Publications

42 Results
Skip to search filters

Sierra/SolidMechanics 5.0 User's Guide

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional code for finite element analysis of solids and structures. It provides capabilities for explicit dynamic, implicit quasistatic and dynamic analyses. The explicit dynamics capabilities allow for the efficient and robust solution of models with extensive contact subjected to large, suddenly applied loads. For implicit problems, Sierra/SM uses a multi-level iterative solver, which enables it to effectively solve problems with large deformations, nonlinear material behavior, and contact. Sierra/SM has a versatile library of continuum and structural elements, and a large library of material models. The code is written for parallel computing environments enabling scalable solutions of extremely large problems for both implicit and explicit analyses. It is built on the SIERRA Framework, which facilitates coupling with other SIERRA mechanics codes. This document describes the functionality and input syntax for Sierra/SM.

More Details

Sierra/SolidMechanics 5.0 Capabilities in Development

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.0 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as peridynamics and the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and $\textit{J}$-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 5.0 User's Guide Addendum for Shock Capabilities

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

This is an addendum to the Sierra/SolidMechanics 5.0 User’s Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State’s International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 5.0 User’s Guide should be referenced for most general descriptions of code capability and use.

More Details

Sierra/SolidMechanics 5.0 Theory Manual

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 5.0 Example Problems Manual

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra / SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra / SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 5.0 Verification Tests Manual

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 5.0 Goodyear Specific

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional finite element analysis code for solids and structures subjected to extensive contact and large deformations, encompassing explicit and implicit dynamic as well as quasistatic loading regimes. This document supplements the primary Sierra/SM 5.0 User’s Guide, describing capabilities specific to Goodyear analysis use cases, including additional implicit solver options, material models, finite element formulations, and contact settings.

More Details

Sierra/SolidMechanics 4.58 User's Guide Addendum for Shock Capabilities

Merewether, Mark T.; Treweek, Benjamin T.; Wagman, Ellen B.; Beckwith, Frank B.; de Frias, Gabriel J.; Koester, Jacob K.; Thomas, Jesse D.; Plews, Julia A.; Belcourt, Kenneth N.; Manktelow, Kevin M.; Mosby, Matthew D.; Veilleux, Michael V.; Tupek, Michael R.; Miller, Scott T.; Shelton, Timothy S.; Porter, V.L.; Gampert, Scott G.

This is an addendum to the Sierra/SolidMechanics 4.58 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 4.58 User's Guide should be referenced for most general descriptions of code capability and use.

More Details

Sierra/SolidMechanics 4.58. Capabilities In Development

Merewether, Mark T.; Treweek, Benjamin T.; Wagman, Ellen B.; Beckwith, Frank B.; de Frias, Gabriel J.; Koester, Jacob K.; Thomas, Jesse D.; Plews, Julia A.; Belcourt, Kenneth N.; Manktelow, Kevin M.; Mosby, Matthew D.; Veilleux, Michael V.; Tupek, Michael R.; Miller, Scott T.; Shelton, Timothy S.; Porter, V.L.; Gampert, Scott G.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 4.58 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as peridynamics and the reproducing kernel particle method (RKPM), numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and /-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations

More Details

Sierra/SolidMechanics 4.56 User's Guide: Addendum for Shock Capabilities

Merewether, Mark T.; Plews, Julia A.; de Frias, Gabriel J.; Mosby, Matthew D.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Manktelow, Kevin M.; Beckwith, Frank B.; Belcourt, Kenneth N.; Miller, Scott T.; Treweek, Benjamin T.; Wagman, Ellen B.; Koester, Jacob K.

This is an addendum to the Sierra/SolidMechanics 4.56 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 4.56 User's Guide should be referenced for most general descriptions of code capability and use.

More Details

Sierra/SolidMechanics 4.56 Capabilities In Development

Merewether, Mark T.; Plews, Julia A.; de Frias, Gabriel J.; Mosby, Matthew D.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Manktelow, Kevin M.; Beckwith, Frank B.; Belcourt, Kenneth N.; Miller, Scott T.; Treweek, Benjamin T.; Wagman, Ellen B.; Koester, Jacob K.

This user's guide documents capabilities in Sierra/SolidMechanics which remain "in-development" and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 4.56 User's Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as peridynamics and the reproducing kernel particle method (RKPM), numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 4.56 Theory Manual

Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Koester, Jacob K.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse T.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 4.56 Goodyear User's Guide

Merewether, Mark T.; Plews, Julia A.; de Frias, Gabriel J.; Mosby, Matthew D.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Manktelow, Kevin M.; Beckwith, Frank B.; Belcourt, Kenneth N.; Miller, Scott T.; Treweek, Benjamin T.; Wagman, Ellen B.; Koester, Jacob K.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional finite element analysis code for solids and structures subjected to extensive contact and large deformations, encompassing explicit and implicit dynamic as well as quasistatic loading regimes. This document supplements the primary Sierra/SM 4.56 User’s Guide, describing capabilities specific to Goodyear analysis use cases, including additional implicit solver options, material models, finite element formulations, and contact settings.

More Details

Sierra/SolidMechanics 4.54 Example Problems Manual

Veilleux, Michael V.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 4.54 Theory Manual

Veilleux, Michael V.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 4.54 Goodyear Specific

Veilleux, Michael V.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional finite element analysis code for solids and structures subjected to extensive contact and large deformations, encompassing explicit and implicit dynamic as well as quasistatic loading regimes. This document supplements the primary Sierra/SM 4.54 User's Guide, describing capabilities specific to Goodyear analysis use cases, including additional implicit solver options, material models, finite element formulations, and contact settings.

More Details

Sierra/SolidMechanics 4.54 Verification Tests Manual

Veilleux, Michael V.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra/SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra/SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 4.54. Capabilities in Development

Veilleux, Michael V.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 4.54 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as peridynamics and the reproducing kernel particle method (RKPM), numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and /-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 4.54 User's Guide: Addendum for Shock Capabilities

Veilleux, Michael V.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.

This is an addendum to the Sierra/SolidMechanics 4.54 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 4.54 User's Guide should be referenced for most general descriptions of code capability and use.

More Details

Sierra/SolidMechanics 4.52 Capabilities in Development

Plews, Julia A.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Le, San L.; Manktelow, Kevin M.; Merewether, Mark T.; Mosby, Matthew D.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

This user's guide documents capabilities in Sierra/SolidMechanics which remain "in-development" and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 4.52 User's Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as peridynamics and the reproducing kernel particle method (RKPM), numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 4.52 User's Guide: Addendum for Shock Capabilities

Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Le, San L.; Manktelow, Kevin M.; Merewether, Mark T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

This is an addendum to the Sierra/SolidMechanics 4.52 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 4.52 User's Guide should be referenced for most general descriptions of code capability and use.

More Details

Library of Advanced Materials for Engineering (LAME) 4.50

Merewether, Mark T.; Crane, Nathan K.; Plews, Julia A.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.; Scherzinger, William M.; Lester, Brian T.

Accurate and efficient constitutive modeling remains a cornerstone issue for solid mechanics analysis. Over the years, the LAME advanced material model library has grown to address this challenge by implement- ing models capable of describing material systems spanning soft polymers to stiff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco)plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting imple- mentation. Therefore, to enhance confidence and enable the utilization of the LAME library in application, this effort seeks to document and verify the various models in the LAME library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verifi- cation tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

More Details

Sierra/SolidMechanics 4.50 Verification Tests Manual

Merewether, Mark T.; Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.; Clutz, Christopher J.R.; Manktelow, Kevin M.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra/SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra/SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 4.50 Theory Manual

Merewether, Mark T.; Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.; Manktelow, Kevin M.; Clutz, Christopher J.R.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra / SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/Solid Mechanics 4.48 User's Guide

Merewether, Mark T.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Gampert, Scott G.; Xavier, Patrick G.; Plews, Julia A.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional code for finite element analysis of solids and structures. It provides capabilities for explicit dynamic, implicit quasistatic and dynamic analyses. The explicit dynamics capabilities allow for the efficient and robust solution of models with extensive contact subjected to large, suddenly applied loads. For implicit problems, Sierra/SM uses a multi-level iterative solver, which enables it to effectively solve problems with large deformations, nonlinear material behavior, and contact. Sierra/SM has a versatile library of continuum and structural elements, and a large library of material models. The code is written for parallel computing environments enabling scalable solutions of extremely large problems for both implicit and explicit analyses. It is built on the SIERRA Framework, which facilitates coupling with other SIERRA mechanics codes. This document describes the functionality and input syntax for Sierra/SM.

More Details

Sierra/SolidMechanics 4.48 Verification Tests Manual

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

Presented in this document is a small portion of the tests that exist in the Sierra / SolidMechanics (Sierra / SM) verification test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra / SM Example Problems Manual. Note, many other verification tests exist in the Sierra / SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 4.46 Example Problems Manual

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 4.48 Capabilities in Development

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

This document is a user's guide for capabilities that are not considered mature but are available in Sierra/SolidMechanics (Sierra/SM) for early adopters. The determination of maturity of a capability is determined by many aspects: having regression and verification level testing, documentation of functionality and syntax, and usability are such considerations. Capabilities in this document are lacking in one or many of these aspects.

More Details

Library of Advanced Materials for Engineering (LAME) 4.48

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

Accurate and efficient constitutive modeling remains a cornerstone issues for solid mechanics analysis. Over the years, the LAME advanced material model library has grown to address this challenge by implement- ing models capable of describing material systems spanning soft polymers to stiff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco)plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting imple- mentation. Therefore, to enhance confidence and enable the utilization of the LAME library in application, this effort seeks to document and verify the various models in the LAME library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verifi- cation tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

More Details

Sierra/SolidMechanics 4.48 Goodyear Specific

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

This document covers Sierra/SolidMechanics capabilities specific to Goodyear use cases. Some information may be duplicated directly from the Sierra/SolidMechanics User's Guide but is reproduced here to provide context for Goodyear-specific options.

More Details

Sierra/SolidMechanics 4.48 User's Guide: Addendum for Shock Capabilities

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

This is an addendum to the Sierra/SolidMechanics 4.48 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export-control requirements. The ITAR enhancements to Sierra/SM in- clude material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. Since this is an addendum to the standard Sierra/SM user's guide, please refer to that document first for general descriptions of code capability and use.

More Details

Library of Advanced Materials for Engineering (LAME) 4.44

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel J.; Le, San L.; Littlewood, David J.; Merewether, Mark T.; Mosby, Matthew D.; Pierson, Kendall H.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Tupek, Michael R.; Veilleux, Michael V.; Xavier, Patrick G.

Accurate and efficient constitutive modeling remains a cornerstone issues for solid mechanics analysis. Over the years, the LAME advanced material model library has grown to address this challenge by implementing models capable of describing material systems spanning soft polymers to s ti ff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco) plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting implementation. Therefore, to enhance confidence and enable the utilization of the LAME library in application, this effort seeks to document and verify the various models in the LAME library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verification tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

More Details

Guide to Coupled Electrostatic-Structural Analyses with Arpeggio

Porter, V.L.

Many applications in micromechanical systems (MEMS) involve electrostatically actuated parts. Arpeggio is a code for facilitating loose coupling between computational mechanics modules in a parallel computing environment. This document describes how to use Arpeggio for coupled elecromechanical analyses using examples commonly encountered in MEMS applications, namely the response of structures to loads imposed by electrostatic fields. For this type of analysis, Arpeggio is used to couple Adagio, a three dimensional finite element code for nonlinear, quasi static or implicit dynamic analysis of three-dimensional structures, with BEM, a boundary integral method code for the analysis of electrostatic fields. This guide describes the methodology used for the loose coupling and the commands the user needs in an input file to perform such an analysis. All commands related to coupled analyses are described and examples are provided.

More Details

A 3-D Vortex Code for Parachute Flow Predictions: VIPAR Version 1.0

Strickland, James H.; Homicz, Gregory F.; Porter, V.L.

This report describes a 3-D fluid mechanics code for predicting flow past bluff bodies whose surfaces can be assumed to be made up of shell elements that are simply connected. Version 1.0 of the VIPAR code (Vortex Inflation PARachute code) is described herein. This version contains several first order algorithms that we are in the process of replacing with higher order ones. These enhancements will appear in the next version of VIPAR. The present code contains a motion generator that can be used to produce a large class of rigid body motions. The present code has also been fully coupled to a structural dynamics code in which the geometry undergoes large time dependent deformations. Initial surface geometry is generated from triangular shell elements using a code such as Patran and is written into an ExodusII database file for subsequent input into VIPAR. Surface and wake variable information is output into two ExodusII files that can be post processed and viewed using software such as EnSight{trademark}.

More Details

On the development of a gridless inflation code for parachute simulations

16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar

Strickland, James H.; Homicz, G.F.; Gossler, A.A.; Porter, V.L.

In this paper the current status of an unsteady 3D parachute simulation code that is being developed at Sandia National Laboratories under the Department of Energy's Accelerated Strategic Computing Initiative (ASCI) is discussed. The Vortex Inflation PARachute code (VIPAR) that embodies this effort is being developed to perform complete numerical simulations of ribbon parachute deployment, inflation, and steady descent utilizing several thousand processors on one of the DOE "teraFLOP" computers. First generation working serial and parallel versions of the uncoupled fluids code that simulate unsteady 3D incompressible flows around bluff bodies with complex geometries have been developed. Preliminary results from the uncoupled fluids code along with the fluid-structure coupling strategy are presented herein.

More Details
42 Results
42 Results