Piezoelectric polymers based on polyvinylidene fluoride (PVDF) are of interest for large aperture space-based telescopes as adaptive or smart materials. Dimensional adjustments of adaptive polymer films depend on controlled charge deposition. Predicting their long-term performance requires a detailed understanding of the piezoelectric material features, expected to suffer due to space environmental degradation. Hence, the degradation and performance of PVDF and its copolymers under various stress environments expected in low Earth orbit has been reviewed and investigated. Various experiments were conducted to expose these polymers to elevated temperature, vacuum UV, {gamma}-radiation and atomic oxygen. The resulting degradative processes were evaluated. The overall materials performance is governed by a combination of chemical and physical degradation processes. Molecular changes are primarily induced via radiative damage, and physical damage from temperature and atomic oxygen exposure is evident as depoling, loss of orientation and surface erosion. The effects of combined vacuum UV radiation and atomic oxygen resulted in expected surface erosion and pitting rates that determine the lifetime of thin films. Interestingly, the piezo responsiveness in the underlying bulk material remained largely unchanged. This study has delivered a comprehensive framework for material properties and degradation sensitivities with variations in individual polymer performances clearly apparent. The results provide guidance for material selection, qualification, optimization strategies, feedback for manufacturing and processing, or alternative materials. Further material qualification should be conducted via experiments under actual space conditions.
This report summarizes results generated on a 5-year cable-aging program that constituted part of the Nuclear Energy Plant Optimization (NEPO) program, an effort cosponsored by the U. S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI). The NEPO cable-aging effort concentrated on two important issues involving the development of better lifetime prediction methods as well as the development and testing of novel cable condition-monitoring (CM) techniques. To address improved life prediction methods, we first describe the use of time-temperature superposition principles, indicating how this approach improves the testing of the Arrhenius model by utilizing all of the experimentally generated data instead of a few selected and processed data points. Although reasonable superposition is often found, we show several cases where non-superposition is evident, a situation that violates the constant acceleration assumption normally used in accelerated aging studies. Long-term aging results over extended temperature ranges allow us to show that curvature in Arrhenius plots for elongation is a common occurrence. In all cases the curvature results in a lowering of the Arrhenius activation energy at lower temperatures implying that typical extrapolation of high temperature results over-estimates material lifetimes. The long-term results also allow us to test the significance of extrapolating through the crystalline melting point of semi-crystalline materials. By utilizing ultrasensitive oxygen consumption (UOC) measurements, we show that it is possible to probe the low temperature extrapolation region normally inaccessible to conventional accelerated aging studies. This allows the quantitative testing of the often-used Arrhenius extrapolation assumption. Such testing indicates that many materials again show evidence of ''downward'' curvature (E{sub a} values drop as the aging temperature is lowered) consistent with the limited elongation results and many literature results. It is also shown how the UOC approach allows the probing of temperatures that cross through the crystalline melting point region of semi-crystalline materials such as XLPO and EPR cable insulations. New results on combined environment aging of neoprene and hypalon cable jacketing materials are presented and offer additional evidence in support of our time-temperature-dose rate (t-T-DR) superposition approach that had been used successfully in the past for such situations.
Smart polymeric materials, such as piezoelectric polymers which deform by application of an electric field, are of interest for use in controllable mirrors as large, lightweight space optics. An important consideration when using any organic material in a space application is their extreme vulnerability to the space environment. In LEO the presence of atomic oxygen, large thermal extremes, hard vacuum, short wavelength ultraviolet and particulate radiation can result in erosion, cracking and outgassing of most polymers. While much research has been performed examining the physical and chemical changes incurred by polymers exposed to actual and simulated LEO environments, little work has focused on the effects of the space environment on the performance of piezoelectric polymers. The most widely used piezoelectric polymers are those based on poly(vinylidene fluoride) (PVDF) and include copolymers synthesized from vinylidene fluoride and trifluoroethylene, hexafluoropropylene or chlorotrifluoroethylene. The presence of a comonomer group can greatly influence on the crystalline phase, melting point, Curie point, modulus and processing required for piezoelectricity. After a rigorous pre-selection process only two polymers, namely the PVDF homopolymer and a TrFE copolymer (80% comonomer content), satisfied most of the requirements for operation in the temperature/radiation environment of LEO. Based on this initial materials selection, we have now performed a detailed study of the effects of temperature, atomic oxygen and vacuum UV radiation simulating low Earth orbit conditions on these two polymers. Both polymers exhibited diminished but very stable piezoelectric performance up to 130 C despite the upper use temperatures suggested by industry of 80 C (PVDF) and 100 C (P(VDF-TrFE)). We believe that the loss of piezoelectric response in samples conditioned at 130 C compared with non-exposed samples is partly due to the depoling process which occurs when the highly stressed films undergo contraction via relaxation. The TrFE copolymer, which does not need to be stretched for the polar phase to be present, has better retention of piezoelectric properties at 130 C compared with the highly oriented homopolymer. AO/VUV exposure caused significant surface erosion and pattern development for both polymers. Erosion yields were 2.8 x 10{sup -24} cm{sup 3}/atom for PVDF and 2.5 x 10{sup -24} cm{sup 3}/atom for P(VDF-TrFE). The piezoelectric properties of the residual material for both polymers were largely unchanged after exposure, although a slight shift in the Curie transition of the P(VDF-TrFE) was observed. A lightly crosslinked network was formed in the copolymer, presumably due to penetrating VUV radiation, while the homopolymer remained uncrosslinked. These differences were attributed to different levels of crystallinity and increased VUV absorption by P(VDF-TrFE) over PVDF. In this paper a summary of the performance limiting effects of temperature, radiation, atomic oxygen and VUV on the piezoelectric response of PVDF based polymers will be presented.
Smart polymeric materials, such as piezoelectric polymers which deform by application of an electric field, are of interest for use in controllable mirrors as large, lightweight space optics. An important consideration when using any organic material in a space application is their extreme vulnerability to the space environment. In LEO the presence of atomic oxygen, large thermal extremes, hard vacuum, short wavelength ultraviolet and particulate radiation can result in erosion, cracking and outgassing of most polymers. While much research has been performed examining the physical and chemical changes incurred by polymers exposed to actual and simulated LEO environments, little work has focused on the effects of the space environment on the performance of piezoelectric polymers. The most widely used piezoelectric polymers are those based on poly(vinylidene fluoride) (PVDF) and include copolymers synthesized from vinylidene fluoride and trifluoroethylene, hexafluoropropylene or chlorotrifluoroethylene. The presence of a comonomer group can greatly influence on the crystalline phase, melting point, Curie point, modulus and processing required for piezoelectricity. After a rigorous pre-selection process only two polymers, namely the PVDF homopolymer and a TrFE copolymer (80% comonomer content), satisfied most of the requirements for operation in the temperature/radiation environment of LEO. Based on this initial materials selection, we have now performed a detailed study of the effects of temperature, atomic oxygen and vacuum UV radiation simulating low Earth orbit conditions on these two polymers. Both polymers exhibited diminished but very stable piezoelectric performance up to 130 C despite the upper use temperatures suggested by industry of 80 C (PVDF) and 100 C (P(VDF-TrFE)). We believe that the loss of piezoelectric response in samples conditioned at 130 C compared with non-exposed samples is partly due to the depoling process which occurs when the highly stressed films undergo contraction via relaxation. The TrFE copolymer, which does not need to be stretched for the polar phase to be present, has better retention of piezoelectric properties at 130 C compared with the highly oriented homopolymer. AO/VUV exposure caused significant surface erosion and pattern development for both polymers. Erosion yields were 2.8 x 10{sup -24} cm{sup 3}/atom for PVDF and 2.5 x 10{sup -24} cm{sup 3}/atom for P(VDF-TrFE). The piezoelectric properties of the residual material for both polymers were largely unchanged after exposure, although a slight shift in the Curie transition of the P(VDF-TrFE) was observed. A lightly crosslinked network was formed in the copolymer, presumably due to penetrating VUV radiation, while the homopolymer remained uncrosslinked. These differences were attributed to different levels of crystallinity and increased VUV absorption by P(VDF-TrFE) over PVDF. In this paper a summary of the performance limiting effects of temperature, radiation, atomic oxygen and VUV on the piezoelectric response of PVDF based polymers will be presented.
An S-band 20 MeV electron linear accelerator formerly used for medical applications has been recommissioned to provide a wide range of photonuclear activation studies as well as various radiation effects on biological and microelectronic systems. Four radiation effect applications involving the electron/photon beams are described. Photonuclear activation of a stable isotope of oxygen provides an active means of characterizing polymer degradation. Biological irradiations of microorganisms including bacteria were used to study total dose and dose-rate effects on survivability and the adaptation of these organisms to repeated exposures. Microelectronic devices including bipolar junction transistors (BJTs) and diodes were irradiated to study photocurrent from these devices as a function of peak dose rate with comparisons to computer modeling results. In addition, the 20 MeV linac may easily be converted to a medium energy neutron source which has been used to study neutron damage effects on transistors.
Solid-state {sup 1}H NMR relaxometry studies were conducted on a hydroxy-terminated polybutadiene (HTPB) based polyurethane elastomer thermo-oxidatively aged at 80 C. The {sup 1}H T{sub 1}, T{sub 2}, and T{sub 1{rho}} relaxation times of samples thermally aged for various periods of time were determined as a function of NMR measurement temperature. The response of each measurement was calculated from a best-fit linear function of the relaxation time vs. aging time. It was found that the T{sub 2,H} and T{sub 1{rho},H} relaxation times exhibited the largest response to thermal degradation, whereas T{sub 1,H} showed minimal change. All of the NMR relaxation measurements on solid samples showed significantly less sensitivity to thermal aging than the T{sub 2,H} relaxation times of solvent-swollen samples.
In this paper we examine the utility of several promising material condition monitoring (CM) techniques applied to a commercial polychloroprene cable jacketing material used in nuclear power plant applications. These include two relatively unknown approaches, cross-sectional modulus profiling and NMR T2 relaxation time measurements of solvent-swelled samples, as well as three more commonly used approaches, density, gel fraction and solvent uptake. The results from each approach were compared to tensile elongation measurements, the usual standard approach for monitoring degradation of elastomers. Degradation was carried out at three temperatures and at four combined radiation plus thermal environments, all of which were selected (by theoretical modeling and later confirmed by cross-sectional degradation mapping) such that oxidation proceeded uniformly throughout the cross-section of the material. This allowed macroscopic condition monitoring measurements to be made in the absence of anomalous diffusion-limited oxidation effects. Of the techniques examined, modulus profiling, solvent uptake and NMR T2 measurements correlated extremely well with the elongation measurements and therefore showed substantial potential as CM approaches for this material. This is not unexpected since all of these techniques are sensitive to crosslinking of the material and the deterioration of the elongation is itself dominated by material hardening and thus by crosslinking. Published by Elsevier Ltd.