Publications

33 Results
Skip to search filters

Electroreduction of Er3+ in nonaqueous solvents

RSC Advances

Small, Leo J.; Sears, Jeremiah M.; Lambert, Timothy N.; Boyle, Timothy J.; Hess, Ryan F.

The electroreduction of Er3+ in propylene carbonate, N,N-dimethylformamide, or a variety of quaternary ammonium ionic liquids (ILs) was investigated using [Er(OTf)3] and [Er(NTf2)3]. Systematic variation of the ILs' cation and anion, Er3+ salt, and electrode material revealed a disparity in electrochemical interactions not previously seen. For most ILs at a platinum electrode, cyclic voltammetry exhibits irreversible interactions between Er3+ salts and the electrode at potentials significantly less than the theoretical reduction potential for Er3+. Throughout all solvent-salt systems tested, a deposit could be formed on the electrode, though obtaining a high purity, crystalline Er0 deposit is challenging due to the extreme reactivity of the deposit and resulting chemical interactions, often resulting in the formation of a complex, amorphous solid-electrolyte interface that slowed deposition rates. Comparison of platinum, gold, nickel, and glassy carbon (GC) working electrodes revealed oxidation processes unique to the platinum surface. While no appreciable reduction current was observed on GC at the potentials investigated, deposits were seen on platinum, gold, and nickel electrodes.

More Details
TYPE Journal Article YEAR 2016
ScopusOSTIDOI

Development of a downhole tool measuring real-time concentration of ionic tracers and pH in geothermal reservoirs

Proceedings of SPIE - The International Society for Optical Engineering

Hess, Ryan F.; Boyle, Timothy J.; Limmer, Steven J.; Yelton, William G.; Bingham, Samuel; Stillman, Greg; Lindblom, Scott; Cieslewski, Grzegorz C.

For enhanced or Engineered Geothermal Systems (EGS) geothermal brine is pumped to the surface via the production wells, the heat extracted to turn a turbine to generate electricity, and the spent brine re-injected via injection wells back underground. If designed properly, the subsurface rock formations will lead this water back to the extraction well as heated brine. Proper monitoring of these geothermal reservoirs is essential for developing and maintaining the necessary level of productivity of the field. Chemical tracers are commonly used to characterize the fracture network and determine the connectivity between the injection and production wells. Currently, most tracer experiments involve injecting the tracer at the injection well, manually collecting liquid samples at the wellhead of the production well, and sending the samples off for laboratory analysis. While this method provides accurate tracer concentration data at very low levels of detection, it does not provide information regarding the location of the fractures which were conducting the tracer between wellbores. Sandia is developing a high-temperature electrochemical sensor capable of measuring tracer concentrations and pH downhole on a wireline tool. The goal of this effort is to collect real-time pH and ionic tracer concentration data at temperatures up to 225 °C and pressures up to 3000 psi. In this paper, a prototype electrochemical sensor and the initial data obtained will be presented detailing the measurement of iodide tracer concentrations at high temperature and pressure in a newly developed laboratory scale autoclave. © 2014 SPIE.

More Details
TYPE Presentation YEAR 2014
ScopusOSTI

Scandium separation from tungsten crucibles :

Boyle, Timothy J.; Hess, Ryan F.; Neville, Michael L.; Howard, Panit C.

The first step in an attempt to isolate Sco from a Wo crucible was explored by soaking the samples in a series of organic (HOAc) and inorganic (HCl, H2SO4, H3PO4, HNO3) acids. All samples, except the HOAc, yielded a powder. The weight loss suggests that HNO3 is the most efficient solvent; however, the powders were tentatively identified by PXRD and found to contain both W and Sc by-products. The higher weight loss may also indicate dissolution of the Wo crucible, which was further evidenced upon visual inspection of the crucible. The H3PO4 acid soak yielded the cleanest removal of Sc from the crucible. More work to understand the separation of the Sco from the Wo crucible is necessary but the acid routes appear to hold promise under not as of yet established criteria.

More Details
TYPE SAND Report YEAR 2013
OSTIDOI
33 Results
33 Results