Publications

Abstract not provided.

Ultraviolet (UV) laser-triggered gas switching using laser beams at 266 nm has greatly improved the simultaneity of many large multimodule accelerators. This UV beam however cannot be transmitted significant distances through water or oil. Since the switches in these accelerators are typically submerged in water or oil, the laser beams are often conveyed to the switches through gas-filled "laser crossover tubes."These crossover tubes are difficult to field grade properly and are subject to frequent mechanical and electrical failures in the pulse-power environment. We have demonstrated that a 4.6-MV multistage gas switch insulated with SF6 can be triggered with a jitter of less than 10 ns using 110-mJ pulses of a green (532-nm) laser beam that has been transported through 67 cm of 1-MΩcm water on its way to the switch. These results may allow elimination of the laser crossover tubes in future accelerators. © 2007 IEEE.

Focused Beams from high-power lasers have been used to command trigger gas switches in pulse power accelerators for more than two decades. This Laboratory-Directed Research and Development project was aimed at determining whether high power lasers could also command trigger water switches on high-power accelerators. In initial work, we determined that focused light from three harmonics of a small pulsed Nd:YAG laser at 1064 nm, 532 nm, and 355 nm could be used to form breakdown arcs in water, with the lowest breakdown thresholds of 110 J/cm{sup 2} or 14 GW/cm{sup 2} at 532 nm in the green. In laboratory-scale laser triggering experiments with a 170-kV pulse-charged water switch with a 3-mm anode-cathode gap, we demonstrated that {approx}90 mJ of green laser energy could trigger the gap with a 1-{sigma} jitter of less than 2ns, a factor of 10 improvement over the jitter of the switch in its self breaking mode. In the laboratory-scale experiments we developed optical techniques utilizing polarization rotation of a probe laser beam to measure current in switch channels and electric field enhancements near streamer heads. In the final year of the project, we constructed a pulse-power facility to allow us to test laser triggering of water switches from 0.6- MV to 2.0 MV. Triggering experiments on this facility using an axicon lens for focusing the laser and a switch with a 740 kV self-break voltage produced consistent laser triggering with a {+-} 16-ns 1-{sigma} jitter, a significant improvement over the {+-} 24-ns jitter in the self-breaking mode.

We report on the successful attempts to trigger high voltage pressurized gas switches by utilizing beam transport through 1 MO-cm deionized water. The wavelength of the laser radiation was 532 nm. We have investigated Nd: YAG laser triggering of a 6 MV, SF6 insulated gas switch for a range of laser and switch parameters. Laser wavelength of 532 nm with nominal pulse lengths of 10 ns full width half maximum (FWHM) were used to trigger the switch. The laser beam was transported through 67 cm-long cell of 1 MO-cm deionized water constructed with anti reflection UV grade fused silica windows. The laser beam was then focused to form a breakdown arc in the gas between switch electrodes. Less than 10 ns jitter in the operation of the switch was obtained for laser pulse energies of between 80-110 mJ. Breakdown arcs more than 35 mm-long were produced by using a 70 cm focusing optic.