the experimental results that have been generated.

Radel, Ross R.; Conboy, Thomas M.; Rochau, Gary E.

Abstract not provided.

Rochau, Gary E.

Abstract not provided.

Rochau, Gary E.

Abstract not provided.

Cleary, Virginia D.; Rochau, Gary E.; Radel, Ross R.

Abstract not provided.

Rochau, Gary E.; Rodriguez, Salvador B.

The impact associated with energy generation and utilization is immeasurable due to the immense, widespread, and myriad effects it has on the world and its inhabitants. The polar extremes are demonstrated on the one hand, by the high quality of life enjoyed by individuals with access to abundant reliable energy sources, and on the other hand by the global-scale environmental degradation attributed to the affects of energy production and use. Thus, nations strive to increase their energy generation, but are faced with the challenge of doing so with a minimal impact on the environment and in a manner that is self-reliant. Consequently, a revival of interest in nuclear energy has followed, with much focus placed on technologies for transmuting nuclear spent fuel. The performed research investigates nuclear energy systems that optimize the destruction of nuclear waste. In the context of this effort, nuclear energy system is defined as a configuration of nuclear reactors and corresponding fuel cycle components. The proposed system has unique characteristics that set it apart from other systems. Most notably the dedicated High-Energy External Source Transmuter (HEST), which is envisioned as an advanced incinerator used in combination with thermal reactors. The system is configured for examining environmentally benign fuel cycle options by focusing on minimization or elimination of high level waste inventories. Detailed high-fidelity exact-geometry models were developed for representative reactor configurations. They were used in preliminary calculations with Monte Carlo N-Particle eXtented (MCNPX) and Standardized Computer Analysis for Licensing Evaluation (SCALE) code systems. The reactor models have been benchmarked against existing experimental data and design data. Simulink{reg_sign}, an extension of MATLAB{reg_sign}, is envisioned as the interface environment for constructing the nuclear energy system model by linking the individual reactor and fuel component sub-models for overall analysis of the system. It also provides control over key user input parameters and the ability to effectively consolidate vital output results for uncertainty/sensitivity analysis and optimization procedures. The preliminary analysis has shown promising advanced fuel cycle scenarios that include Pressure Water Reactors Pressurized Water Reactors (PWRs), Very High Temperature Reactors (VHTRs) and dedicated HEST waste incineration facilities. If deployed, these scenarios may substantially reduce nuclear waste inventories approaching environmentally benign nuclear energy system characteristics. Additionally, a spent fuel database of the isotopic compositions for multiple design and control parameters has been created for the VHTR-HEST input fuel streams. Computational approaches, analysis metrics, and benchmark strategies have been established for future detailed studies.

Transactions of the American Nuclear Society

Rochau, Gary E.; Cleary, Virginia D.

Abstract not provided.

Transactions of the American Nuclear Society

Cleary, Virginia D.; Rochau, Gary E.

Abstract not provided.

Cleary, Virginia D.; Rochau, Gary E.

Abstract not provided.

Cleary, Virginia D.; Rochau, Gary E.

Abstract not provided.

Fusion Engineering and Design

Mehlhorn, Thomas A.; Cipiti, Benjamin B.; Olson, C.L.; Rochau, Gary E.

Energy demand and GDP per capita are strongly correlated, while public concern over the role of energy in climate change is growing. Nuclear power plants produce 16% of world electricity demands without greenhouse gases. Generation-IV advanced nuclear energy systems are being designed to be safe and economical. Minimizing the handling and storage of nuclear waste is important. NIF and ITER are bringing sustainable fusion energy closer, but a significant gap in fusion technology development remains. Fusion-fission hybrids could be a synergistic step to a pure fusion economy and act as a technology bridge. We discuss how a pulsed power-driven Z-pinch hybrid system producing only 20 MW of fusion yield can drive a sub-critical transuranic blanket that transmutes 1280 kg of actinide wastes per year and produces 3000 MW. These results are applicable to other inertial and magnetic fusion energy systems. A hybrid system could be introduced somewhat sooner because of the modest fusion yield requirements and can provide both a safe alternative to fast reactors for nuclear waste transmutation and a maturation path for fusion technology. The development and demonstration of advanced materials that withstand high-temperature, high-irradiation environments is a fundamental technology issue that is common to both fusion-fission hybrids and Generation-IV reactors. © 2008 Elsevier B.V. All rights reserved.

American Nuclear Society - International Topical Meeting on Probabilistic Safety Assessment and Analysis, PSA 2008

Radel, Ross R.; Rochau, Gary E.

This report evaluates transportation risk for nuclear material in the proposed Global Nuclear Energy Partnership (GNEP) fuel cycle. Since many details of the GNEP program are yet to be determined, this document is intended only to identify general issues. The existing regulatory environment is determined to be largely prepared to incorporate the changes that the GNEP program will introduce. Nuclear material vulnerability and attractiveness are considered with respect to the various transport stages within the GNEP fuel cycle. It is determined that increased transportation security will be required for the GNEP fuel cycle, particularly for international transport. Finally, transportation considerations for several fuel cycle scenarios are discussed. These scenarios compare the current "once-through" fuel cycle with various aspects of the proposed GNEP fuel cycle.

American Nuclear Society - International Topical Meeting on Probabilistic Safety Assessment and Analysis, PSA 2008

Cleary, Virginia D.; Rochau, Gary E.; Méndez, Carmen

The advent of the nuclear renaissance gives rise to a concern for the effective design of nuclear fuel cycle systems that are safe, secure, nonproliferating and cost-effective. We propose to integrate the monitoring of the four major factors of nuclear facilities by focusing on the interactions between Safeguards, Operations, Security, and Safety (SOSS). We proposed to develop a framework that monitors process information continuously and can demonstrate the ability to enhance safety, operations, security, and safeguards by measuring and reducing relevant SOSS risks, thus ensuring the safe and legitimate use of the nuclear fuel cycle facility. A real-time comparison between expected and observed operations provides the foundation for the calculation of SOSS risk. The automation of new nuclear facilities requiring minimal manual operation provides an opportunity to utilize the abundance of process information for monitoring SOSS risk. A framework that monitors process information continuously can lead to greater transparency of nuclear fuel cycle activities and can demonstrate the ability to enhance the safety, operations, security and safeguards associated with the functioning of the nuclear fuel cycle facility. Sandia National Laboratories (SNL) has developed a risk algorithm for safeguards and is in the process of demonstrating the ability to monitor operational signals in real-time though a cooperative research project with the Japan Atomic Energy Agency (JAEA). The risk algorithms for safety, operations and security are under development. The next stage of this work will be to integrate the four algorithms into a single framework.

Transactions of the American Nuclear Society

Cleary, Virginia D.; Méndez, Carmen; Rochau, Gary E.

Abstract not provided.

Rochau, Gary E.; Cleary, Virginia D.

Abstract not provided.

Cleary, Virginia D.; Rochau, Gary E.

The advent of the nuclear renaissance gives rise to a concern for the effective design of nuclear fuel cycle systems that are safe, secure, nonproliferating and cost-effective. We propose to integrate the monitoring of the four major factors of nuclear facilities by focusing on the interactions between Safeguards, Operations, Security, and Safety (SOSS). We proposed to develop a framework that monitors process information continuously and can demonstrate the ability to enhance safety, operations, security, and safeguards by measuring and reducing relevant SOSS risks, thus ensuring the safe and legitimate use of the nuclear fuel cycle facility. A real-time comparison between expected and observed operations provides the foundation for the calculation of SOSS risk. The automation of new nuclear facilities requiring minimal manual operation provides an opportunity to utilize the abundance of process information for monitoring SOSS risk. A framework that monitors process information continuously can lead to greater transparency of nuclear fuel cycle activities and can demonstrate the ability to enhance the safety, operations, security and safeguards associated with the functioning of the nuclear fuel cycle facility. Sandia National Laboratories (SNL) has developed a risk algorithm for safeguards and is in the process of demonstrating the ability to monitor operational signals in real-time though a cooperative research project with the Japan Atomic Energy Agency (JAEA). The risk algorithms for safety, operations and security are under development. The next stage of this work will be to integrate the four algorithms into a single framework.

Cleary, Virginia D.; Rochau, Gary E.

Abstract not provided.

Cleary, Virginia D.; Rochau, Gary E.

Abstract not provided.

Cleary, Virginia D.; Rochau, Gary E.

Abstract not provided.

Rochau, Gary E.

Abstract not provided.