Heavy metals released from kerogen to produced water during oil/gas extraction have caused major environmental concerns. To curtail water usage and production in an operation and to use the same process for carbon sequestration, supercritical CO2 (scCO2) has been suggested as a fracking fluid or an oil/gas recovery agent. It has been shown previously that injection of scCO2 into a reservoir may cause several chemical and physical changes to the reservoir properties including pore surface wettability, gas sorption capacity, and transport properties. Using molecular dynamics simulations, we here demonstrate that injection of scCO2 might lead to desorption of physically adsorbed metals from kerogen structures. This process on one hand may impact the quality of produced water. On the other hand, it may enhance metal recovery if this process is used for in-situ extraction of critical metals from shale or other organic carbon-rich formations such as coal.
Swelling clay hydration/dehydration is important to many environmental and industrial processes. Experimental studies usually probe equilibrium hydration states in an averaged manner and thus cannot capture the fast water transport and structural change in interlayers during hydration/dehydration. Using molecular simulations and thermogravimetric analyses, we observe a two-stage dehydration process. The first stage is controlled by evaporation at the edges: water molecules near hydrophobic sites and the first few water molecules of the hydration shell of cations move fast to particle edges for evaporation. The second stage is controlled by slow desorption of the last 1-2 water molecules from the cations and slow transport through the interlayers. The two-stage dehydration is strongly coupled with interlayer collapse and the coordination number changes of cations, all of which depend on layer charge distribution. This mechanistic interpretation of clay dehydration can be key to the coupled chemomechanical behavior in natural/engineered barriers.
Using molecular dynamics simulations, we investigate the molecular scale origin of crystal face selectivity when one gibbsite particle attaches to another in water. A comparison of the free energy per unit surface area of particle–particle attachment indicates that particle attachment through edge surfaces, where the edge surfaces are either (1 0 0) or (1 1 0) crystal faces, is more energetically favorable compared to attachment between two basal surfaces (i.e., (0 0 1) crystal faces) or between the basal surface of one particle and the edge surface of another. This result suggests that gibbsite crystals with low basal/edge surface area ratio will preferentially attach through edge surfaces, potentially helping the crystals grow laterally. However, for larger gibbsite particles (high basal/edge surface area ratio) the total free energy, not normalized by surface area, of particle attachment through the basal surfaces is lower (more negative) than attachment through the edge surfaces, indicating that larger gibbsite particles will preferentially aggregate through basal surface attachments. The short-range electrostatic interactions including the interparticle hydrogen bonds from surface –OH groups drive particle attachment, and the dominant contribution to the free energy minimum is enthalpic rather than entropic. However, the enthalpy of basal-edge attachment is significantly offset by the entropy leading to a higher free energy (less negative) compared to that of basal-basal attachment. Study of the free energy for a few imperfect attachments of two particles indicates a higher free energy (i.e., less negative, less stable), compared to a perfect attachment
Upon extraction/injection of a large quantity of gas from/into a subsurface system in shale gas production or carbon sequestration, the gas pressure varies remarkably, which may significantly change the wettability of porous media involved. Mechanistic understanding of such changes is critical for designing and optimizing a related subsurface engineering process. Using molecular dynamics simulations, we have calculated the contact angle of a water droplet on various solid surfaces (kerogen, pyrophyllite, calcite, gibbsite, and montmorillonite) as a function of CO2 or CH4 gas pressure up to 200 atm at a temperature of 300 K. The calculation reveals a complex behavior of surface wettability alteration by gas pressure variation depending on surface chemistry and structure, and molecular interactions of fluid molecules with surfaces. As the CO2 gas pressure increases, a partially hydrophilic kerogen surface becomes highly hydrophobic, while a calcite surface becomes more hydrophilic. Considering kerogen and calcite being the major components of a shale formation, we postulate that the wettability alteration of a solid surface induced by a gas pressure change may play an important role in fluid flows in shale gas production and geological carbon sequestration.
The DOE R&D program under the Spent Fuel Waste Science Technology (SFWST) campaign has made key progress in modeling and experimental approaches towards the characterization of chemical and physical phenomena that could impact the long-term safety assessment of heatgenerating nuclear waste disposition in deep-seated clay/shale/argillaceous rock. International collaboration activities such as heater tests, continuous field data monitoring, and postmortem analysis of samples recovered from these have elucidated key information regarding changes in the engineered barrier system (EBS) material exposed to years of thermal loads. Chemical and structural analyses of sampled bentonite material from such tests as well as experiments conducted on these are key to the characterization of thermal effects affecting bentonite clay barrier performance and the extent of sacrificial zones in the EBS during the thermal period. Thermal, hydrologic, and chemical data collected from heater tests and laboratory experiments has been used in the development, validation, and calibration of THMC simulators to model near-field coupled processes. This information leads to the development of simulation approaches (e.g., continuum and discrete) to tackle issues related to flow and transport at various scales of the host-rock, its interactions with barrier materials, and EBS design concept.
This interim report is an update of ongoing experimental and modeling work on bentonite material described in Jové Colón et al. (2019, 2020) from past international collaboration activities. As noted in Jové Colón et al. (2020), work on international repository science activities such as FEBEX-DP and DECOVALEX19 is either no longer continuing by the international partners. Nevertheless, research activities on the collected sample materials and field data are still ongoing. Descriptions of these underground research laboratory (URL) R&D activities are described elsewhere (Birkholzer et al. 2019; Jové Colón et al. 2020) but will be explained here when needed. The current reports recent reactive-transport modeling on the leaching of sedimentary rock.
Water flow in nanometer or sub-nanometer hydrophilic channels bears special importance in diverse fields of science and engineering. However, the nature of such water flow remains elusive. Here, we report our molecular-modeling results on water flow in a sub-nanometer clay interlayer between two montmorillonite layers. We show that a fast advective flow can be induced by evaporation at one end of the interlayer channel, that is, a large suction pressure created by evaporation (∼818 MPa) is able to drive the fast water flow through the channel (∼0.88 m/s for a 46 Å-long channel). Scaled up for the pressure gradient to a 2 μm particle, the velocity of water is estimated to be about 95 μm/s, indicating that water can quickly flow through a μm-sized clay particle within seconds. The prediction seems to be confirmed by our thermogravimetric analysis of bentonite hydration and dehydration processes, which indicates that water transport at the early stage of the dehydration is a fast advective process, followed by a slow diffusion process. The possible occurrence of a fast advective water flow in clay interlayers prompts us to reassess water transport in a broad set of natural and engineered systems such as clay swelling/shrinking, moisture transport in soils, water uptake by plants, water imbibition/release in unconventional hydrocarbon reservoirs, and cap rock integrity of supercritical CO2 storage.
In shale gas production, gas composition may vary over time. To understand this phenomenon, we use molecular dynamics simulations to study the permeation of CH4, C2H6 and their mixture from a source container through a pyrophyllite nanopore driven by a pressure gradient. For a pure gas, the flow rate of CH4 is always higher than that of C2H6, regardless of pore size. For a 1:1 C2H6: CH4 mixture, however, C2H6:CH4 flow rate ratio is higher than the compositional ratio in the container (i.e., 1:1) when the pore size is smaller than ~1.8 nm. The selective transport is caused by the competitive adsorption of C2H6 over CH4 in the nanopore. The selectivity is also determined by the interplay between the surface diffusion of the adsorbed molecules and the viscous flow in the center of the pore, and it diminishes as the viscous flow becomes to dominate the surface diffusion when the pore size becomes larger than 1.8 nm. Our work shows that compositional differentiation of shale gas in production is a consequence of nanopore confinement and therefore a key characteristic of an unconventional reservoir. The related compositional information can potentially be used for monitoring the status of a production well such as its recovery rate.
A molecular-scale understanding of the transition between hydration states in clay minerals remains a challenging problem because of the very fast stepwise swelling process observed from X-ray diffraction (XRD) experiments. XRD profile modeling assumes the coexistence of multiple hydration states in a clay sample to fit the experimental XRD pattern obtained under humid conditions. While XRD profile modeling provides a macroscopic understanding of the heterogeneous hydration structure of clay minerals, a microscopic model of the transition between hydration states is still missing. Here, for the first time, we use molecular dynamics simulation to investigate the transition states between a dry interlayer, one-layer hydrate, and two-layer hydrate. We find that the hydrogen bonds that form across the interlayer at the clay particle edge make an important contribution to the energy barrier to interlayer hydration, especially for initial hydration.
Understanding the viscosity and friction of a fluid under nanoconfinement is the key to nanofluidics research. Existing work on nanochannel flow enhancement has been focused on simple systems with only one to two fluids considered such as water flow in carbon nanotubes, and large slip lengths have been found to be the main factor for the massive flow enhancement. In this study, we use molecular dynamics simulations to study the fluid flow of a ternary mixture of octane-carbon dioxide-water confined within two muscovite and kerogen surfaces. The results indicate that, in a muscovite slit, supercritical CO2 (scCO2) and H2O both enhance the flow of octane due to (i) a decrease in the friction of octane with the muscovite wall because of the formation of thin layers of H2O and scCO2 near the surfaces; and (ii) a reduction in the viscosity of octane in nanoconfinement. Water reduces octane viscosity by weakening the interaction of octane with the muscovite surface, while scCO2 reduces octane viscosity by weakening both octane-octane and octane-surface interactions. In a kerogen slit, water does not play any significant role in changing the friction or viscosity of octane. In contrast, scCO2 reduces both the friction and the viscosity of octane, and the enhancement of octane flow is mainly caused by the reduction of viscosity. Our results highlight the importance of multicomponent interactions in nanoscale fluid transport. The results presented here also have a direct implication in enhanced oil recovery in unconventional reservoirs.
A fluid flow in a nanochannel highly depends on the wettability of the channel surface to the fluid. The permeability of the nanochannel is usually very low, largely due to the adhesion of fluid at the solid interfaces. Using molecular dynamics (MD) simulations, we demonstrate that the flow of water in a nanochannel with rough hydrophilic surfaces can be significantly enhanced by the presence of a thin layer of supercritical carbon dioxide (scCO2) at the water-solid interfaces. The thin scCO2 layer acts like an atomistic lubricant that transforms a hydrophilic interface into a super-hydrophobic one and triggers a transition from a stick- to- a slip boundary condition for a nanoscale flow. This work provides an atomistic insight into multicomponent interactions in nanochannels and illustrates that such interactions can be manipulated, if needed, to increase the throughput and energy efficiency of nanofluidic systems.
Jove Colon, Carlos F.; Payne, Clay P.; Knight, Andrew W.; Ho, Tuan A.; Rutqvist, Jonny R.; kim, Kunwi k.; Xu, Hao X.; Guglielmi, Yves G.; Birkholzer, Jens T.; Caporuscio, Florie C.; Sauer, Kirsten B.; Rock, M.J.R.; Houser, L.M.H.; Jerden, James L.; Gattu, V.G.; Ebert, William E.
The DOE R&D program under the Spent Fuel Waste Science Technology (SFWST) campaign has made key progress in modeling and experimental approaches towards the characterization of chemical and physical phenomena that could impact the long-term safety assessment of nuclear waste disposition in deep clay/shale/argillaceous rock. Interactional collaboration activities such as heater tests, particularly postmortem sample recovery and analysis, have elucidated important information regarding changes in engineered barrier system (EBS) material exposed to years of thermal loads. Chemical and structural analyses of bentonite material from such tests has been key to the characterization of thermal effects affecting clay composition, sorption behavior, and swelling. These are crucial to evaluating the nature and extent of bentonite barrier sacrificial zones in the EBS during the thermal period. Thermal, hydrologic, and chemical data collected from heater tests and laboratory experiments has been used in the development and validation of THMC simulators to model near-field coupled processes affecting engineered and natural barrier materials, particularly during the thermal period. This information leads to the development of simulation approaches (e.g., continuum vs. discrete) to tackle issues related to flow and transport depending on the nature of the host-rock and EBS design concept. This report describes R&D efforts on disposal in argillaceous geologic media through developments of coupled THMC process models, hydrothermal experiments and characterization of clay/metal barrier material interactions, and spent fuel and canister material degradation. Currently, the THM modeling focus is on heater test experiments in argillite rock and gas migration in bentonite as part of international collaboration activities at underground research laboratories (URLs). In addition, field testing at an URL involves probing of fault movement and characterization of fault permeability changes. Analyses of barrier samples (bentonite) from heater tests at URLs provide compositional and structural data to evaluate changes in clay swelling and thermal behavior with distance from the heater surface. Development of a spent fuel degradation model coupled with canister corrosion effects has been centered towards its integration with Generic Disposal System Analysis (GDSA) to describe source term behavior. As in previous milestone deliverables, this report is structured according to various national laboratory contributions describing R&D activities applicable to clay/shale/argillite media.
The adsorption equilibrium constants of monovalent and divalent cations to material surfaces in aqueous media are central to many technological, natural, and geochemical processes. Cation adsorption-desorption is often proposed to occur in concert with proton transfer on hydroxyl-covered mineral surfaces, but to date this cooperative effect has been inferred indirectly. This work applies density functional theory-based molecular dynamics simulations of explicit liquid water/mineral interfaces to calculate metal ion desorption free energies. Monodentate adsorption of Na+, Mg2+, and Cu2+ on partially deprotonated silica surfaces are considered. Na+ is predicted to be unbound, while Cu2+ exhibits binding free energies to surface SiO- groups that are larger than those of Mg2+. The predicted trends agree with competitive adsorption measurements on fumed silica surfaces. As desorption proceeds, Cu2+ dissociates one of the H2O molecules in its first solvation shell, turning into Cu2+(OH-)(H2O)3, while Mg remains Mg2+(H2O)6. The protonation state of the SiO- group at the initial binding site does not vary monotonically with cation desorption.
Methane (CH4) and carbon dioxide (CO2), the two major components generated from kerogen maturation, are stored dominantly in nanometer-sized pores in shale matrix as (1) a compressed gas, (2) an adsorbed surface species and/or (3) a species dissolved in pore water (H2O). In addition, supercritical CO2 has been proposed as a fracturing fluid for simultaneous enhanced oil/gas recovery (EOR) and carbon sequestration. A mechanistic understanding of CH4-CO2-H2O interactions in shale nanopores is critical for designing effective operational processes. Using molecular simulations, we show that kerogen preferentially retains CO2 over CH4 and that the majority of CO2 either generated during kerogen maturation or injected in EOR will remain trapped in the kerogen matrix. The trapped CO2 may be released only if the reservoir pressure drops below the supercritical CO2 pressure. When water is present in the kerogen matrix, it may block CH4 release. However, the addition of CO2 may enhance CH4 release because CO2 can diffuse through water and exchange for adsorbed methane in the kerogen nanopores.
Kerogen plays a central role in hydrocarbon generation in an oil/gas reservoir. In a subsurface environment, kerogen is constantly subjected to stress confinement or relaxation. The interplay between mechanical deformation and gas adsorption of the materials could be an important process for shale gas production but unfortunately is poorly understood. Using a hybrid Monte Carlo/molecular dynamics simulation, we show here that a strong chemo-mechanical coupling may exist between gas adsorption and mechanical strain of a kerogen matrix. The results indicate that the kerogen volume can expand by up to 5.4% and 11% upon CH4 and CO2 adsorption at 192 atm, respectively. The kerogen volume increases with gas pressure and eventually approaches a plateau as the kerogen becomes saturated. The volume expansion appears to quadratically increase with the amount of gas adsorbed, indicating a critical role of the surface layer of gas adsorbed in the bulk strain of the material. Furthermore, gas uptake is greatly enhanced by kerogen swelling. Swelling also increases the surface area, porosity, and pore size of kerogen. Our results illustrate the dynamic nature of kerogen, thus questioning the validity of the current assumption of a rigid kerogen molecular structure in the estimation of gas-in-place for a shale gas reservoir or gas storage capacity for subsurface carbon sequestration. The coupling between gas adsorption and kerogen matrix deformation should be taken into consideration.
The porosity of clay aggregates is an important property governing chemical reactions and fluid flow in low-permeability geologic formations and clay-based engineered barrier systems. Pore spaces in clays include interlayer and interparticle pores. Under compaction and dewatering, the size and geometry of such pore spaces may vary significantly (sub-nanometer to microns) depending on ambient physical and chemical conditions. Here we report a molecular dynamics simulation method to construct a complex and realistic clay-like nanoparticle aggregate with interparticle pores and grain boundaries. The model structure is then used to investigate the effect of dewatering and water content on micro-porosity of the aggregates. The results suggest that slow dewatering would create more compact aggregates compared to fast dewatering. Furthermore, the amount of water present in the aggregates strongly affects the particle-particle interactions and hence the aggregate structure. Detailed analyses of particle-particle and water-particle interactions provide a molecular-scale view of porosity and texture development of the aggregates. The simulation method developed here may also aid in modeling the synthesis of nanostructured materials through self-assembly of nanoparticles.
Using molecular dynamics simulation, we studied the density fluctuations and cavity formation probabilities in aqueous solutions and their effect on the hydration of CO2. With increasing salt concentration, we report an increased probability of observing a larger than the average number of species in the probe volume. Our energetic analyses indicate that the van der Waals and electrostatic interactions between CO2 and aqueous solutions become more favorable with increasing salt concentration, favoring the solubility of CO2 (salting in). However, due to the decreasing number of cavities forming when salt concentration is increased, the solubility of CO2 decreases. The formation of cavities was found to be the primary control on the dissolution of gas, and is responsible for the observed CO2 salting-out effect. Finally, our results provide the fundamental understanding of the density fluctuation in aqueous solutions and the molecular origin of the salting-out effect for real gas.