Publications

Abstract not provided.

Abstract not provided.

The human brain (volume=1200cm3) consumes 20W and is capable of performing > 10^16 operations/s. Current supercomputer technology has reached 1015 operations/s, yet it requires 1500m^3 and 3MW, giving the brain a 10^12 advantage in operations/s/W/cm^3. Thus, to reach exascale computation, two achievements are required: 1) improved understanding of computation in biological tissue, and 2) a paradigm shift towards neuromorphic computing where hardware circuits mimic properties of neural tissue. To address 1), we will interrogate corticostriatal networks in mouse brain tissue slices, specifically with regard to their frequency filtering capabilities as a function of input stimulus. To address 2), we will instantiate biological computing characteristics such as multi-bit storage into hardware devices with future computational and memory applications. Resistive memory devices will be modeled, designed, and fabricated in the MESA facility in consultation with our internal and external collaborators.

An ultra-compact optical true time delay device is demonstrated that can support 112 antenna elements with better than six bits of delay in a volume 16″x5″x4″ including the box and electronics. Free-space beams circulate in a White cell, overlapping in space to minimize volume. The 18 mirrors are slow-tool diamond turned on two substrates, one at each end, to streamline alignment. Pointing accuracy of better than 10?rad is achieved, with surface roughness ∼45 nm rms. A MEMS tip-style mirror array selects among the paths for each beam independently, requiring ∼100 μs to switch the whole array. The micromirrors have 1.4° tip angle and three stable states (east, west, and flat). The input is a fiber-andmicrolens array, whose output spots are re-imaged multiple times in the White cell, striking a different area of the single MEMS chip in each of 10 bounces. The output is converted to RF by an integrated InP wideband optical combiner detector array. Delays were accurate to within 4% (shortest delay) to 0.03% (longest mirror train). The fiber-to- detector insertion loss is 7.82 dB for the shortest delay path. © 2010 SPIE.

Microfabrication methods have been applied to the fabrication of wire arrays suitable for use in Z. Self-curling GaAs/AlGaAs supports were fabricated as an initial route to make small wire arrays (4mm diameter). A strain relief structure that could be integrated with the wire was designed to allow displacements of the anode/cathode connections in Z. Electroplated gold wire arrays with integrated anode/cathode bus connections were found to be sufficiently robust to allow direct handling. Platinum and copper plating processes were also investigated. A process to fabricate wire arrays on any substrate with wire thickness up to 35 microns was developed. Methods to handle and mount these arrays were developed. Fabrication of wire arrays of 20mm diameter was demonstrated, and the path to 40mm array fabrication is clear. With some final investment to show array mounting into Z hardware, the entire process to produce a microfabricated wire array will have been demonstrated.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Micromirrors arrays can be used to correct residual wavefront aberrations in certain optical systems. The aberration correction capability of arrays of piston-only and piston-tip-tilt micromirrors are compared. Sandia's micromirror fabrication program is discussed and two example systems are presented. © 2006 SPIE-OSA.

Abstract not provided.

Microsystems are potentially exposed to laser irradiation during processing, diagnostic measurements, and, in some cases, device operation. The behavior of the components in an optical MEMS device that are irradiated by a laser needs to be optimized for reliable operation. Utilizing numerical simulations facilitates design and optimization. This paper reports on experimental and numerical investigations of the thermomechanical response of polycrystalline silicon microcantilevers that are 250 {micro}m wide, 500 {micro}m long, and 2.25 {micro}m thick when heated by an 808 nm laser. At laser powers above 400 mW significant deflection is observed during the laser pulse using a white light interferometer. Permanent deformation is detected at laser powers above 650 mW in the experiments. Numerical calculations using a coupled physics finite element code, Calagio, agree qualitatively with the experimental results. Both the experimental and numerical results reveal that the initial stress state is very significant. Microcantilevers deflect in the direction of their initial deformation upon irradiation with a laser.

Optical microswitches are being developed for use in communication and security systems because of their small size and fast response time. However, as the intensity of the light incident on the microswitches increases, the thermal and mechanical responses of the reflective surfaces are becoming a concern. It is important to dissipate heat adequately and to minimize any deformation on the reflective surfaces. To understand the mechanical responses of these microswitches, a set of microstructures have been fabricated and tested to evaluate how the surfaces deform when irradiated with a high-intensity laser beam. To evaluate and further investigate the experimental findings, the coupled physical analysis tool, Calagio, has been applied to simulate the mechanical behavior of these test structures when they are optically heated. Code prediction of the surface displacement will be compared against measurement. Our main objective is to assess the existing material models and our code predictive capability so that it will be used to qualify the performance of microswitches being developed.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Recent world events have underscored the need for a satellite based persistent global surveillance capability. To be useful, the satellite must be able to continuously monitor objects the size of a person anywhere on the globe and do so at a low cost. One way to satisfy these requirements involves a constellation of satellites in low earth orbit capable of resolving a spot on the order of 20 cm. To reduce cost of deployment, such a system must be dramatically lighter than a traditional satellite surveillance system with a high spatial resolution. The key to meeting this requirement is a lightweight optics system with a deformable primary and secondary mirrors and an adaptive optic subsystem correction of wavefront distortion. This proposal is concerned with development of MEMS micromirrors for correction of aberrations in the primary mirror and improvement of image quality, thus reducing the optical requirements on the deployable mirrors. To meet this challenge, MEMS micromirrors must meet stringent criteria on their performance in terms of flatness, roughness and resolution of position. Using Sandia's SUMMIT foundry which provides the world's most sophisticated surface MEMS technology as well as novel designs optimized by finite element analysis will meet severe requirements on mirror travel range and accuracy.

Many MEMS-based components require optical monitoring techniques using optoelectronic devices for converting mechanical position information into useful electronic signals. While the constituent piece-parts of such hybrid opto-MEMS components can be separately optimized, the resulting component performance, size, ruggedness and cost are substantially compromised due to assembly and packaging limitations. GaAs MOEMS offers the possibility of monolithically integrating high-performance optoelectronics with simple mechanical structures built in very low-stress epitaxial layers with a resulting component performance determined only by GaAs microfabrication technology limitations. GaAs MOEMS implicitly integrates the capability for radiation-hardened optical communications into the MEMS sensor or actuator component, a vital step towards rugged integrated autonomous microsystems that sense, act, and communicate. This project establishes a new foundational technology that monolithically combines GaAs optoelectronics with simple mechanics. Critical process issues addressed include selectivity, electrochemical characteristics, and anisotropy of the release chemistry, and post-release drying and coating processes. Several types of devices incorporating this novel technology are demonstrated.

Hadamard Transform Spectrometer (HTS) approaches share the multiplexing advantages found in Fourier transform spectrometers. Interest in Hadamard systems has been limited due to data storage/computational limitations and the inability to perform accurate high order masking in a reasonable amount of time. Advances in digital micro-mirror array (DMA) technology have opened the door to implementing an HTS for a variety of applications including fluorescent microscope imaging and Raman imaging. A Hadamard transform spectral imager (HTSI) for remote sensing offers a variety of unique capabilities in one package such as variable spectral and temporal resolution, no moving parts (other than the micro-mirrors) and vibration tolerance. Two approaches to for 2D HTS systems have been investigated in this LDRD. The first approach involves dispersing the incident light, encoding the dispersed light then recombining the light. This method is referred to as spectral encoding. The other method encodes the incident light then disperses the encoded light. The second technique is called spatial encoding. After creating optical designs for both methods the spatial encoding method was selected as the method that would be implemented because the optical design was less costly to implement.

Abstract not provided.

The design and on-going fabrication of an opto-electro-mechanical microsystem that acts as a four-function optical fiber switch will be presented. The four functions of the 2×2 optical switch include 1) Normal mode, where channel A and channel B pass light straight through, 2) Loopback mode, where light originating in channel A is detected in the B leg, 3) Monitor A mode, where a probe pulse is inserted into channel B and any reflections are detected in the A leg, and 4) Monitor B mode, the compliment of 3) above. The Monitor A and Monitor B modes allow the microsystem to operate as an Optical Time Domain Reflectometer (OTDR). High spatial frequency gratings etched in fused silica configure the light beams through free-space substrate-mode propagation. The design for an OTDR-mode transmission grating that normally passes light from an incidence angle of 45 degrees within the silica substrate as well as passes light from a normal incidence straight through the silica will be discussed. A miniature commercial drive motor, positioned with LIGA alignment plates, rotates the optical grating disk into one of the four implemented function positions. The impact of required tolerances and packaging limitations on the optics, LIGA alignment plates, and the complete microsystem will be presented.

Abstract not provided.

The authors describe the microfabrication of a multi-level diffractive optical element (DOE) onto a micro-electromechanical system (MEMS) as a key element in an integrated compact optical-MEMS laser scanner. The DOE is a four-level off-axis microlens fabricated onto a movable polysilicon shuttle. The microlens is patterned by electron beam lithography and etched by reactive ion beam etching. The DOE was fabricated on two generations of MEMS components. The first generation design uses a shuttle suspended on springs and displaced by a linear rack. The second generation design uses a shuttle guided by roller bearings and driven by a single reciprocating gear. Both the linear rack and the reciprocating gear are driven by a microengine assembly. The compact design is based on mounting the MEMS module and a vertical cavity surface emitting laser (VCSEL) onto a fused silica substrate that contains the rest of the optical system. The estimated scan range of the system is {+-}4{degree} with a spot size of 0.5 mm.