Publications

Results 1–25 of 30
Skip to search filters

Sandia National Laboratories FY20 Progress Report

Aguirre, Brandon A.; Martin, William J.

The Energetic Neutrons campaign led by Sandia National Laboratories (SNL) had a successful year testing electronic devices and printed circuit boards (PCBs) under 14 MeV neutron irradiation at OMEGA. During FY20 the Energetic Neutrons campaign increased the number and complexity of experiments, continued collaborations with external organizations, and generated knowledge that supports SNL’s National Security mission. In FY20 the Energetic Neutrons campaign was executed by an early career team led by a new PI. The SNL team members were trained to take over new responsibilities during the shot day to increase the number and complexity of experiments in the campaigns. Also, in FY20 for the first time the Energetic Neutrons campaign had a graduate student contributing with pre and post-irradiation characterizations at SNL of the semiconductor devices irradiated at OMEGA. In FY20 SNL collaborated with the Air Force Nuclear Weapons Center (AFNWC) and supported experiments related to radiation effects in semiconductor devices. SNL also gave the opportunity to ride along to Los Alamos National Laboratory and multiple scientists from MIT and LLE. SNL continued using the last two generations of the Neutron Effects Diagnostics (NEDs) to field active and passive experiments but also redesigned the latest generation of the NEDs to accommodate larger components and improve the vacuum sealing as shown in figure 1a. The redesigned NEDs allowed SNL to perform active tests of a high voltage (HV) PCB for the first time at OMEGA; where signals before, during and after the irradiation were recorded. The HV PCB installed in one of the SNL NEDs is shown in figure 1b where a 3D-printed nosecone was used to check for mechanical and electrical interference. Passive irradiations of multiple components were followed up with leakage current, gain measurements and radiation-induced defect characterization.

More Details
TYPE Other Report YEAR 2020
OSTIDOI

The Development of a High Sensitivity Neutron Displacement Damage Sensor

IEEE Transactions on Nuclear Science

Tonigan, Andrew M.; Parma, Edward J.; Martin, William J.

The capability to characterize the neutron energy spectrum and fluence received by a test object is crucial to understanding the damage effects observed in electronic components. For nuclear research reactors and high energy density physics facilities this can pose exceptional challenges, especially with low level neutron fluences. An ASTM test method for characterizing neutron environments utilizes the 2N2222A transistor as a 1-MeV equivalent neutron fluence sensor and is applicable for environments with 1 × 1012 - 1 × 1014 1 -MeV(Si)-Eqv.-n/cm2. In this work we seek to extend the range of this test method to lower fluence environments utilizing the 2N1486 transistor. The 2N1486 is shown to be an effective neutron displacement damage sensor as low as 1 × 1010 1-MeV(Si)-Eqv.-n/cm2.

More Details
TYPE Journal Article YEAR 2017
ScopusOSTIDOI

The role of Z-pinch fusion transmutation of waste in the nuclear fuel cycle

Cipiti, Benjamin B.; Martin, William J.; Mehlhorn, Thomas A.; Rochau, Gary E.; Guild-Bingham, Avery G.

The resurgence of interest in reprocessing in the United States with the Global Nuclear Energy Partnership has led to a renewed look at technologies for transmuting nuclear waste. Sandia National Laboratories has been investigating the use of a Z-Pinch fusion driver to burn actinide waste in a sub-critical reactor. The baseline design has been modified to solve some of the engineering issues that were identified in the first year of work, including neutron damage and fuel heating. An on-line control feature was added to the reactor to maintain a constant neutron multiplication with time. The transmutation modeling effort has been optimized to produce more accurate results. In addition, more attention was focused on the integration of this burner option within the fuel cycle including an investigation of overall costs. This report presents the updated reactor design, which is able to burn 1320 kg of actinides per year while producing 3,000 MWth.

More Details
TYPE SAND Report YEAR 2007
OSTIDOI

Development of design and simulation model and safety study of large-scale hydrogen production using nuclear power

Rodriguez, Salvador B.; Gauntt, Randall O.; Gelbard, Fred G.; Drennen, Thomas E.; Malczynski, Leonard A.; Martin, William J.

Before this LDRD research, no single tool could simulate a very high temperature reactor (VHTR) that is coupled to a secondary system and the sulfur iodine (SI) thermochemistry. Furthermore, the SI chemistry could only be modeled in steady state, typically via flow sheets. Additionally, the MELCOR nuclear reactor analysis code was suitable only for the modeling of light water reactors, not gas-cooled reactors. We extended MELCOR in order to address the above deficiencies. In particular, we developed three VHTR input models, added generalized, modular secondary system components, developed reactor point kinetics, included transient thermochemistry for the most important cycles [SI and the Westinghouse hybrid sulfur], and developed an interactive graphical user interface for full plant visualization. The new tool is called MELCOR-H2, and it allows users to maximize hydrogen and electrical production, as well as enhance overall plant safety. We conducted validation and verification studies on the key models, and showed that the MELCOR-H2 results typically compared to within less than 5% from experimental data, code-to-code comparisons, and/or analytical solutions.

More Details
TYPE SAND Report YEAR 2007
OSTIDOI
Results 1–25 of 30
Results 1–25 of 30