Publications

Results 51–65 of 65
Skip to search filters

Development of a high-temperature diagnostics-while-drilling tool

Blankenship, Douglas A.; Chavira, David C.; Henfling, Joseph A.; King, Dennis K.; Knudsen, Steven D.; Polsky, Yarom P.

The envisioned benefits of Diagnostics-While-Drilling (DWD) are based on the principle that high-speed, real-time information from the downhole environment will promote better control of the drilling process. Although in practice a DWD system could provide information related to any aspect of exploration and production of subsurface resources, the current DWD system provides data on drilling dynamics. This particular set of new tools provided by DWD will allow quicker detection of problems, reduce drilling flat-time and facilitate more efficient drilling (drilling optimization) with the overarching result of decreased drilling costs. In addition to providing the driller with an improved, real-time picture of the drilling conditions downhole, data generated from DWD systems provides researchers with valuable, high fidelity data sets necessary for developing and validating enhanced understanding of the drilling process. Toward this end, the availability of DWD creates a synergy with other Sandia Geothermal programs, such as the hard-rock bit program, where the introduction of alternative rock-reduction technologies are contingent on the reduction or elimination of damaging dynamic effects. More detailed descriptions of the rationale for the program and early development efforts are described in more detail by others [SAND2003-2069 and SAND2000-0239]. A first-generation low-temperature (LT) DWD system was fielded in a series of proof-of-concept tests (POC) to validate functionality. Using the LT system, DWD was subsequently used to support a single-laboratory/multiple-partner CRADA (Cooperative Research and Development Agreement) entitled Advanced Drag Bits for Hard-Rock Drilling. The drag-bit CRADA was established between Sandia and four bit companies, and involved testing of a PDC bit from each company [Wise, et al., 2003, 2004] in the same lithologic interval at the Gas Technology Institute (GTI) test facility near Catoosa, OK. In addition, the LT DWD system has been fielded in cost-sharing efforts with an industrial partner to support the development of new generation hard-rock drag bits. Following the demonstrated success of the POC DWD system, efforts were initiated in FY05 to design, fabricate and test a high-temperature (HT) capable version of the DWD system. The design temperature for the HT DWD system was 225 C. Programmatic requirements dictated that a HT DWD tool be developed during FY05 and that a working system be demonstrated before the end of FY05. During initial design discussions regarding a high-temperature system it was decided that, to the extent possible, the HT DWD system would maintain functionality similar to the low temperature system, that is, the HT DWD system would also be designed to provide the driller with real-time information on bit and bottom-hole-assembly (BHA) dynamics while drilling. Additionally, because of time and fiscal constraints associated with the HT system development, the design of the HT DWD tool would follow that of the LT tool. The downhole electronics package would be contained in a concentrically located pressure barrel and the use of externally applied strain gages with thru-tool connectors would also be used in the new design. Also, in order to maximize the potential wells available for the HT DWD system and to allow better comparison with the low-temperature design, the diameter of the tool was maintained at 7-inches. This report discusses the efforts associated with the development of a DWD system capable of sustained operation at 225 C. This report documents work performed in the second phase of the Diagnostics-While-Drilling (DWD) project in which a high-temperature (HT) version of the phase 1 low-temperature (LT) proof-of-concept (POC) DWD tool was built and tested. Descriptions of the design, fabrication and field testing of the HT tool are provided. Background on prior phases of the project can be found in SAND2003-2069 and SAND2000-0239.

More Details
TYPE SAND Report YEAR 2009
OSTIDOI

Hard-rock field performance of drag bits and a downhole Diagnostics-While-Drilling (DWD) tool

Transactions - Geothermal Resources Council

Wise, Jack L.; Mansure, Arthur J.; Blankenship, Douglas A.

A series of field tests sponsored by Sandia National Laboratories has simultaneously demonstrated the hard-rock drilling performance of different industry-supplied drag bits as well as Sandia's new Diagnostics-While-Drilling (DWD) system, which features a novel downhole tool that monitors dynamic conditions in close proximity to the bit. Drilling with both conventional and advanced ("best effort") drag bits was conducted at the GTI Catoosa Test Facility (near Tulsa, OK) in a well-characterized lithologic column that features an extended hard-rock interval of Mississippi limestone above a layer of highly abrasive Misener sandstone and an underlying section of hard Arbuckle dolomite. Output from the DWD system was closely observed during drilling and was used to make real-time decisions for adjusting the drilling parameters. This paper summarizes penetration rate and damage results for the various drag bits, shows representative DWD display data, and illustrates the application of these data for optimizing drilling performance and avoiding trouble.

More Details
TYPE Conference YEAR 2005
ScopusOSTI
Results 51–65 of 65
Results 51–65 of 65