Publications

Results 51–100 of 108
Skip to search filters

Application of temporal moments and other signal processing algorithms to analysis of ultrasonic signals through melting wax

AIP Conference Proceedings

Lau, Sarah J.; Moore, David G.; Stair, Sarah L.; Nelson, C.L.

Ultrasonic analysis is being explored as a way to capture events during melting of highly dispersive wax. Typical events include temperature changes in the material, phase transition of the material, surface flows and reformations, and void filling as the material melts. Melt tests are performed with wax to evaluate the usefulness of different signal processing algorithms in capturing event data. Several algorithm paths are being pursued. The first looks at changes in the velocity of the signal through the material. This is only appropriate when the changes from one ultrasonic signal to the next can be represented by a linear relationship, which is not always the case. The second tracks changes in the frequency content of the signal. The third algorithm tracks changes in the temporal moments of a signal over a full test. This method does not require that the changes in the signal be represented by a linear relationship, but attaching changes in the temporal moments to physical events can be difficult. This paper describes the algorithm paths applied to experimental data from ultrasonic signals as wax melts and explores different ways to display the results.

More Details
TYPE Conference Poster YEAR 2016
ScopusOSTI

Application of temporal moments and other signal processing algorithms to analysis of ultrasonic signals through melting wax

AIP Conference Proceedings

Moore, David G.; Lau, Sarah J.; Nelson, C.L.; Stair, Sarah L.

Ultrasonic analysis is being explored as a way to capture events during melting of highly dispersive wax. Typical events include temperature changes in the material, phase transition of the material, surface flows and reformations, and void filling as the material melts. Melt tests are performed with wax to evaluate the usefulness of different signal processing algorithms in capturing event data. Several algorithm paths are being pursued. The first looks at changes in the velocity of the signal through the material. This is only appropriate when the changes from one ultrasonic signal to the next can be represented by a linear relationship, which is not always the case. The second tracks changes in the frequency content of the signal. The third algorithm tracks changes in the temporal moments of a signal over a full test. This method does not require that the changes in the signal be represented by a linear relationship, but attaching changes in the temporal moments to physical events can be difficult. This study describes the algorithm paths applied to experimental data from ultrasonic signals as wax melts and explores different ways to display the results.

More Details
TYPE Journal Article YEAR 2016
OSTIDOI

Wave speed propagation measurements on highly attenuative heated materials

Physics Procedia

Moore, David G.; Ober, Curtis C.; Rodacy, Philip J.; Nelson, C.L.

Ultrasonic wave propagation decreases as a material is heated. Two factors that can characterize material properties are changes in wave speed and energy loss from interactions within the media. Relatively small variations in velocity and attenuation can detect significant differences in microstructures. This paper discusses an overview of experimental techniques that document the changes within a highly attenuative material as it is either being heated or cooled from 25°C to 90°C. The experimental set-up utilizes ultrasonic probes in a through-transmission configuration. The waveforms are recorded and analyzed during thermal experiments. To complement the ultrasonic data, a Discontinuous-Galerkin Model (DGM) was also created which uses unstructured meshes and documents how waves travel in these anisotropic media. This numerical method solves particle motion travel using partial differential equations and outputs a wave trace per unit time. As a result, both experimental and analytical data are compared and presented.

More Details
TYPE Journal Article YEAR 2015
OSTIDOI

Wave speed propagation measurements on highly attenuative heated materials

Physics Procedia

Moore, David G.; Ober, Curtis C.; Rodacy, Philip J.; Nelson, C.L.

Ultrasonic wave propagation decreases as a material is heated. Two factors that can characterize material properties are changes in wave speed and energy loss from interactions within the media. Relatively small variations in velocity and attenuation can detect significant differences in microstructures. This paper discusses an overview of experimental techniques that document the changes within a highly attenuative material as it is either being heated or cooled from 25°C to 90°C. The experimental set-up utilizes ultrasonic probes in a through-transmission configuration. The waveforms are recorded and analyzed during thermal experiments. To complement the ultrasonic data, a Discontinuous-Galerkin Model (DGM) was also created which uses unstructured meshes and documents how waves travel in these anisotropic media. This numerical method solves particle motion travel using partial differential equations and outputs a wave trace per unit time. Both experimental and analytical data are compared and presented.

More Details
TYPE Conference Poster YEAR 2015
ScopusOSTIDOI

Validation of carbon-fiber laminate simulations with low velocity impact experiments

CAMX 2014 - Composites and Advanced Materials Expo: Combined Strength. Unsurpassed Innovation.

English, Shawn A.; Nelson, Stacy M.; Krafcik, Karen L.; Moore, David G.; Kernen, Burke L.; Briggs, Timothy B.

Presented is a model verification and validation effort using low velocity impact (LVI) of carbon fiber reinforced polymer laminate experiments. The flat cylindrical indenter impacts the laminate with enough energy to produce delamination, matrix cracks and fiber breaks. Included in the experimental efforts are ultrasonic scans of the damage for qualitative validation of the models. However, the primary metrics of validation will be the force time history measured through the instrumented indenter and initial and final velocities. The simulations, which are run on in-house software, will consist of all physics and material parameters of importance as determined by a sensitivity analysis conducted on the full LVI simulation. The orthotropic damage and failure constitutive model used for the lamina is described in detail and material properties are measured, estimated from micromechanics or optimized through calibration. For all simulations of interest, the mesh and material behavior is verified through extensive convergence studies. An ensemble of simulations incorporating model parameter uncertainties is used to predict a response distribution which is then compared to experimental output. The result is a quantifiable confidence in material characterization and model physics when simulating this phenomenon in structures of interest.

More Details
TYPE Conference Poster YEAR 2014
ScopusOSTI
Results 51–100 of 108
Results 51–100 of 108