Publications

55 Results
Skip to search filters

Towards single-chip radiofrequency signal processing via acoustoelectric electron–phonon interactions

Nature Communications

Hackett, Lisa; Miller, Michael R.; Brimigion, Felicia M.; Dominguez, Daniel D.; Peake, Gregory M.; Tauke-Pedretti, Anna; Arterburn, Shawn C.; Friedmann, Thomas A.; Eichenfield, Matthew S.

The addition of active, nonlinear, and nonreciprocal functionalities to passive piezoelectric acoustic wave technologies could enable all-acoustic and therefore ultra-compact radiofrequency signal processors. Toward this goal, we present a heterogeneously integrated acoustoelectric material platform consisting of a 50 nm indium gallium arsenide epitaxial semiconductor film in direct contact with a 41° YX lithium niobate piezoelectric substrate. We then demonstrate three of the main components of an all-acoustic radiofrequency signal processor: passive delay line filters, amplifiers, and circulators. Heterogeneous integration allows for simultaneous, independent optimization of the piezoelectric-acoustic and electronic properties, leading to the highest performing surface acoustic wave amplifiers ever developed in terms of gain per unit length and DC power dissipation, as well as the first-ever demonstrated acoustoelectric circulator with an isolation of 46 dB with a pulsed DC bias. Finally, we describe how the remaining components of an all-acoustic radiofrequency signal processor are an extension of this work.

More Details

Strategies relating to CMP for die to wafer interconnects utilizing hybrid direct bonding

Proceedings - Electronic Components and Technology Conference

Sierra Suarez, Jonatan A.; Mudrick, John M.; Sennett, Crystal C.; Friedmann, Thomas A.; Arterburn, Shawn C.; Jordan, Matthew J.; Caravello, Lisa N.; Gutierrez, Jordan E.; Henry, Michael D.

In this study we examine a split-foundry multilevel application specific integrated circuit (ASIC) Si-interposer and die bonded using the direct bond interface (DBI) process, in addition to shortloop vehicles. The designs have been subject to relaxed pattern density rules, and exhibit chemical mechanical planarization (CMP) systematic process issues of varying degrees. We find that the interconnect formation is robust against moderate dielectric thickness variation, as well as a moderate degree of copper corrosion. We discuss and demonstrate various CMP methods which have a clear and repeatable impact. Pattern density effects and defectivity on the bond quality are examined using focused ion beam scanning electron microscope (FIB-SEM) images at the feature scale (sub 100 um) and intra-die scale (few mm). Impact to the CMP performance, including plug recess, and defectivity are discussed.

More Details

A heterogeneously integrated silicon photonic/lithium niobate travelling wave electro-optic modulator

Optics Express

Boynton, Nicholas; Cai, Hong; Gehl, M.; Arterburn, Shawn C.; Dallo, Christina M.; Pomerene, Andrew P.; Starbuck, Andrew L.; Hood, Dana; Trotter, Douglas C.; Friedmann, Thomas A.; Derose, Christopher T.; Lentine, Anthony L.

Silicon photonics is a platform that enables densely integrated photonic components and systems and integration with electronic circuits. Depletion mode modulators designed on this platform suffer from a fundamental frequency response limit due to the mobility of carriers in silicon. Lithium niobate-based modulators have demonstrated high performance, but the material is difficult to process and cannot be easily integrated with other photonic components and electronics. In this manuscript, we simultaneously take advantage of the benefits of silicon photonics and the Pockels effect in lithium niobate by heterogeneously integrating silicon photonic-integrated circuits with thin-film lithium niobate samples. We demonstrate the most CMOS-compatible thin-film lithium niobate modulator to date, which has electro-optic 3 dB bandwidths of 30.6 GHz and half-wave voltages of 6.7 V×cm. These modulators are fabricated entirely in CMOS facilities, with the exception of the bonding of a thin-film lithium niobate sample post fabrication, and require no etching of lithium niobate.

More Details

A heterogeneously integrated silicon photonic/lithium niobate platform for RF photonics

AVFOP 2019 - Avionics and Vehicle Fiber-Optics and Photonics Conference

Boynton, Nicholas; Cai, Hong; Gehl, M.; Arterburn, Shawn C.; Dallo, Christina M.; Pomerene, Andrew P.; Starbuck, Andrew L.; Hood, Dana; Trotter, Douglas C.; Friedmann, Thomas A.; Lentine, Anthony L.; DeRose, Christopher T.

We present a 30 GHz heterogeneously integrated silicon photonic/lithium niobate Mach-Zehnder modulator simultaneously utilizing the strong Pockels effect in LiNbO3 while also taking advantage of the ability for photonic/electronic integration and mass production associated with silicon photonics. Aside from the final step of bonding the LiNbO3, this modulator can be entirely fabricated using CMOS facilities.

More Details

Active and Nonreciprocal Radio-Frequency Acoustic Microsystems

Hackett, Lisa A.; Siddiqui, Aleem M.; Dominguez, Daniel D.; Douglas, James K.; Tauke-Pedretti, Anna; Friedmann, Thomas A.; Peake, Gregory M.; Arterburn, Shawn C.; Miller, Michael R.; Eichenfield, Matthew S.

Radio frequency (RF) devices are becoming more multi-band, increasing the number of filters and other front-end components while simultaneously pushing towards reduced cost, size, weight, and power (CSWaP). One approach to reducing CSWaP is to augment the achievable functionalities of electromechanical/acoustic filtering chips to include "active" and nonlinear functionalities, such as gain and mixing. The acoustoelectric (AE) effect could enable such active acoustic wave devices. We have examined the AE effect with a leaky surface acoustic wave (LSAW) in a monolithic structure of epitaxial indium gallium arsenide (In GaAs) on lithium niobate (LiNb0 3 ). This lead to experimentally demonstrated state-of-the-art SAW amplifier performance in terms of gain per acoustic wavelength, reduced power consumption, and increased power efficiency. We quantitatively compare the amplifier performance to previous notable works and discuss the outlook of active acoustic wave components using this material platform. Ultimately, this could lead to smaller, higher-performance RF signal processors for communications applications.

More Details

High-gain leaky surface acoustic wave amplifier in epitaxial InGaAs on lithium niobate heterostructure

Applied Physics Letters

Hackett, L.; Siddiqui, A.; Dominguez, Daniel D.; Douglas, James K.; Tauke-Pedretti, Anna; Friedmann, Thomas A.; Peake, G.; Arterburn, Shawn C.; Eichenfield, Matthew S.

Active surface acoustic wave components have the potential to transform RF front ends by consolidating functionalities that currently occur across multiple chip technologies, leading to reduced insertion loss from converting back and forth between acoustic and electronic domains in addition to improved size and power efficiency. This letter demonstrates a significant advance in these active devices with a compact, high-gain, and low-power leaky surface acoustic wave amplifier based on the acoustoelectric effect. Devices use an acoustically thin semi-insulating InGaAs surface film on a YX lithium niobate substrate to achieve exceptionally high acoustoelectric interaction strength via an epitaxial In0.53Ga0.47As(P)/InP quaternary layer structure and wafer-scale bonding. We demonstrate 1.9 dB of gain per acoustic wavelength and power consumption of 90 mW for 30 dB of electronic gain. Despite the strong intrinsic leaky propagation loss, 5 dB of terminal gain is obtained for a semiconductor that is only 338 μm long due to state-of-the-art heterogenous integration and an improved material platform.

More Details

Large Acoustoelectric Effect in Wafer Bonded Indium Gallium Arsenide / Lithium Niobate Heterostructure Augmented by Novel Gate Control

2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII

Siddiqui, Aleem M.; Hackett, Lisa A.; Dominguez, Daniel D.; Tauke-Pedretti, Anna; Friedmann, Thomas A.; Peake, Gregory M.; Miller, Michael R.; Douglas, James K.; Eichenfield, Matthew S.

This paper demonstrates a monolithic surface acoustic wave amplifier fabricated by state-of-the-art heterogenous integration of a IH-V InGaAs-based epitaxial material stack and LiNb03. Due to the superior properties of the materials employed, we observe electron gain and also non-reciprocal gain in excess of 30dB with reduced power consumption. Additionally, we present a framework for performance optimization as a function of material parameters for a targeted gain. This platform enables further advances in active and non-reciprocal piezoelectric acoustic devices.

More Details

Sub-10μm pitch hybrid direct bond interconnect development for die-to-die hybridization

Proceedings - Electronic Components and Technology Conference

Mudrick, John M.; Sierra Suarez, Jonatan A.; Jordan, Matthew J.; Friedmann, Thomas A.; Jarecki, Robert L.; Henry, M.D.

Direct bond interconnect (DBI) processes enable chip to chip, low resistivity electrical connections for 2.5-D scaling of electrical circuits and heterogenous integration. This work describes SiO2/Cu DBI technology with Cu interconnect performance investigated over a range of inter-die Cu gap heights and post-bond annealing temperatures. Chemical mechanical polishing (CMP) generates wafers with a controlled Cu recess relative to the SiO2 surface, yielding die pairs with inter-die Cu gap heights ranging between 9 and 47 nm. Bonded die with different gap heights show similar per-connection resistance after annealing at 400 degrees Celsius but annealing at lower temperatures between 250 and 350 degrees Celsius results in failing or high-resistance interconnects with intermediate gaps showing lowest resistance. Cross-section scanning electron microscope (SEM) image analysis shows that the microstructure is largely independent of post-bond annealing temperature, suggesting that the temperature behavior is due to nanoscale scale interfacial effects not observable by SEM. The bond strength is affirmed by successful step-wise mechanical and chemical removal of the handle silicon layer to reveal metal from both die. This work demonstrates a 2.5-D integration method using a 3 micron Cu DBI process on a 7.5 micron pitch with electrical contacts ranging between 3.8 and 4.8 Ohms per contact plug.

More Details

Optomechanical spring effect readout in resonant micro-optical Sagnac gyroscopes design and scaling analysis

International Conference on Optical MEMS and Nanophotonics

Grine, Alejandro J.; Siddiqui, A.; Keeler, Gordon A.; Shaw, M.J.; Eichenfield, Matthew S.; Friedmann, Thomas A.; Douglas, Erica A.; Wood, M.G.; Dagel, D.J.; Hains, C.; Koch, L.F.; Nordquist, C.D.; Serkland, Darwin K.

We propose and theoretically analyze a new cavity optomechanical oscillator gyroscope. Mechanical frequency acts as a sensitive readout of rotation through the optomechanical spring and Sagnac effects. Remarkably, reducing device size improves scale factor.

More Details

Efficient second harmonic generation in lithium niobate on insulator

2016 Conference on Lasers and Electro-Optics, CLEO 2016

Moore, Jeremy M.; Douglas, James K.; Frank, Ian W.; Friedmann, Thomas A.; Camacho, Ryan C.; Eichenfield, Matthew S.

We demonstrate doubly resonant second harmonic generation from 1550 to 775 nm in microdisks fabricated from lithium niobate on insulator wafers. We use a novel phase matching technique to achieve a conversion efficiency of 0.167%/mW.

More Details

Phonon engineering for nanostructures

Friedmann, Thomas A.; Piekos, Edward S.; Sullivan, John P.; Peebles, Diane E.

Understanding the physics of phonon transport at small length scales is increasingly important for basic research in nanoelectronics, optoelectronics, nanomechanics, and thermoelectrics. We conducted several studies to develop an understanding of phonon behavior in very small structures. This report describes the modeling, experimental, and fabrication activities used to explore phonon transport across and along material interfaces and through nanopatterned structures. Toward the understanding of phonon transport across interfaces, we computed the Kapitza conductance for {Sigma}29(001) and {Sigma}3(111) interfaces in silicon, fabricated the interfaces in single-crystal silicon substrates, and used picosecond laser pulses to image the thermal waves crossing the interfaces. Toward the understanding of phonon transport along interfaces, we designed and fabricated a unique differential test structure that can measure the proportion of specular to diffuse thermal phonon scattering from silicon surfaces. Phonon-scale simulation of the test ligaments, as well as continuum scale modeling of the complete experiment, confirmed its sensitivity to surface scattering. To further our understanding of phonon transport through nanostructures, we fabricated microscale-patterned structures in diamond thin films.

More Details

Defect-related internal dissipation in mechanical resonators and the study of coupled mechanical systems

Sullivan, John P.; Czaplewski, David A.; Friedmann, Thomas A.; Modine, N.A.; Wendt, J.R.

More Details

A comparison of mechanical properties of three MEMS materials - Silicon carbide, ultrananocrystalline diamond, and hydrogen-free tetrahedral amorphous carbon (Ta-C)

11th International Conference on Fracture 2005, ICF11

Espinosa, H.D.; Peng, B.; Moldovan, N.; Friedmann, Thomas A.; Xiao, X.; Mancini, D.C.; Auciello, O.; Carlisle, J.; Zorman, C.A.

Many MEMS devices are based on polysilicon because of the current availability of surface micromachining technology. However, polysilicon is not the best choice for devices where extensive sliding and/or thermal fields are applied due to its chemical, mechanical and tribological properties. In this work, we investigated the mechanical properties of three new materials for MEMS/NEMS devices: silicon carbide (SiC) from Case Western Reserve University (CWRU), ultrananocrystalline diamond (UNCD) from Argonne National Laboratory (ANL), and hydrogen-free tetrahedral amorphous carbon (ta-C) from Sandia National Laboratories (SNL). Young's modulus, characteristic strength, fracture toughness, and theoretical strength were measured for these three materials using only one testing methodology - the Membrane Deflection Experiment (MDE) developed at Northwestern University. The measured values of Young's modulus were 430GPa, 960GPa, and 800GPa for SiC, UNCD, and ta-C, repectively. Fracture toughness measurments resulted in values of 3.2, 4.5, and 6.2 MPa×m 1/2, respectively. The strengths were found to follow a Weibull distribution but their scaling was found to be controlled by different specimen size parameters. Therefore, a cross comparison of the strengths is not fully meaningful. We instead propose to compare their theoretical strengths as determined by employing Novozhilov fracture criterion. The estimated theoretical strength for SiC is 10.6GPa at a characteristic length of 58nm, for UNCD is 18.6GPa at a characteristic length of 37nm, and for ta-C is 25.4GPa at a characteristic length of 38nm. The techniques used to obtained these results as well as microscopic fractographic analyses are summarized in the article. We also highlight the importance of characterizing mechanical properties of MEMS materials by means of only one simple and accurate experimental technique.

More Details

Mechanical dissipation at elevated temperatures in tetrahedral amorphous carbon

Proposed for publication in Diamond and Related Materials

Sullivan, John P.; Friedmann, Thomas A.; Wendt, J.R.

We have measured the temperature dependence of mechanical dissipation in tetrahedral amorphous carbon flexural and torsional resonators over the temperature range from 300 to 1023 K. The mechanical dissipation was found to be controlled by defects within the material, and the magnitude and temperature dependence of the dissipation were found to depend on whether flexural or torsional vibrational modes were excited. The defects that were active under flexural stresses have a relatively flat concentration from 0.4 to 0.7 eV with an ever increasing defect concentration up to 1.9 eV. Under shear stresses (torsion), the defect activation energies increase immediately beginning at 0.4 eV, with increasing defect concentration at higher energies.

More Details

An aluminum resist substrate for microfabrication by LIGA

Griffiths, Stewart K.; Lu, Wei-Yang L.; Hekmaty, Michelle A.; McLean, Dorrance E.; Yang, Chu-Yeu P.; Friedmann, Thomas A.; Losey, Matthew W.; Hachman, John T.; Skala, Dawn M.; Hunter, Lucas L.; Yang, Nancy Y.; Boehme, Dale R.; Korellis, John S.; Aigeldinger, Georg A.

Resist substrates used in the LIGA process must provide high initial bond strength between the substrate and resist, little degradation of the bond strength during x-ray exposure, acceptable undercut rates during development, and a surface enabling good electrodeposition of metals. Additionally, they should produce little fluorescence radiation and give small secondary doses in bright regions of the resist at the substrate interface. To develop a new substrate satisfying all these requirements, we have investigated secondary resist doses due to electrons and fluorescence, resist adhesion before exposure, loss of fine features during extended development, and the nucleation and adhesion of electrodeposits for various substrate materials. The result of these studies is a new anodized aluminum substrate and accompanying methods for resist bonding and electrodeposition. We demonstrate successful use of this substrate through all process steps and establish its capabilities via the fabrication of isolated resist features down to 6 {micro}m, feature aspect ratios up to 280 and electroformed nickel structures at heights of 190 to 1400 {micro}m. The minimum mask absorber thickness required for this new substrate ranges from 7 to 15 {micro}m depending on the resist thickness.

More Details

Nano-electromechanical oscillators (NEMOs) for RF technologies

Friedmann, Thomas A.; Boyce, Brad B.; Czaplewski, David A.; Dyck, Christopher D.; Webster, James R.; Carton, Andrew J.; Carr, Dustin W.; Keeler, Bianca E.; Wendt, J.R.; Tallant, David T.

Nano-electromechanical oscillators (NEMOs), capacitively-coupled radio frequency (RF) MEMS switches incorporating dissipative dielectrics, new processing technologies for tetrahedral amorphous carbon (ta-C) films, and scientific understanding of dissipation mechanisms in small mechanical structures were developed in this project. NEMOs are defined as mechanical oscillators with critical dimensions of 50 nm or less and resonance frequencies approaching 1 GHz. Target applications for these devices include simple, inexpensive clocks in electrical circuits, passive RF electrical filters, or platforms for sensor arrays. Ta-C NEMO arrays were used to demonstrate a novel optomechanical structure that shows remarkable sensitivity to small displacements (better than 160 fm/Hz {sup 1/2}) and suitability as an extremely sensitive accelerometer. The RF MEMS capacitively-coupled switches used ta-C as a dissipative dielectric. The devices showed a unipolar switching response to a unipolar stimulus, indicating the absence of significant dielectric charging, which has historically been the major reliability issue with these switches. This technology is promising for the development of reliable, low-power RF switches. An excimer laser annealing process was developed that permits full in-plane stress relaxation in ta-C films in air under ambient conditions, permitting the application of stress-reduced ta-C films in areas where low thermal budget is required, e.g. MEMS integration with pre-existing CMOS electronics. Studies of mechanical dissipation in micro- and nano-scale ta-C mechanical oscillators at room temperature revealed that mechanical losses are limited by dissipation associated with mechanical relaxation in a broad spectrum of defects with activation energies for mechanical relaxation ranging from 0.35 eV to over 0.55 eV. This work has established a foundation for the creation of devices based on nanomechanical structures, and outstanding critical research areas that need to be addressed for the successful application of these technologies have been identified.

More Details

Amorphous Diamond MEMS and Sensors

Sullivan, John P.; Friedmann, Thomas A.; Ashby, Carol I.; De Boer, Maarten P.; Schubert, William K.; Shul, Randy J.; Hohlfelder, Robert J.

This report describes a new microsystems technology for the creation of microsensors and microelectromechanical systems (MEMS) using stress-free amorphous diamond (aD) films. Stress-free aD is a new material that has mechanical properties close to that of crystalline diamond, and the material is particularly promising for the development of high sensitivity microsensors and rugged and reliable MEMS. Some of the unique properties of aD include the ability to easily tailor film stress from compressive to slightly tensile, hardness and stiffness 80-90% that of crystalline diamond, very high wear resistance, a hydrophobic surface, extreme chemical inertness, chemical compatibility with silicon, controllable electrical conductivity from insulating to conducting, and biocompatibility. A variety of MEMS structures were fabricated from this material and evaluated. These structures included electrostatically-actuated comb drives, micro-tensile test structures, singly- and doubly-clamped beams, and friction and wear test structures. It was found that surface micromachined MEMS could be fabricated in this material easily and that the hydrophobic surface of the film enabled the release of structures without the need for special drying procedures or the use of applied hydrophobic coatings. Measurements using these structures revealed that aD has a Young's modulus of {approx}650 GPa, a tensile fracture strength of 8 GPa, and a fracture toughness of 8 MPa{center_dot}m {sup 1/2}. These results suggest that this material may be suitable in applications where stiction or wear is an issue. Flexural plate wave (FPW) microsensors were also fabricated from aD. These devices use membranes of aD as thin as {approx}100 nm. The performance of the aD FPW sensors was evaluated for the detection of volatile organic compounds using ethyl cellulose as the sensor coating. For comparable membrane thicknesses, the aD sensors showed better performance than silicon nitride based sensors. Greater than one order of magnitude increase in chemical sensitivity is expected through the use of ultra-thin aD membranes in the FPW sensor. The discoveries and development of the aD microsystems technology that were made in this project have led to new research projects in the areas of aD bioMEMS and aD radio frequency MEMS.

More Details
55 Results
55 Results