Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

As the complexity of composite laminates rises, the use of hybrid structures and multi-directional laminates, large operating temperature ranges, the process induced residual stresses become a significant factor in the design. In order to properly model the initial stress state of a structure, a solid understanding of the stress free temperature, the temperature at which the initial crosslinks are formed, as well as the contribution of cure shrinkage, must be measured. Many in industry have moved towards using complex cure kinetics models with the assistance of commercial software packages such as COMPRO. However, in this study a simplified residual stress model using the coefficient of thermal expansion (CTE) mismatch and change in temperature from the stress free temperature are used. The limits of this simplified model can only be adequately tested using an accurate measure of the stress free temperature. Only once that is determined can the validity of the simplified model be determined. Various methods were used in this study to test for the stress free temperature and their results are used to validate each method. Two approaches were taken, both involving either cobonded carbon fiber reinforced polymer (CFRP) or glass fiber reinforced polymer (GFRP) to aluminum. The first method used a composite-aluminum plate which was allowed to warp due to the residual stress. The other involved producing a geometrical stable hybrid composite-aluminum cylinder which was then cut open to allow it to spring in. Both methods placed the specimens within an environmental chamber and tracked the residual stress induced deformation as the temperature was ramped beyond the stress free temperature. Both methods revealed a similar stress free temperature that could then be used in future cure modeling simulations.

Abstract not provided.

Abstract not provided.

This work is to characterize the mechanical performances of the selected composites with four different overlap lengths of 0.25 in, 0.5 in, 0,75 in and 1.0 in. The composite materials in this study were one carbon composite (AS4C/UF3662) and one glass (E-glass/UF3662) composite. They both had the same resin of UF 3362, but with different fibers of carbon AS4C and E-glass. The mechanical loading in this study was limited to the quasi-static loading of 2 mm/min, which was equivalent to 5x10( -4 ) strain rate. Digital cameras were set up to record images during the mechanical testing. The full-field deformation data obtained from Digital Image Correlation (DIC) and the side view of the specimens were used to understand the different failure modes of the composites. The maximum load and the ultimate strength with consideration of the location of the failure for the different overlap lengths were compared and plotted together to understand the effect of the overlap lengths on the mechanical performance of the overlapped composites. 4 6

The moisture absorption behavior of two fiber reinforced composite materials was evaluated in a unidirectional manner The flat materials were exposed to varying humidity and temperature conditions inside of an environmental chamber in order to determine their effective moisture equilibrium (M m ) and moisture absorption rate (D z ). Two-ply (thin) and four-ply (thick) materials were utilized to obtain M,,, and Dz, respectively. The results obtained from laboratory work were then compared to modeling data to better understand the material properties. Predictions capabilities were built to forecast the maximum moisture content, time required for saturation, and the moisture content at any given humidity and temperature. A case study was included to demonstrate this capability. Also of interest were cubed samples to investigate directionality preferences in water immersion studies. Several coatings were evaluated for their water permeation properties. Further dissemination authorized to the Department of Energy and DOE contractors only; other requests shall be approved by the originating facility or higher DOE programmatic authority.

This report describes the mechanical characterization of six types of woven composites that Sandia National Laboratories are interested in. These six composites have various combinations of two types of fibers (Carbon-IM7 and Glass-S2) and three types of resins (UF- 3362, TC275-1, TC350-1). In this work, two sets of experiments were conducted: quasi-static loading with displacement rate of 2 mm/min (1.3x10^( -3 ) in/s) and high rate loading with displacement of 5.08 m/s (200 in/s). Quasi-static experiments were performed at three loading orientations of 0deg, 45deg, 90deg for all the six composites to fully characterize their mechanical properties. The elastic properties Young's modulus and Poisson's ratio, as well as ultimate stress and strain were obtained from the quasi-static experiments. The high strain rate experiments were performed only on glass fiber composites along 0deg angle of loading. The high rate experiments were mainly to study how the strain rate affects the ultimate stress of the glass-fiber composites with different resins.

This work is to characterize the mechanical properties of the selected composites along both on- and off- fiber axes at the ambient loading condition (+25 o C), as well as at the cold (- 54 o C), and high temperatures (+71 o C). A series of tensile experiments were conducted at different material orientations of 0 o , 22.5 o, 45 o , 67.5 o , 90 o to measure the ultimate strength and strain f, f, and material engineering constants, including Young's modulus E, Poisson's ratio , The composite materials in this study were one carbon composite carbon (AS4C/UF3662) and one E-galss (E-glass/UF3662) composite. They both had the same resin of UF 3362, but with different fibers of carbon AS4C and E-glass. The mechanical loading in this study was limited to the quasi-static loading of 2 mm/min (1.3x10 ^(-3) in/s), which was equivalent to 5x10 (-4) strain rate. These experimental data of the mechanical properties of composites at different loading directions and temperatures were summarized and compared. These experimental results provided database for design engineers to optimize structures through ply angle modifications and for analysts to better predict the component performance.

Abstract not provided.

Abstract not provided.

Process-induced residual stresses occur in composite structures composed of dissimilar materials. As these residual stresses could result in fracture, their consideration when designing composite parts is necessary. However, the experimental determination of residual stresses in prototype parts can be time and cost prohibitive. Alternatively, it is possible for computational tools to predict potential residual stresses. Therefore, the objectives of the presented work are to demonstrate an efficient method for simulating residual stresses in composite parts, as well as the potential value of statistical methods during analyses for which material properties are unknown. Specifically, a simplified residual stress modeling approach is implemented within Sandia National Laboratories’ SIERRA/SolidMechanics code. Concurrent with the model development, bi-material composite structures are designed and manufactured to exhibit significant residual stresses. Then, the presented modeling approach is rigorously verified and validated through simulations of the bi-material composite structures’ manufacturing processes, including a mesh convergence study, sensitivity analysis, and uncertainty quantification. The simulations’ final results show adequate agreement with the experimental measurements, indicating the validity of a simple modeling approach, as well as a necessity for the inclusion of material parameter uncertainty in the final residual stress predictions.

Abstract not provided.

Abstract not provided.

Fiber reinforced polymer composites are frequently used in hybrid structures where they are co-cured or co-bonded to dissimilar materials. For autoclave cured composites, this interface typically forms at an elevated temperature that can be quite different from the part’s service temperature. As a result, matrix shrinkage and CTE mismatch can produce significant residual stresses at this bi-material interface. This study shows that the measured critical strain energy release rate, Gc, can be quite sensitive to the residual stress state of this interface. If designers do not properly account for the effect of these process induced stresses, there is danger of a nonconservative design. Tests including double cantilever beam (DCB) and end notched flexure (ENF) were conducted on a co-cured GFRP-CFRP composite panel across a wide range of temperatures. These results are compared to tests performed on monolithic GFRP and CFRP panels.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.