Publications

During the last few years Sandia is actively pursuing the development of new accelerators based on the novel technology of Linear Transformer Driver (LTD). This effort is done in close collaboration with the High Current Electronic Institute (HCEI) in Tomsk, Russia, where the LTD idea was first conceived and developed. LTD based drivers are currently considered for many applications including future very high current Z-pinch drivers like ZX and IFE (Inertial Fusion Energy), medium current drivers with adjustable pulse length for ICE (Isentropic Compression Experiments), and finally relatively lower current accelerators for radiography and x-pinch. Currently we have in operation the following devices: One 500-kA, 100-kV LTD cavity, a 1-MVvoltage adder composed of seven smaller LTD cavities for radiography, and one 1-MA, 100-kV cavity. The first two are in Sandia while the latter one is still in Tomsk. In addition a number of stackable 1-MA cavities are under construction to be utilized as building blocks for a 1-MA, 1-MV voltage adder module. This module will serve as a prototype for longer, higher voltage modules, a number of which, connected in parallel, could become the driver of an IFE fusion reactor or a high current Z-pinch driver (ZX). The IFE requirements are more demanding since the driver must operate in rep-rated mode with a frequency of 0.1 Hz. In this paper we mainly concentrate on the higher current LTDs: We briefly outline the principles of operation and architecture and present a first cut design of an IFE, LTD z-pinch driver. © 2005 IEEE.

Abstract not provided.

Abstract not provided.

Abstract not provided.

A new laser trigger system (LTS) has been installed on Z that benefits the experimenter with reduced temporal jitter on the x-ray output, the confidence to use command triggers for time sensitive diagnostics and the ability to shape the current pulse at the load. This paper presents work on the pulse shaping aspects of the new LTS. Pulse shaping is possible because the trigger system is based on 36 individual lasers, one per each pulsed power module, instead of a single laser for the entire machine. The firing time of each module can be individually controlled to create an overall waveform that is the linear superposition of all 36 modules. In addition, each module can be set to a long- or short-pulse mode for added flexibility. The current waveform has been stretched from ∼100 ns to ∼250 ns. A circuit model has been developed with BERTHA Code, which contains the independent timing feature of the new LTS to predict and design pulse shapes. The ability to pulse-shape directly benefits isentropic compression experiments (ICE) and equation of state measurements (EOS) for the shock physics programs at Sandia National Laboratories. With the new LTS, the maximum isentropic loading applied to Cu samples 750 um thick has been doubled to 3.2 Mb without generating a shockwave. Macroscopically thick sample of Al, 1.5 mm, have been isentropically compressed to 1.7 Mb. Also, shockless Ti flyer-plates have been launched to 21 km·s-1, remaining in the solid state until impact.

Abstract not provided.