Publications

Abstract not provided.

Charge trapping and slow (from 10 s to > 1000 s) detrapping in AlGaN/GaN high electron mobility transistors (HEMTs) designed for high breakdown voltages (> 1500 V) is studied through a combination of electrical, thermal, and optical methods to identify the impact of Al molefraction and passivation on trapping. Trapping due to 5-10 V drain bias stress in the on-state (V gs = 0) is found to have significantly slower recovery, compared with trapping in the off-state (V gs < V th, V ds = 0). Two different trapping components, i.e., TG1 (E a = 0.6 eV) and TG2 (with negligible temperature dependence), in AlGaN dominate under gate bias stress in the off-state. Al 0.15 Ga 0.85N shows much more vulnerability to trapping under gate stress in the absence of passivation than does AlGaN with a higher Al mole fraction. Under large drain bias, trapping is dominated by a much deeper trap TD. Detrapping under monochromatic light shows TD to have E a ≈ 1.65 eV. Carbon doping in the buffer is shown to introduce threshold voltage shifts, unlike any of the other traps. © 2012 IEEE.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Carrier generation characteristics in n-type substrate SiC MOS capacitors induced by sub-bandgap energy light are reported. The generation rate is high enough to create an inversion layer in ∼20 minutes with monochromatic light (front side illumination) of energy 2.1 eV (intensity ∼5×10 16 cm-2s-1) in 4H-SiC for electric fields smaller than 1 MV/cm. Generation and recovery results strongly indicate involvement of a metastable defect whose efficiency as a generation center increases under hole-rich and decreases under electron-rich conditions. The generation dependence on bias history and light energy shows the defect to have properties consistent with the metastable silicon vacancy / carbon vacancy-antisite complex (VSi/Vc-CSi). © (2012) Trans Tech Publications.

Abstract not provided.

We present the results of a three year LDRD project that has focused on overcoming major materials roadblocks to achieving AlGaN-based deep-UV laser diodes. We describe our growth approach to achieving AlGaN templates with greater than ten times reduction of threading dislocations which resulted in greater than seven times enhancement of AlGaN quantum well photoluminescence and 15 times increase in electroluminescence from LED test structures. We describe the application of deep-level optical spectroscopy to AlGaN epilayers to quantify deep level energies and densities and further correlate defect properties with AlGaN luminescence efficiency. We further review our development of p-type short period superlattice structures as an approach to mitigate the high acceptor activation energies in AlGaN alloys. Finally, we describe our laser diode fabrication process, highlighting the development of highly vertical and smooth etched laser facets, as well as characterization of resulting laser heterostructures.

Abstract not provided.

Carrier generation characteristics in n-type substrate silicon carbide (SiC) metal oxide semiconductor capacitors induced by sub-bandgap energy light are reported. The generation rate is high enough to create an inversion layer in approximately 20 min with monochromatic front side illumination of energy 2.1 eV in 4H-SiC for electric fields less than 1 MV/cm. Generation and recovery results strongly indicate involvement of a metastable defect whose efficiency as a generation center increases under hole-rich and decreases under electron-rich conditions. The generation dependence on bias history and light energy shows the defect to have properties consistent with the metastable silicon vacancy/carbon vacancy-antisite complex (VSi/Vc-C Si). © 2011 American Institute of Physics.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Although planar heterostructures dominate current solid-state lighting architectures (SSL), 1D nanowires have distinct and advantageous properties that may eventually enable higher efficiency, longer wavelength, and cheaper devices. However, in order to fully realize the potential of nanowire-based SSL, several challenges exist in the areas of controlled nanowire synthesis, nanowire device integration, and understanding and controlling the nanowire electrical, optical, and thermal properties. Here recent results are reported regarding the aligned growth of GaN and III-nitride core-shell nanowires, along with extensive results providing insights into the nanowire properties obtained using cutting-edge structural, electrical, thermal, and optical nanocharacterization techniques. A new top-down fabrication method for fabricating periodic arrays of GaN nanorods and subsequent nanorod LED fabrication is also presented.

Abstract not provided.

We present the results of a three year LDRD project that focused on understanding the impact of defects on the electrical, optical and thermal properties of GaN-based nanowires (NWs). We describe the development and application of a host of experimental techniques to quantify and understand the physics of defects and thermal transport in GaN NWs. We also present the development of analytical models and computational studies of thermal conductivity in GaN NWs. Finally, we present an atomistic model for GaN NW electrical breakdown supported with experimental evidence. GaN-based nanowires are attractive for applications requiring compact, high-current density devices such as ultraviolet laser arrays. Understanding GaN nanowire failure at high-current density is crucial to developing nanowire (NW) devices. Nanowire device failure is likely more complex than thin film due to the prominence of surface effects and enhanced interaction among point defects. Understanding the impact of surfaces and point defects on nanowire thermal and electrical transport is the first step toward rational control and mitigation of device failure mechanisms. However, investigating defects in GaN NWs is extremely challenging because conventional defect spectroscopy techniques are unsuitable for wide-bandgap nanostructures. To understand NW breakdown, the influence of pre-existing and emergent defects during high current stress on NW properties will be investigated. Acute sensitivity of NW thermal conductivity to point-defect density is expected due to the lack of threading dislocation (TD) gettering sites, and enhanced phonon-surface scattering further inhibits thermal transport. Excess defect creation during Joule heating could further degrade thermal conductivity, producing a viscous cycle culminating in catastrophic breakdown. To investigate these issues, a unique combination of electron microscopy, scanning luminescence and photoconductivity implemented at the nanoscale will be used in concert with sophisticated molecular-dynamics calculations of surface and defect-mediated NW thermal transport. This proposal seeks to elucidate long standing material science questions for GaN while addressing issues critical to realizing reliable GaN NW devices.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Nanowires based on the III nitride materials system have attracted attention as potential nanoscale building blocks in optoelectronics, sensing, and electronics. However, before such applications can be realized, several challenges exist in the areas of controlled and ordered nanowire synthesis, fabrication of advanced nanowire heterostructures, and understanding and controlling the nanowire electrical and optical properties. Here, recent work is presented involving the aligned growth of GaN and III-nitride core-shell nanowires, along with extensive results providing insights into the nanowire properties obtained using advanced electrical, optical and structural characterization techniques.

Abstract not provided.

Abstract not provided.

The proposed work seeks to demonstrate and understand new phenomena in novel, freestanding III-nitride core-shell nanowires, including 1D and 2D electron gas formation and properties, and to investigate the role of surfaces and heterointerfaces on the transport and optical properties of nanowires, using a combined experimental and theoretical approach. Obtaining an understanding of these phenomena will be a critical step that will allow development of novel, ultrafast and ultraefficient nanowire-based electronic and photonic devices.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We present the results of a three year LDRD project which has focused on the development of novel, compact, ultraviolet solid-state sources and fluorescence-based sensing platforms that apply such devices to the sensing of biological and nuclear materials. We describe our development of 270-280 nm AlGaN-based semiconductor UV LEDs with performance suitable for evaluation in biosensor platforms as well as our development efforts towards the realization of a 340 nm AlGaN-based laser diode technology. We further review our sensor development efforts, including evaluation of the efficacy of using modulated LED excitation and phase sensitive detection techniques for fluorescence detection of bio molecules and uranyl-containing compounds.