The addition of active, nonlinear, and nonreciprocal functionalities to passive piezoelectric acoustic wave technologies could enable all-acoustic and therefore ultra-compact radiofrequency signal processors. Toward this goal, we present a heterogeneously integrated acoustoelectric material platform consisting of a 50 nm indium gallium arsenide epitaxial semiconductor film in direct contact with a 41° YX lithium niobate piezoelectric substrate. We then demonstrate three of the main components of an all-acoustic radiofrequency signal processor: passive delay line filters, amplifiers, and circulators. Heterogeneous integration allows for simultaneous, independent optimization of the piezoelectric-acoustic and electronic properties, leading to the highest performing surface acoustic wave amplifiers ever developed in terms of gain per unit length and DC power dissipation, as well as the first-ever demonstrated acoustoelectric circulator with an isolation of 46 dB with a pulsed DC bias. Finally, we describe how the remaining components of an all-acoustic radiofrequency signal processor are an extension of this work.
In this study we examine a split-foundry multilevel application specific integrated circuit (ASIC) Si-interposer and die bonded using the direct bond interface (DBI) process, in addition to shortloop vehicles. The designs have been subject to relaxed pattern density rules, and exhibit chemical mechanical planarization (CMP) systematic process issues of varying degrees. We find that the interconnect formation is robust against moderate dielectric thickness variation, as well as a moderate degree of copper corrosion. We discuss and demonstrate various CMP methods which have a clear and repeatable impact. Pattern density effects and defectivity on the bond quality are examined using focused ion beam scanning electron microscope (FIB-SEM) images at the feature scale (sub 100 um) and intra-die scale (few mm). Impact to the CMP performance, including plug recess, and defectivity are discussed.
Silicon photonics is a platform that enables densely integrated photonic components and systems and integration with electronic circuits. Depletion mode modulators designed on this platform suffer from a fundamental frequency response limit due to the mobility of carriers in silicon. Lithium niobate-based modulators have demonstrated high performance, but the material is difficult to process and cannot be easily integrated with other photonic components and electronics. In this manuscript, we simultaneously take advantage of the benefits of silicon photonics and the Pockels effect in lithium niobate by heterogeneously integrating silicon photonic-integrated circuits with thin-film lithium niobate samples. We demonstrate the most CMOS-compatible thin-film lithium niobate modulator to date, which has electro-optic 3 dB bandwidths of 30.6 GHz and half-wave voltages of 6.7 V×cm. These modulators are fabricated entirely in CMOS facilities, with the exception of the bonding of a thin-film lithium niobate sample post fabrication, and require no etching of lithium niobate.
We present a 30 GHz heterogeneously integrated silicon photonic/lithium niobate Mach-Zehnder modulator simultaneously utilizing the strong Pockels effect in LiNbO3 while also taking advantage of the ability for photonic/electronic integration and mass production associated with silicon photonics. Aside from the final step of bonding the LiNbO3, this modulator can be entirely fabricated using CMOS facilities.
Radio frequency (RF) devices are becoming more multi-band, increasing the number of filters and other front-end components while simultaneously pushing towards reduced cost, size, weight, and power (CSWaP). One approach to reducing CSWaP is to augment the achievable functionalities of electromechanical/acoustic filtering chips to include "active" and nonlinear functionalities, such as gain and mixing. The acoustoelectric (AE) effect could enable such active acoustic wave devices. We have examined the AE effect with a leaky surface acoustic wave (LSAW) in a monolithic structure of epitaxial indium gallium arsenide (In GaAs) on lithium niobate (LiNb0 3 ). This lead to experimentally demonstrated state-of-the-art SAW amplifier performance in terms of gain per acoustic wavelength, reduced power consumption, and increased power efficiency. We quantitatively compare the amplifier performance to previous notable works and discuss the outlook of active acoustic wave components using this material platform. Ultimately, this could lead to smaller, higher-performance RF signal processors for communications applications.
Active surface acoustic wave components have the potential to transform RF front ends by consolidating functionalities that currently occur across multiple chip technologies, leading to reduced insertion loss from converting back and forth between acoustic and electronic domains in addition to improved size and power efficiency. This letter demonstrates a significant advance in these active devices with a compact, high-gain, and low-power leaky surface acoustic wave amplifier based on the acoustoelectric effect. Devices use an acoustically thin semi-insulating InGaAs surface film on a YX lithium niobate substrate to achieve exceptionally high acoustoelectric interaction strength via an epitaxial In0.53Ga0.47As(P)/InP quaternary layer structure and wafer-scale bonding. We demonstrate 1.9 dB of gain per acoustic wavelength and power consumption of 90 mW for 30 dB of electronic gain. Despite the strong intrinsic leaky propagation loss, 5 dB of terminal gain is obtained for a semiconductor that is only 338 μm long due to state-of-the-art heterogenous integration and an improved material platform.
This paper demonstrates a monolithic surface acoustic wave amplifier fabricated by state-of-the-art heterogenous integration of a IH-V InGaAs-based epitaxial material stack and LiNb03. Due to the superior properties of the materials employed, we observe electron gain and also non-reciprocal gain in excess of 30dB with reduced power consumption. Additionally, we present a framework for performance optimization as a function of material parameters for a targeted gain. This platform enables further advances in active and non-reciprocal piezoelectric acoustic devices.
Direct bond interconnect (DBI) processes enable chip to chip, low resistivity electrical connections for 2.5-D scaling of electrical circuits and heterogenous integration. This work describes SiO2/Cu DBI technology with Cu interconnect performance investigated over a range of inter-die Cu gap heights and post-bond annealing temperatures. Chemical mechanical polishing (CMP) generates wafers with a controlled Cu recess relative to the SiO2 surface, yielding die pairs with inter-die Cu gap heights ranging between 9 and 47 nm. Bonded die with different gap heights show similar per-connection resistance after annealing at 400 degrees Celsius but annealing at lower temperatures between 250 and 350 degrees Celsius results in failing or high-resistance interconnects with intermediate gaps showing lowest resistance. Cross-section scanning electron microscope (SEM) image analysis shows that the microstructure is largely independent of post-bond annealing temperature, suggesting that the temperature behavior is due to nanoscale scale interfacial effects not observable by SEM. The bond strength is affirmed by successful step-wise mechanical and chemical removal of the handle silicon layer to reveal metal from both die. This work demonstrates a 2.5-D integration method using a 3 micron Cu DBI process on a 7.5 micron pitch with electrical contacts ranging between 3.8 and 4.8 Ohms per contact plug.
We propose and theoretically analyze a new cavity optomechanical oscillator gyroscope. Mechanical frequency acts as a sensitive readout of rotation through the optomechanical spring and Sagnac effects. Remarkably, reducing device size improves scale factor.
We demonstrate doubly resonant second harmonic generation from 1550 to 775 nm in microdisks fabricated from lithium niobate on insulator wafers. We use a novel phase matching technique to achieve a conversion efficiency of 0.167%/mW.