Astra, deployed in 2018, was the first petascale supercomputer to utilize processors based on the ARM instruction set. The system was also the first under Sandia's Vanguard program which seeks to provide an evaluation vehicle for novel technologies that with refinement could be utilized in demanding, large-scale HPC environments. In addition to ARM, several other important first-of-a-kind developments were used in the machine, including new approaches to cooling the datacenter and machine. This article documents our experiences building a power measurement and control infrastructure for Astra. While this is often beyond the control of users today, the accurate measurement, cataloging, and evaluation of power, as our experiences show, is critical to the successful deployment of a large-scale platform. While such systems exist in part for other architectures, Astra required new development to support the novel Marvell ThunderX2 processor used in compute nodes. In addition to documenting the measurement of power during system bring up and for subsequent on-going routine use, we present results associated with controlling the power usage of the processor, an area which is becoming of progressively greater interest as data centers and supercomputing sites look to improve compute/energy efficiency and find additional sources for full system optimization.
Astra, deployed in 2018, was the first petascale supercomputer to utilize processors based on the ARM instruction set. The system was also the first under Sandia's Vanguard program which seeks to provide an evaluation vehicle for novel technologies that with refinement could be utilized in demanding, large-scale HPC environments. In addition to ARM, several other important first-of-a-kind developments were used in the machine, including new approaches to cooling the datacenter and machine. Here we document our experiences building a power measurement and control infrastructure for Astra. While this is often beyond the control of users today, the accurate measurement, cataloging, and evaluation of power, as our experiences show, is critical to the successful deployment of a large-scale platform. While such systems exist in part for other architectures, Astra required new development to support the novel Marvell ThunderX2 processor used in compute nodes. In addition to documenting the measurement of power during system bring up and for subsequent on-going routine use, we present results associated with controlling the power usage of the processor, an area which is becoming of progressively greater interest as data centers and supercomputing sites look to improve compute/energy efficiency and find additional sources for full system optimization.
Remote Direct Memory Access (RDMA) capabilities have been provided by high-end networks for many years, but the network environments surrounding RDMA are evolving. RDMA performance has historically relied on using strict ordering guarantees to determine when data transfers complete, but modern adaptively-routed networks no longer provide those guarantees. RDMA also exposes low-level details about memory buffers: either all clients are required to coordinate access using a single shared buffer, or exclusive resources must be allocatable per-client for an unbounded amount of time. This makes RDMA unattractive for use in many-to-one communication models such as those found in public internet client-server situations.Remote Virtual Memory Access (RVMA) is a novel approach to data transfer which adapts and builds upon RDMA to provide better usability, resource management, and fault tolerance. RVMA provides a lightweight completion notification mechanism which addresses RDMA performance penalties imposed by adaptively-routed networks, enabling high-performance data transfer regardless of message ordering. RVMA also provides receiver-side resource management, abstracting away previously-exposed details from the sender-side and removing the RDMA requirement for exclusive/coordinated resources. RVMA requires only small hardware modifications from current designs, provides performance comparable or superior to traditional RDMA networks, and offers many new features.In this paper, we describe RVMA's receiver-managed resource approach and how it enables a variety of new data-transfer approaches on high-end networks. In particular, we demonstrate how an RVMA NIC could implement the first hardware-based fault tolerant RDMA-like solution. We present the design and validation of an RVMA simulation model in a popular simulation suite and use it to evaluate the advantages of RVMA at large scale. In addition to support for adaptive routing and easy programmability, RVMA can outperform RDMA on a 3D sweep application by 4.4X.
This paper explores key differences of MPI match lists for several important United States Department of Energy (DOE) applications and proxy applications. This understanding is critical in determining the most promising hardware matching design for any given high-speed network. The results of MPI match list studies for the major open-source MPI implementations, MPICH and Open MPI, are presented, and we modify an MPI simulator, LogGOPSim, to provide match list statistics. These results are discussed in the context of several different potential design approaches to MPI matching–capable hardware. The data illustrate the requirements for different hardware designs in terms of performance and memory capacity. This paper's contributions are the collection and analysis of data to help inform hardware designers of common MPI requirements and highlight the difficulties in determining these requirements by only examining a single MPI implementation.
The high performance computing industry is undergoing a period of substantial change. Not least because of fabrication and lithographic challenges in the manufacturing of next-generation processors. As such challenges mount, the industry is looking to generate higher performance from additional functionality in the micro-architecture space as well as a greater emphasis on efficiency in the design of networkon-chip resources and memory subsystems. Such variation in design opens opportunities for new entrants in the data center and server markets where varying compute-to-memory ratios can present end users with more efficient node designs for particular workloads. In this paper we compare the recently released Marvell ThunderX2 Arm processor - arguably the first high-performance computing capable Arm design available in the marketplace. We perform a set of micro-benchmarking and mini-application evaluation on the ThunderX2 comparing it with Intel's Haswell and Skylake Xeon server parts commonly used in contemporary HPC designs. Our findings show that no one processor performs the best across all benchmarks, but that the ThunderX2 excels in areas demanding high memory bandwidth due to the provisioning of more memory channels in its design. We conclude that the ThunderX2 is a serious contender in the HPC server segment and has the potential to offer supercomputing sites with a viable high-performance alternative to existing designs from established industry players.
The MPI multithreading model has been historically difficult to optimize; the interface that it provides for threads was designed as a process-level interface. This model has led to implementations that treat function calls as critical regions and protect them with locks to avoid race conditions. We hypothesize that an interface designed specifically for threads can provide superior performance than current approaches and even outperform single-threaded MPI. In this paper, we describe a design for partitioned communication in MPI that we call finepoints. First, we assess the existing communication models for MPI two-sided communication and then introduce finepoints as a hybrid of MPI models that has the best features of each existing MPI communication model. In addition, “partitioned communication” created with finepoints leverages new network hardware features that cannot be exploited with current MPI point-to-point semantics, making this new approach both innovative and useful both now and in the future. To demonstrate the validity of our hypothesis, we implement a finepoints library and show improvements against a state-of-the-art multithreaded optimized Open MPI implementation on a Cray XC40 with an Aries network. Our experiments demonstrate up to a 12 × reduction in wait time for completion of send operations. This new model is shown working on a nuclear reactor physics neutron-transport proxy-application, providing up to 26.1% improvement in communication time and up to 4.8% improvement in runtime over the best performing MPI communication mode, single-threaded MPI.
The performance critical path for MPI implementations relies on fast receive side operation, which in turn requires fast list traversal. The performance of list traversal is dependent on data-locality; whether the data is currently contained in a close-to-core cache due to its temporal locality or if its spacial locality allows for predictable pre-fetching. In this paper, we explore the effects of data locality on the MPI matching problem by examining both forms of locality. First, we explore spacial locality, by combining multiple entries into a single linked list element, we can control and modify this form of locality. Secondly, we explore temporal locality by utilizing a new technique called “hot caching”, a process that creates a thread to periodically access certain data, increasing its temporal locality. In this paper, we show that by increasing data locality, we can improve MPI performance on a variety of architectures up to 4x for micro-benchmarks and up to 2x for an application.
Large-scale HPC systems increasingly incorporate sophisticated power management control mechanisms. While these mechanisms are potentially useful for performing energy and/or power-aware job scheduling and resource management (EPA JSRM), greater understanding of their operation and performance impact on real-world applications is required before they can be applied effectively in practice. In this paper, we compare static p-state control to static node-level power cap control on a Cray XC system. Empirical experiments are performed to evaluate node-to-node performance and power usage variability for the two mechanisms. We find that static p-state control produces more predictable and higher performance characteristics than static node-level power cap control at a given power level. However, this performance benefit is at the cost of less predictable power usage. Static node-level power cap control produces predictable power usage but with more variable performance characteristics. Our results are not intended to show that one mechanism is better than the other. Rather, our results demonstrate that the mechanisms are complementary to one another and highlight their potential for combined use in achieving effective EPA JSRM solutions.
Advanced power measurement capabilities are becoming available on large scale High Performance Computing (HPC) deployments. There exist several approaches to providing power measurements today, primarily through in-band (e.g. RAPL) and out-of-band measurements (e.g. power meters). Both types of measurement can be augmented with application-level profiling, however it can be difficult to assess the type and detail of measurement needed to obtain insight from the application power profile. This paper presents a taxonomy for classifying power profiling techniques on modern HPC platforms. Three HPC mini-applications are analyzed across three production HPC systems to examine the level of detail, scope, and complexity of these power profiles. We demonstrate that a combination of out-of-band measurement with in-band application region profiling can provide an accurate, detailed view of power usage without introducing overhead. This work also provides a set of recommendations for how to best profile HPC workloads.
Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager.
Exascale networks are expected to comprise a significant part of the total monetary cost and 10-20% of the power budget allocated to exascale systems. Yet, our understanding of current and emerging workloads on these networks is limited. Left ignored, this knowledge gap likely will translate into missed opportunities for (1) improved application performance and (2) decreased power and monetary costs in next generation systems. This work targets a detailed understanding and analysis of the performance and utilization of the dragonfly network topology. Using the Structural Simulation Toolkit (SST) and a range of relevant workloads on a dragonfly topology of 110,592 nodes, we examine network design tradeoffs amongst execution time, power, bandwidth, and the number of global links. Our simulations report stalled, active and idle time on a per-port level of the fabric, in order to provide a detailed picture of future networks. The results of this work show potential savings of 3-10% of the exascale power budget and provide valuable insights to researchers looking for new opportunities to improve performance and increase power efficiency of next generation HPC systems.
Power API - the result of collaboration among national laboratories, universities, and major vendors - provides a range of standardized power management functions, from application-level control and measurement to facility-level accounting, including real-time and historical statistics gathering. Support is already available for Intel and AMD CPUs and standalone measurement devices.
Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area [13, 3, 5, 10, 4, 21, 19, 16, 7, 17, 20, 18, 11, 1, 6, 14, 12]. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager.
Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area [13, 3, 5, 10, 4, 21, 19, 16, 7, 17, 20, 18, 11, 1, 6, 14, 12]. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager.
Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area [131, 3, 5, 11), 4, a, B, Ili, 7, T71,, a 11 11, 1, 6, IA, ]112]. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager. KC
Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area [13, 3, 5, 10, 4, 21, 19, 16, 7, 17, 20, 18, 11, 1, 6, 14, 12]. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager.
This report documents thirteen of Sandia's contributions to the Computational Systems and Software Environment (CSSE) within the Advanced Simulation and Computing (ASC) program between fiscal years 2009 and 2012. It describes their impact on ASC applications. Most contributions are implemented in lower software levels allowing for application improvement without source code changes. Improvements are identified in such areas as reduced run time, characterizing power usage, and Input/Output (I/O). Other experiments are more forward looking, demonstrating potential bottlenecks using mini-application versions of the legacy codes and simulating their network activity on Exascale-class hardware. The purpose of this report is to prove that the team has completed milestone 4467-Demonstration of a Legacy Application's Path to Exascale. Cielo is expected to be the last capability system on which existing ASC codes can run without significant modifications. This assertion will be tested to determine where the breaking point is for an existing highly scalable application. The goal is to stretch the performance boundaries of the application by applying recent CSSE RD in areas such as resilience, power, I/O, visualization services, SMARTMAP, lightweight LWKs, virtualization, simulation, and feedback loops. Dedicated system time reservations and/or CCC allocations will be used to quantify the impact of system-level changes to extend the life and performance of the ASC code base. Finally, a simulation of anticipated exascale-class hardware will be performed using SST to supplement the calculations. Determine where the breaking point is for an existing highly scalable application: Chapter 15 presented the CSSE work that sought to identify the breaking point in two ASC legacy applications-Charon and CTH. Their mini-app versions were also employed to complete the task. There is no single breaking point as more than one issue was found with the two codes. The results were that applications can expect to encounter performance issues related to the computing environment, system software, and algorithms. Careful profiling of runtime performance will be needed to identify the source of an issue, in strong combination with knowledge of system software and application source code.
The two primary objectives of this LDRD project were to create a lightweight kernel (LWK) operating system(OS) designed to take maximum advantage of multi-core processors, and to leverage the virtualization capabilities in modern multi-core processors to create a more flexible and adaptable LWK environment. The most significant technical accomplishments of this project were the development of the Kitten lightweight kernel, the co-development of the SMARTMAP intra-node memory mapping technique, and the development and demonstration of a scalable virtualization environment for HPC. Each of these topics is presented in this report by the inclusion of a published or submitted research paper. The results of this project are being leveraged by several ongoing and new research projects.
Shared libraries have become ubiquitous and are used to achieve great resource efficiencies on many platforms. The same properties that enable efficiencies on time-shared computers and convenience on small clusters prove to be great obstacles to scalability on large clusters and High Performance Computing platforms. In addition, Light Weight operating systems such as Catamount have historically not supported the use of shared libraries specifically because they hinder scalability. In this report we will outline the methods of supporting shared libraries on High Performance Computing platforms using Light Weight kernels that we investigated. The considerations necessary to evaluate utility in this area are many and sometimes conflicting. While our initial path forward has been determined based on this evaluation we consider this effort ongoing and remain prepared to re-evaluate any technology that might provide a scalable solution. This report is an evaluation of a range of possible methods of supporting dynamically linked executables on capability class1 High Performance Computing platforms. Efforts are ongoing and extensive testing at scale is necessary to evaluate performance. While performance is a critical driving factor, supporting whatever method is used in a production environment is an equally important and challenging task.
Palacios and Kitten are new open source tools that enable applications, whether ported or not, to achieve scalable high performance on large machines. They provide a thin layer over the hardware to support both full-featured virtualized environments and native code bases. Kitten is an OS under development at Sandia that implements a lightweight kernel architecture to provide predictable behavior and increased flexibility on large machines, while also providing Linux binary compatibility. Palacios is a VMM that is under development at Northwestern University and the University of New Mexico. Palacios, which can be embedded into Kitten and other OSes, supports existing, unmodified applications and operating systems by using virtualization that leverages hardware technologies. We describe the design and implementation of both Kitten and Palacios. Our benchmarks show that they provide near native, scalable performance. Palacios and Kitten provide an incremental path to using supercomputer resources that is not performance-compromised.
This report summarizes our investigations into multi-core processors and programming models for parallel scientific applications. The motivation for this study was to better understand the landscape of multi-core hardware, future trends, and the implications on system software for capability supercomputers. The results of this study are being used as input into the design of a new open-source light-weight kernel operating system being targeted at future capability supercomputers made up of multi-core processors. A goal of this effort is to create an agile system that is able to adapt to and efficiently support whatever multi-core hardware and programming models gain acceptance by the community.
Partitioned global address space (PGAS) programming models have been identified as one of the few viable approaches for dealing with emerging many-core systems. These models tend to generate many small messages, which requires specific support from the network interface hardware to enable efficient execution. In the past, Cray included E-registers on the Cray T3E to support the SHMEM API; however, with the advent of multi-core processors, the balance of computation to communication capabilities has shifted toward computation. This paper explores the message rates that are achievable with multi-core processors and simplified PGAS support on a more conventional network interface. For message rate tests, we find that simple network interface hardware is more than sufficient. We also find that even typical data distributions, such as cyclic or block-cyclic, do not need specialized hardware support. Finally, we assess the impact of such support on the well known RandomAccess benchmark. (c) 2007 ACM.