Research

Water quality signals from sensors provide a snapshot of the water quality at the monitoring station at discrete sample times. These data are typically processed by event detection systems to determine the probability of a water quality event occurring at each sample time. Inherent noise in sensor data and rapid changes in water quality due to operational actions can cause false alarms in event detection systems. While the event determination can be made solely on the data from each signal at the current time step, combining data across signals and backwards in time can provide a richer set of data for event detection. Here we examine the ability of algebraic combinations and other transformations of the raw signals to further decrease false alarms. As an example, using operational events such as one or more pumps turning on or off to define a period of decreased detection sensitivity is one approach to limiting false alarms. This method is effective when lag times are known or when the sensors are co-located with the equipment causing the change. The CANARY software was used to test and demonstrate these combinatorial techniques for improving sensitivity and decreasing false alarms on both background data and data with simulated events. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. © 2012 ASCE.

More Details

TYPE Conference YEAR 2012

Scopus OSTI

Optimal determination of grab sample locations and source inversion in large-scale water distribution systems

Water Distribution Systems Analysis 2010 - Proceedings of the 12th International Conference, WDSA 2010

Wong, Angelica; Young, James; Laird, Carl D.; Hart, William E.; Mckenna, Sean A.

We present a mixed-integer linear programming formulation to determine optimal locations for manual grab sampling after the detection of contaminants in a water distribution system. The formulation selects optimal manual grab sample locations that maximize the total pair-wise distinguishability of candidate contamination events. Given an initial contaminant detection location, a source inversion is performed that will eliminate unlikely events resulting in a much smaller set of candidate contamination events. We then propose a cyclical process where optimal grab samples locations are determined and manual grab samples taken. Relying only on YES/NO indicators of the presence of contaminant, source inversion is performed to reduce the set of candidate contamination events. The process is repeated until the number of candidate events is sufficiently small. Case studies testing this process are presented using water network models ranging from 4 to approximately 13000 nodes. The results demonstrate that the contamination event can be identified within a remarkably small number of sampling cycles using very few sampling teams. Furthermore, solution times were reasonable making this formulation suitable for real-time settings. © 2012 ASCE.

More Details

TYPE Conference YEAR 2012

Scopus OSTI