Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Dynamic control of thermal transport in solid-state systems is a transformative capability with the promise to propel technologies including phononic logic, thermal management, and energy harvesting. A solid-state solution to rapidly manipulate phonons has escaped the scientific community. We demonstrate active and reversible tuning of thermal conductivity by manipulating the nanoscale ferroelastic domain structure of a Pb(Zr0.3Ti0.7)O3 film with applied electric fields. With subsecond response times, the room-temperature thermal conductivity was modulated by 11%.

We present simulation results that show circularly polarized light persists through scattering environments better than linearly polarized light. Specifically, we show persistence is enhanced through many scattering events in an environment with a size parameter representative of advection fog at infrared wavelengths. Utilizing polarization tracking Monte Carlo simulations we show a larger persistence benefit for circular polarization versus linear polarization for both forward and backscattered photons. We show the evolution of the incident polarization states after various scattering events which highlight the mechanism leading to circular polarization's superior persistence.

We find for infrared wavelengths that there are broad ranges of particle sizes and refractive indices that represent fog and rain, where circular polarization can persist to longer ranges than linear polarization. Using polarization tracking Monte Carlo simulations for varying particle size, wavelength, and refractive index, we show that, for specific scene parameters, circular polarization outperforms linear polarization in maintaining the illuminating polarization state for large optical depths. This enhancement with circular polarization can be exploited to improve range and target detection in obscurant environments that are important in many critical sensing applications. Initially, researchers employed polarizationdiscriminating schemes, often using linearly polarized active illumination, to further distinguish target signals from the background noise. More recently, researchers have investigated circular polarization as a means to separate signal from noise even more. Specifically, we quantify both linearly and circularly polarized active illumination and show here that circular polarization persists better than linear for radiation fog in the short-wave infrared, for advection fog in the short-wave and long-wave infrared, and large particle sizes of Sahara dust around the 4 μmwavelength. Conversely, we quantify where linear polarization persists better than circular polarization for some limited particle sizes of radiation fog in the long-wave infrared, small particle sizes of Sahara dust for wavelengths of 9-10.5 μm, and large particle sizes of Sahara dust through the 8-11 μm wavelength range in the long-wave infrared.

Abstract not provided.

We find for infrared wavelengths there are broad ranges of particle sizes and refractive indices that represent fog and rain where the use of circular polarization can persist to longer ranges than linear polarization. Using polarization tracking Monte Carlo simulations for varying particle size, wavelength, and refractive index systematically, we show that for specific scene parameters circular polarization outperforms linear polarization in maintaining the intended polarization state for large optical depths. This enhancement in circular polarization can be exploited to improve range and target detection in obscurant environments that are important in many critical sensing applications. Specifically, circular polarization persists better than linear for radiation fog in the short-wave infrared, for advection fog in the short-wave infrared and the long-wave infrared, and large particle sizes of Sahara dust around the 4 micron wavelength.

Abstract not provided.

Abstract not provided.

We present both simulation and experimental results showing that circularly polarized light maintains its degree of polarization better than linearly polarized light in scattering environments. This is specifically true in turbid environments like fog and clouds. In contrast to previous studies that propagate single wavelengths through broad particle-size distributions, this work identifies regions where circular polarization persists further than linear by systematically surveying different wavelengths through monodisperse particle diameters. For monodisperse polystyrene microspheres in water, for particle diameters of 0.99 and 1.925 microns and varying optical depths, we show that circular polarization's ability to persist through multiple scattering events is enhanced by as much as a factor of four, when compared to that of linear polarization. These particle diameters correspond to size parameters found for infrared wavelengths and marine and continental fog particle distributions. The experimental results are compared to Monte Carlo simulations for all scattering environments investigated. © 2014 SPIE.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We explore the spectral and angular selectivity of near surface normal transmission of grating modified metallic surfaces and their ultimate potential for application as narrow-band spectro-polarimetric planar filter components in the development of advanced infrared focal plane arrays. The developed photonic microstructures exhibit tailored spectral transmission characteristics in the long wavelength infrared, and can be fabricated to preferentially transmit a given linear polarization within the design band. Modification of the material and structural properties of the diffractive optical element enables sub-pixel tuning of the spectro-polarimetric response of the device allowing for intelligent engineering of planar filter components for development of advanced focal plane arrays in the long wavelength infrared. The planar nature of the developed components leaves them immune to fabrication issues that typically plague thin film interference filters used for similar applications in the infrared, namely, deposition of multiple low-stress quarter-wavelength films and modification of the film thicknesses for each pixel. The solution developed here presents the opportunity for subpixel modification of the spectral response leading to an efficient, versatile filter component suitable for direct integration with commercially available focal plane array technologies via standard fabrication techniques. We will discuss the theoretical development and analysis of the described components and compare the results to the current state-of-the-art. © 2012 SPIE.

Abstract not provided.

Radiation hard nonvolatile random access memory (NVRAM) is a crucial component for DOE and DOD surveillance and defense applications. NVRAMs based upon ferroelectric materials (also known as FERAMs) are proven to work in radiation-rich environments and inherently require less power than many other NVRAM technologies. However, fabrication and integration challenges have led to state-of-the-art FERAMs still being fabricated using a 130nm process while competing phase-change memory (PRAM) has been demonstrated with a 20nm process. Use of block copolymer lithography is a promising approach to patterning at the sub-32nm scale, but is currently limited to self-assembly directly on Si or SiO{sub 2} layers. Successful integration of ferroelectrics with discrete and addressable features of {approx}15-20nm would represent a 100-fold improvement in areal memory density and would enable more highly integrated electronic devices required for systems advances. Towards this end, we have developed a technique that allows us to carry out block copolymer self-assembly directly on a huge variety of different materials and have investigated the fabrication, integration, and characterization of electroceramic materials - primarily focused on solution-derived ferroelectrics - with discrete features of {approx}20nm and below. Significant challenges remain before such techniques will be capable of fabricating fully integrated NVRAM devices, but the tools developed for this effort are already finding broader use. This report introduces the nanopatterned NVRAM device concept as a mechanism for motivating the subsequent studies, but the bulk of the document will focus on the platform and technology development.

Abstract not provided.

Abstract not provided.

LDRD Project 105876 was a research project whose primary goal was to discover the currently unknown science underlying the basic linear and nonlinear electrodynamic response of nanotubes and nanowires in a manner that will support future efforts aimed at converting forefront nanoscience into innovative new high-frequency nanodevices. The project involved experimental and theoretical efforts to discover and understand high frequency (MHz through tens of GHz) electrodynamic response properties of nanomaterials, emphasizing nanowires of silicon, zinc oxide, and carbon nanotubes. While there is much research on DC electrical properties of nanowires, electrodynamic characteristics still represent a major new frontier in nanotechnology. We generated world-leading insight into how the low dimensionality of these nanomaterials yields sometimes desirable and sometimes problematic high-frequency properties that are outside standard model electron dynamics. In the cases of silicon nanowires and carbon nanotubes, evidence of strong disorder or glass-like charge dynamics was measured, indicating that these materials still suffer from serious inhomogeneities that limit there high frequency performance. Zinc oxide nanowires were found to obey conventional Drude dynamics. In all cases, a significant practical problem involving large impedance mismatch between the high intrinsic impedance of all nanowires and nanotubes and high-frequency test equipment had to be overcome.

Abstract not provided.

Abstract not provided.