Publications

Ihlefeld, Jon I.; Scrymgeour, David S.; Michael, Joseph R.; McKenzie, Bonnie B.; Medlin, Douglas L.; Paisley, Elizabeth A.; Foley, Brian M.; Gaskins, John T.; Hopkins, Patrick E.; Wallace, Margeaux W.; Trolier-McKinstry, Susan T.

Abstract not provided.

Proceedings of SPIE - The International Society for Optical Engineering

Vander Laan, John D.; Wright, Jeremy B.; Scrymgeour, David S.; Kemme, S.A.

Scattering environment conditions, such as fog, pose a challenge for many detection and surveillance active sensing operations in both ground and air platforms. For example, current autonomous vehicles rely on a range of optical sensors that are affected by degraded visual environments. Real-world fog conditions can vary widely depending on the location and environmental conditions during its creation. In our previous work we have shown benefits for increasing signal and range through scattering environments such as fog utilizing polarized light, specifically circular polarization. In this work we investigate the effect of changing fog particle sizes and distributions on polarization persistence for both circularly and linearly polarized light via simulation. We present polarization tracking Monte Carlo results for a range of realistic monodisperse particle sizes as well as varying particle size distributions as a model of scattering environments. We systematically vary the monodisperse particle size, mean particle size of a distribution, particle size distribution width, and number of distribution lobes (bi-modal), as they affect polarized light transmission through a scattering environment. We show that circular polarization signal persists better than linear polarization signal for most variations of the particle distribution parameters.

Proceedings of SPIE - The International Society for Optical Engineering

Wright, Jeremy B.; Vander Laan, John D.; Sanchez, A.L.; Kemme, S.A.; Scrymgeour, David S.

Degraded visual environments are a serious concern for modern sensing and surveillance systems. Fog is of interest due to the frequency of its formation along our coastlines disrupting border security and surveillance. Fog presents hurdles in intelligence and reconnaissance by preventing data collection with optical systems for extended periods. We will present recent results from our work in operating optical systems in our controlled fog experimental chamber. This facility is a 180-foot-long, 10-foot-wide, and 10-foot-Tall structure that has over 60 spray nozzles to achieve uniform aerosol coverage with various particle size, distributions, and densities. We will discuss the physical formation of fog in nature and how our generated fog compares. In addition, we will discuss fog distributions and characterization techniques. We will investigate the biases of different methods and discuss the different techniques that are appropriate for realistic environments. Finally, we will compare the data obtained from our characterization studies against accepted models (e.g., MODTRAN) and validate the usage of this unique capability as a controlled experimental realization of natural fog formations. By proving the capability, we will enable the testing and validation of future fog penetrating optical systems and providing a platform for performing optical propagation experimentation in a known, stable, and controlled environment.

Bussmann, Ezra B.; Muller, Richard P.; Scrymgeour, David S.; Carroll, Malcolm; Koepke, Justin K.

Abstract not provided.

Journal of Materials Science

Ihlefeld, Jon I.; Michael, Joseph R.; McKenzie, Bonnie B.; Scrymgeour, David S.; Maria, Jon P.; Paisley, Elizabeth A.; Kitahara, Andrew R.

Ferroelastic domain walls provide opportunities for deterministically controlling mechanical, optical, electrical, and thermal energy. Domain wall characterization in micro- and nanoscale systems, where their spacing may be of the order of 100 nm or less is presently limited to only a few techniques, such as piezoresponse force microscopy and transmission electron microscopy. These respective techniques cannot, however, independently characterize domain polarization orientation and domain wall motion in technologically relevant capacitor structures or in a non-destructive manner, thus presenting a limitation of their utility. In this work, we show how backscatter scanning electron microscopy utilizing channeling contrast yield can image the ferroelastic domain structure of ferroelectric films with domain wall spacing as narrow as 10 nm. Combined with electron backscatter diffraction to identify grain orientations, this technique provides information on domain orientation and domain wall type that cannot be readily measured using conventional non-destructive methods. In addition to grain orientation identification, this technique enables dynamic domain structure changes to be observed in functioning capacitors utilizing electrodes that are transparent to the high-energy backscattered electrons. This non-destructive, high-resolution domain imaging technique is applicable to a wide variety of ferroelectric thin films and a multitude of material systems where nanometer-scale crystallographic twin characterization is required.

Ihlefeld, Jon I.; Michael, Joseph R.; Scrymgeour, David S.; McKenzie, Bonnie B.; Medlin, Douglas L.; Paisley, Elizabeth A.; Kitahara, Andrew R.; Maria, Jon-Paul M.

Abstract not provided.

Applied Optics

Vander Laan, John D.; Wright, Jeremy B.; Scrymgeour, David S.; Kemme, S.A.; Dereniak, Eustace L.

We present simulation and experimental results showing circular polarization is more tolerant of optical collection geometry (field of view and collection area) variations than linear polarization for forward-scattering environments. Circular polarization also persists superiorly in the forward-scattering environment compared to linear polarization by maintaining its degree of polarization better through increasing optical thicknesses. In contrast, both linear and circular polarizations are susceptible to collection geometry variations for isotropic-scattering (Rayleigh regime) environments, and linear polarization maintains a small advantage in polarization persistence. Simulations and measurements are presented for laboratory-based environments of polystyrene microspheres in water. Particle diameters were 0.0824 μm (for isotropic-scattering) and 1.925 μm (for forward-scattering) with an illumination wavelength of 543.5 nm.

Vander Laan, John D.; Wright, Jeremy B.; Kemme, S.A.; Sanchez, A.L.; Scrymgeour, David S.

Abstract not provided.

Applied Physics Letters

Kaehr, Bryan J.; Scrymgeour, David S.

The ability to create optical materials with arbitrary index distributions would prove transformative for optics design and applications. However, current fabrication techniques for graded index (GRIN) materials rely on diffusion profiles and therefore are unable to realize arbitrary distribution GRIN design. Here, we demonstrate the laser direct writing of graded index structures in protein-based hydrogels using multiphoton lithography. We show index changes spanning a range of 10-2, which is comparable with laser densified glass and polymer systems. Further, we demonstrate the conversion of these written density variation structures into SiO2, opening up the possibility of transforming GRIN hydrogels to a wide range of material systems.

Misra, Shashank M.; Scrymgeour, David S.

Abstract not provided.

Koepke, Justin K.; Scrymgeour, David S.; Simonson, Robert J.; Marshall, Michael T.; Ward, Daniel R.; Muller, Richard P.; Schultz, Peter A.; Baczewski, Andrew D.; Carroll, Malcolm; Misra, Shashank M.; Bussmann, Ezra B.

Abstract not provided.

Medina, Julian M.; Wright, Jeremy B.; Vander Laan, John D.; Scrymgeour, David S.

Abstract not provided.

Ward, Daniel R.; Misra, Shashank M.; Scrymgeour, David S.; Simonson, Robert J.; Marshall, Michael T.; Koepke, Justin K.; Bussmann, Ezra B.; Carroll, Malcolm; Ballard, Josh B.; Owen, James H.G.; Schmucker, Scott S.; Fuchs, Udi F.; Pryadkin, Swegiy P.; Randall, John R.

Abstract not provided.

Vander Laan, John D.; Wright, Jeremy B.; Scrymgeour, David S.; Kemme, S.A.; Dereniak, Eustace L.

Abstract not provided.

Scrymgeour, David S.; Simonson, Robert J.; Marshall, Michael T.; Misra, Shashank M.; Ward, Daniel R.; Carr, Stephen M.; Bielejec, Edward S.; Bussmann, Ezra B.; Carroll, Malcolm

Abstract not provided.

Scrymgeour, David S.; Ihlefeld, Jon I.; Michael, Joseph R.; McKenzie, Bonnie B.; Paisley, Elizabeth A.

Abstract not provided.

Maunz, Peter L.; Blume-Kohout, Robin J.; Blain, Matthew G.; Benito, Francisco B.; Berry, Christopher W.; Clark, Craig R.; Clark, Susan M.; Colombo, Anthony P.; Dagel, Amber L.; Fortier, Kevin M.; Haltli, Raymond A.; Heller, Edwin J.; Lobser, Daniel L.; Mizrahi, Jonathan M.; Nielsen, Erik N.; Resnick, Paul J.; Rembetski, John F.; Rudinger, Kenneth M.; Scrymgeour, David S.; Sterk, Jonathan D.; Tabakov, Boyan T.; Tigges, Chris P.; Van Der Wall, Jay W.; Stick, Daniel L.

Abstract not provided.

Proceedings of SPIE - The International Society for Optical Engineering

Vander Laan, John D.; Wright, Jeremy B.; Scrymgeour, David S.; Kemme, S.A.; Dereniak, Eustace L.

We present experimental and simulation results for a laboratory-based forward-scattering environment, where 1 μm diameter polystyrene spheres are suspended in water to model the optical scattering properties of fog. Circular polarization maintains its degree of polarization better than linear polarization as the optical thickness of the scattering environment increases. Both simulation and experiment quantify circular polarization's superior persistence, compared to that of linear polarization, and show that it is much less affected by variations in the field of view and collection area of the optical system. Our experimental environment's lateral extent was physically finite, causing a significant difference between measured and simulated degree of polarization values for incident linearly polarized light, but not for circularly polarized light. Through simulation we demonstrate that circular polarization is less susceptible to the finite environmental extent as well as the collection optic's limiting configuration.

Optics Express

Vander Laan, John D.; Wright, Jeremy B.; Scrymgeour, David S.; Kemme, S.A.; Dereniak, Eustace L.

This work quantifies the polarization persistence and memory of circularly polarized light in forward-scattering and isotropic (Rayleigh regime) environments; and for the first time, details the evolution of both circularly and linearly polarized states through scattering environments. Circularly polarized light persists through a larger number of scattering events longer than linearly polarized light for all forward-scattering environments; but not for scattering in the Rayleigh regime. Circular polarization's increased persistence occurs for both forward and backscattered light. The simulated environments model polystyrene microspheres in water with particle diameters of 0.1 μm, 2.0 μm, and 3.0 μm. The evolution of the polarization states as they scatter throughout the various environments are illustrated on the Poincaré sphere after one, two, and ten scattering events.

Ihlefeld, Jon I.; Scrymgeour, David S.; Paisley, Elizabeth A.; Medlin, Douglas L.; McKenzie, Bonnie B.; Michael, Joseph R.; Johnson, Raegan L.; Foley, Brian M.; Wallace, Margeaux W.; Trolier-McKinstry, Susan T.; Hopkins, Patrick E.

Abstract not provided.

Ihlefeld, Jon I.; Scrymgeour, David S.; Michael, Joseph R.; McKenzie, Bonnie B.; Medlin, Douglas L.; Blea-Kirby, Mia A.; Foley, Brian M.; Hopkins, Patrick E.; Wallace, Margeaux W.; Trolier-McKinstry, Susan T.

Abstract not provided.

Ihlefeld, Jon I.; Foley, Brian M.; Medlin, Douglas L.; McKenzie, Bonnie B.; Michael, Joseph R.; Scrymgeour, David S.; Wallace, Margeaux W.; Trolier-McKinstry, Susan T.; Hopkins, Patrick E.

Abstract not provided.

Maunz, Peter L.; Hollowell, Andrew E.; Lobser, Daniel L.; Nordquist, Christopher N.; Benito, Francisco M.; Clark, Craig R.; Clark, Susan M.; Colombo, Anthony P.; Fortier, Kevin M.; Haltli, Raymond A.; Heller, Edwin J.; Resnick, Paul J.; Rembetski, John F.; Sterk, Jonathan D.; Stick, Daniel L.; Tabakov, Boyan T.; Tigges, Chris P.; Van Der Wall, Jay W.; Dagel, Amber L.; Blain, Matthew G.; Scrymgeour, David S.

Abstract not provided.

Scrymgeour, David S.; Boye, Robert B.; Adelsberger, Kathleen A.

Image processing offers a potential to simplify an optical system by shifting some of the imaging burden from lenses to the more cost effective electronics. Wavefront coding using a cubic phase plate combined with image processing can extend the system's depth of focus, reducing many of the focus-related aberrations as well as material related chromatic aberrations. However, the optimal design process and physical limitations of wavefront coding systems with respect to first-order optical parameters and noise are not well documented. We examined image quality of simulated and experimental wavefront coded images before and after reconstruction in the presence of noise. Challenges in the implementation of cubic phase in an optical system are discussed. In particular, we found that limitations must be placed on system noise, aperture, field of view and bandwidth to develop a robust wavefront coded system.

Maunz, Peter L.; Benito, Francisco M.; Berry, Christopher W.; Blain, Matthew G.; Haltli, Raymond A.; Clark, Craig R.; Clark, Susan M.; Heller, Edwin J.; Hollowell, Andrew E.; Mizrahi, Jonathan M.; Nordquist, Christopher N.; Resnick, Paul J.; Rembetski, John F.; Scrymgeour, David S.; Sterk, Jonathan D.; Tabakov, Boyan T.; Tigges, Chris P.; Van Der Wall, Jay W.; Dagel, Amber L.

Abstract not provided.