Publications

Abstract not provided.

Scattering environment conditions, such as fog, pose a challenge for many detection and surveillance active sensing operations in both ground and air platforms. For example, current autonomous vehicles rely on a range of optical sensors that are affected by degraded visual environments. Real-world fog conditions can vary widely depending on the location and environmental conditions during its creation. In our previous work we have shown benefits for increasing signal and range through scattering environments such as fog utilizing polarized light, specifically circular polarization. In this work we investigate the effect of changing fog particle sizes and distributions on polarization persistence for both circularly and linearly polarized light via simulation. We present polarization tracking Monte Carlo results for a range of realistic monodisperse particle sizes as well as varying particle size distributions as a model of scattering environments. We systematically vary the monodisperse particle size, mean particle size of a distribution, particle size distribution width, and number of distribution lobes (bi-modal), as they affect polarized light transmission through a scattering environment. We show that circular polarization signal persists better than linear polarization signal for most variations of the particle distribution parameters.

Degraded visual environments are a serious concern for modern sensing and surveillance systems. Fog is of interest due to the frequency of its formation along our coastlines disrupting border security and surveillance. Fog presents hurdles in intelligence and reconnaissance by preventing data collection with optical systems for extended periods. We will present recent results from our work in operating optical systems in our controlled fog experimental chamber. This facility is a 180-foot-long, 10-foot-wide, and 10-foot-Tall structure that has over 60 spray nozzles to achieve uniform aerosol coverage with various particle size, distributions, and densities. We will discuss the physical formation of fog in nature and how our generated fog compares. In addition, we will discuss fog distributions and characterization techniques. We will investigate the biases of different methods and discuss the different techniques that are appropriate for realistic environments. Finally, we will compare the data obtained from our characterization studies against accepted models (e.g., MODTRAN) and validate the usage of this unique capability as a controlled experimental realization of natural fog formations. By proving the capability, we will enable the testing and validation of future fog penetrating optical systems and providing a platform for performing optical propagation experimentation in a known, stable, and controlled environment.

Abstract not provided.

Ferroelastic domain walls provide opportunities for deterministically controlling mechanical, optical, electrical, and thermal energy. Domain wall characterization in micro- and nanoscale systems, where their spacing may be of the order of 100 nm or less is presently limited to only a few techniques, such as piezoresponse force microscopy and transmission electron microscopy. These respective techniques cannot, however, independently characterize domain polarization orientation and domain wall motion in technologically relevant capacitor structures or in a non-destructive manner, thus presenting a limitation of their utility. In this work, we show how backscatter scanning electron microscopy utilizing channeling contrast yield can image the ferroelastic domain structure of ferroelectric films with domain wall spacing as narrow as 10 nm. Combined with electron backscatter diffraction to identify grain orientations, this technique provides information on domain orientation and domain wall type that cannot be readily measured using conventional non-destructive methods. In addition to grain orientation identification, this technique enables dynamic domain structure changes to be observed in functioning capacitors utilizing electrodes that are transparent to the high-energy backscattered electrons. This non-destructive, high-resolution domain imaging technique is applicable to a wide variety of ferroelectric thin films and a multitude of material systems where nanometer-scale crystallographic twin characterization is required.

Abstract not provided.

We present simulation and experimental results showing circular polarization is more tolerant of optical collection geometry (field of view and collection area) variations than linear polarization for forward-scattering environments. Circular polarization also persists superiorly in the forward-scattering environment compared to linear polarization by maintaining its degree of polarization better through increasing optical thicknesses. In contrast, both linear and circular polarizations are susceptible to collection geometry variations for isotropic-scattering (Rayleigh regime) environments, and linear polarization maintains a small advantage in polarization persistence. Simulations and measurements are presented for laboratory-based environments of polystyrene microspheres in water. Particle diameters were 0.0824 μm (for isotropic-scattering) and 1.925 μm (for forward-scattering) with an illumination wavelength of 543.5 nm.

Abstract not provided.

The ability to create optical materials with arbitrary index distributions would prove transformative for optics design and applications. However, current fabrication techniques for graded index (GRIN) materials rely on diffusion profiles and therefore are unable to realize arbitrary distribution GRIN design. Here, we demonstrate the laser direct writing of graded index structures in protein-based hydrogels using multiphoton lithography. We show index changes spanning a range of 10-2, which is comparable with laser densified glass and polymer systems. Further, we demonstrate the conversion of these written density variation structures into SiO2, opening up the possibility of transforming GRIN hydrogels to a wide range of material systems.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We present experimental and simulation results for a laboratory-based forward-scattering environment, where 1 μm diameter polystyrene spheres are suspended in water to model the optical scattering properties of fog. Circular polarization maintains its degree of polarization better than linear polarization as the optical thickness of the scattering environment increases. Both simulation and experiment quantify circular polarization's superior persistence, compared to that of linear polarization, and show that it is much less affected by variations in the field of view and collection area of the optical system. Our experimental environment's lateral extent was physically finite, causing a significant difference between measured and simulated degree of polarization values for incident linearly polarized light, but not for circularly polarized light. Through simulation we demonstrate that circular polarization is less susceptible to the finite environmental extent as well as the collection optic's limiting configuration.

This work quantifies the polarization persistence and memory of circularly polarized light in forward-scattering and isotropic (Rayleigh regime) environments; and for the first time, details the evolution of both circularly and linearly polarized states through scattering environments. Circularly polarized light persists through a larger number of scattering events longer than linearly polarized light for all forward-scattering environments; but not for scattering in the Rayleigh regime. Circular polarization's increased persistence occurs for both forward and backscattered light. The simulated environments model polystyrene microspheres in water with particle diameters of 0.1 μm, 2.0 μm, and 3.0 μm. The evolution of the polarization states as they scatter throughout the various environments are illustrated on the Poincaré sphere after one, two, and ten scattering events.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Image processing offers a potential to simplify an optical system by shifting some of the imaging burden from lenses to the more cost effective electronics. Wavefront coding using a cubic phase plate combined with image processing can extend the system's depth of focus, reducing many of the focus-related aberrations as well as material related chromatic aberrations. However, the optimal design process and physical limitations of wavefront coding systems with respect to first-order optical parameters and noise are not well documented. We examined image quality of simulated and experimental wavefront coded images before and after reconstruction in the presence of noise. Challenges in the implementation of cubic phase in an optical system are discussed. In particular, we found that limitations must be placed on system noise, aperture, field of view and bandwidth to develop a robust wavefront coded system.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Dynamic control of thermal transport in solid-state systems is a transformative capability with the promise to propel technologies including phononic logic, thermal management, and energy harvesting. A solid-state solution to rapidly manipulate phonons has escaped the scientific community. We demonstrate active and reversible tuning of thermal conductivity by manipulating the nanoscale ferroelastic domain structure of a Pb(Zr0.3Ti0.7)O3 film with applied electric fields. With subsecond response times, the room-temperature thermal conductivity was modulated by 11%.

We present simulation results that show circularly polarized light persists through scattering environments better than linearly polarized light. Specifically, we show persistence is enhanced through many scattering events in an environment with a size parameter representative of advection fog at infrared wavelengths. Utilizing polarization tracking Monte Carlo simulations we show a larger persistence benefit for circular polarization versus linear polarization for both forward and backscattered photons. We show the evolution of the incident polarization states after various scattering events which highlight the mechanism leading to circular polarization's superior persistence.

We find for infrared wavelengths that there are broad ranges of particle sizes and refractive indices that represent fog and rain, where circular polarization can persist to longer ranges than linear polarization. Using polarization tracking Monte Carlo simulations for varying particle size, wavelength, and refractive index, we show that, for specific scene parameters, circular polarization outperforms linear polarization in maintaining the illuminating polarization state for large optical depths. This enhancement with circular polarization can be exploited to improve range and target detection in obscurant environments that are important in many critical sensing applications. Initially, researchers employed polarizationdiscriminating schemes, often using linearly polarized active illumination, to further distinguish target signals from the background noise. More recently, researchers have investigated circular polarization as a means to separate signal from noise even more. Specifically, we quantify both linearly and circularly polarized active illumination and show here that circular polarization persists better than linear for radiation fog in the short-wave infrared, for advection fog in the short-wave and long-wave infrared, and large particle sizes of Sahara dust around the 4 μmwavelength. Conversely, we quantify where linear polarization persists better than circular polarization for some limited particle sizes of radiation fog in the long-wave infrared, small particle sizes of Sahara dust for wavelengths of 9-10.5 μm, and large particle sizes of Sahara dust through the 8-11 μm wavelength range in the long-wave infrared.

Abstract not provided.

We find for infrared wavelengths there are broad ranges of particle sizes and refractive indices that represent fog and rain where the use of circular polarization can persist to longer ranges than linear polarization. Using polarization tracking Monte Carlo simulations for varying particle size, wavelength, and refractive index systematically, we show that for specific scene parameters circular polarization outperforms linear polarization in maintaining the intended polarization state for large optical depths. This enhancement in circular polarization can be exploited to improve range and target detection in obscurant environments that are important in many critical sensing applications. Specifically, circular polarization persists better than linear for radiation fog in the short-wave infrared, for advection fog in the short-wave infrared and the long-wave infrared, and large particle sizes of Sahara dust around the 4 micron wavelength.

Abstract not provided.

Abstract not provided.

We present both simulation and experimental results showing that circularly polarized light maintains its degree of polarization better than linearly polarized light in scattering environments. This is specifically true in turbid environments like fog and clouds. In contrast to previous studies that propagate single wavelengths through broad particle-size distributions, this work identifies regions where circular polarization persists further than linear by systematically surveying different wavelengths through monodisperse particle diameters. For monodisperse polystyrene microspheres in water, for particle diameters of 0.99 and 1.925 microns and varying optical depths, we show that circular polarization's ability to persist through multiple scattering events is enhanced by as much as a factor of four, when compared to that of linear polarization. These particle diameters correspond to size parameters found for infrared wavelengths and marine and continental fog particle distributions. The experimental results are compared to Monte Carlo simulations for all scattering environments investigated. © 2014 SPIE.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We explore the spectral and angular selectivity of near surface normal transmission of grating modified metallic surfaces and their ultimate potential for application as narrow-band spectro-polarimetric planar filter components in the development of advanced infrared focal plane arrays. The developed photonic microstructures exhibit tailored spectral transmission characteristics in the long wavelength infrared, and can be fabricated to preferentially transmit a given linear polarization within the design band. Modification of the material and structural properties of the diffractive optical element enables sub-pixel tuning of the spectro-polarimetric response of the device allowing for intelligent engineering of planar filter components for development of advanced focal plane arrays in the long wavelength infrared. The planar nature of the developed components leaves them immune to fabrication issues that typically plague thin film interference filters used for similar applications in the infrared, namely, deposition of multiple low-stress quarter-wavelength films and modification of the film thicknesses for each pixel. The solution developed here presents the opportunity for subpixel modification of the spectral response leading to an efficient, versatile filter component suitable for direct integration with commercially available focal plane array technologies via standard fabrication techniques. We will discuss the theoretical development and analysis of the described components and compare the results to the current state-of-the-art. © 2012 SPIE.

Abstract not provided.

Radiation hard nonvolatile random access memory (NVRAM) is a crucial component for DOE and DOD surveillance and defense applications. NVRAMs based upon ferroelectric materials (also known as FERAMs) are proven to work in radiation-rich environments and inherently require less power than many other NVRAM technologies. However, fabrication and integration challenges have led to state-of-the-art FERAMs still being fabricated using a 130nm process while competing phase-change memory (PRAM) has been demonstrated with a 20nm process. Use of block copolymer lithography is a promising approach to patterning at the sub-32nm scale, but is currently limited to self-assembly directly on Si or SiO{sub 2} layers. Successful integration of ferroelectrics with discrete and addressable features of {approx}15-20nm would represent a 100-fold improvement in areal memory density and would enable more highly integrated electronic devices required for systems advances. Towards this end, we have developed a technique that allows us to carry out block copolymer self-assembly directly on a huge variety of different materials and have investigated the fabrication, integration, and characterization of electroceramic materials - primarily focused on solution-derived ferroelectrics - with discrete features of {approx}20nm and below. Significant challenges remain before such techniques will be capable of fabricating fully integrated NVRAM devices, but the tools developed for this effort are already finding broader use. This report introduces the nanopatterned NVRAM device concept as a mechanism for motivating the subsequent studies, but the bulk of the document will focus on the platform and technology development.

Abstract not provided.

Abstract not provided.

LDRD Project 105876 was a research project whose primary goal was to discover the currently unknown science underlying the basic linear and nonlinear electrodynamic response of nanotubes and nanowires in a manner that will support future efforts aimed at converting forefront nanoscience into innovative new high-frequency nanodevices. The project involved experimental and theoretical efforts to discover and understand high frequency (MHz through tens of GHz) electrodynamic response properties of nanomaterials, emphasizing nanowires of silicon, zinc oxide, and carbon nanotubes. While there is much research on DC electrical properties of nanowires, electrodynamic characteristics still represent a major new frontier in nanotechnology. We generated world-leading insight into how the low dimensionality of these nanomaterials yields sometimes desirable and sometimes problematic high-frequency properties that are outside standard model electron dynamics. In the cases of silicon nanowires and carbon nanotubes, evidence of strong disorder or glass-like charge dynamics was measured, indicating that these materials still suffer from serious inhomogeneities that limit there high frequency performance. Zinc oxide nanowires were found to obey conventional Drude dynamics. In all cases, a significant practical problem involving large impedance mismatch between the high intrinsic impedance of all nanowires and nanotubes and high-frequency test equipment had to be overcome.

Abstract not provided.

Abstract not provided.