Improved hybrid photovoltaic device performance through oxide engineering
Abstract not provided.
Publications
Determination of Band Alignment in Hybrid Photovoltaics
Abstract not provided.
Interfacial Electronic Properties in Oxide-Polymer Nanocomposites
Abstract not provided.
Photovoltage improvement in hybrid photovoltaic devices by engineering bulk and interfacial oxide properties
Abstract not provided.
Performance of hybrid bulk heterojunction photovoltaics using ZnO nanoparticles
Abstract not provided.
Probing the effect of electron acceptor structure and morphology on charge separation in ZnO/P3HT hybrid photovoltaics using steady-state transient photoinduced absorption
Hybrid cells based on ZnO/P3HT heterojunctions have the advantage of better device stability, but suffer poor photovoltaic performance compared to all-organic cells which use PCBM as the electron acceptor. The photovoltaic effect in these hybrid systems is accomplished via photoinduced charge separation at the interface between the absorbing polymer (P3HT) and the electron acceptor (ZnO). Efforts to improve device performance in these hybrid systems have centered on reducing the required diffusion length for P3HT excitons by creating bulk heterojunctions from either ZnO nanoparticles and P3HT or using ZnO precursors which convert in situ to form ZnO networks inside a polymer matrix. In this study, we use transient photoinduced absorption to access the lifetimes of P3HT polarons and excitons in bulk heterojunctions constructed using P3HT and ZnO nanoparticles or ZnO precursors and compare to those in planar ZnO/P3HT devices. Steady-state photoinduced absorption spectra of ZnO/P3HT show characteristic of sub-bandgap transitions associated with the formation of long-lived (msec lifetimes) radical cations (polarons) in P3HT. Similar short-lived polarons (psec lifetimes) are observed by picosecond transient photoinduced absorption in addition to infrared absorption due to excitons. Here we examine the lifetimes of both the excitons and polarons in ZnO:P3HT bulk heterojunctions using both picosecond and millisecond techniques in an effort to understand the effect of the structure and morphology of the electron acceptor on charge separation. We will also compare the relative photoexitation lifetimes, hence charge separation efficiency, for the planar and bulk heterojunction hybrid system to an all-organic P3HT:PCBM system.
Air-Stable ZnO Precursor for Hybrid Bulk Heterojunction Photovoltaic Device
Abstract not provided.
RF/microwave properties of nanotubes and nanowires : LDRD Project 105876 final report
LDRD Project 105876 was a research project whose primary goal was to discover the currently unknown science underlying the basic linear and nonlinear electrodynamic response of nanotubes and nanowires in a manner that will support future efforts aimed at converting forefront nanoscience into innovative new high-frequency nanodevices. The project involved experimental and theoretical efforts to discover and understand high frequency (MHz through tens of GHz) electrodynamic response properties of nanomaterials, emphasizing nanowires of silicon, zinc oxide, and carbon nanotubes. While there is much research on DC electrical properties of nanowires, electrodynamic characteristics still represent a major new frontier in nanotechnology. We generated world-leading insight into how the low dimensionality of these nanomaterials yields sometimes desirable and sometimes problematic high-frequency properties that are outside standard model electron dynamics. In the cases of silicon nanowires and carbon nanotubes, evidence of strong disorder or glass-like charge dynamics was measured, indicating that these materials still suffer from serious inhomogeneities that limit there high frequency performance. Zinc oxide nanowires were found to obey conventional Drude dynamics. In all cases, a significant practical problem involving large impedance mismatch between the high intrinsic impedance of all nanowires and nanotubes and high-frequency test equipment had to be overcome.
Photovoltage Enhancement of ZnO-P3HT Solar Cells via Inorganic Interface Modification
Abstract not provided.
Conformal Coating of ZnO Nanostructures for Photovoltaic Devices
Abstract not provided.
Absence of elastic clamping in quantitative piezoelectric force microscopy measurements of nanostructures
Applied Physics Letters
We establish that clamping effects, which limit accurate determination of piezoelectric responses in bulk materials and films using piezoelectric force microscopy (PFM), are not present when measuring discrete nanostructures with radii less than five times the tip radius. This conclusion is established by comparing the piezoelectric response in ZnO rods using two electrode configurations: one with the conducting atomic force microscopy tip acting as the top electrode and the other using a uniform metal top electrode. The distributions of piezoelectric coefficients measured with these two types of electrode configurations are the same. Hence, clamping issues do not play a role in the piezoelectric property measurement of nanomaterials using PFM. The role of conduction electrons on the piezoelectric measurement in both cases is also discussed. © 2008 American Institute of Physics.
Direct Measurement of Percolation Probability in Multi-walled Carbon Nanofiber Polymer Nanocomposites
Abstract not provided.
High Frequency Impedance Measurements of Arrays of ZnO Nanorods
Abstract not provided.
Direct measurement of the percolation probability in carbon nanofiber-polyimide nanocomposites
Proposed for publication in the Physical Review Letters.
We present the first experimental measurement of the geometric critical exponent {beta} associated with the percolation probability, the probability a metallic filler belongs to the conducting network, of an electrical composite. The technique employs conducting-tip atomic force microscopy to obtain a conducting areal density, and is demonstrated on polyimide nanocomposites containing different concentrations of carbon nanofibers. We find {beta} {approx} 1 and t (the exponent for bulk conductivity) {approx} 3. These values are consistent with the predictions for the Bethe lattice and larger than the values predicted in the 3D lattice percolation model. Hence, this electrical composite likely belongs to the same universality class as the Bethe lattice. The ability to measure geometric and transport critical exponents on the same material is critical to drawing this conclusion.
Materials Challenges in ZnO/Conjugated Polymer Photovoltaic Devices
Abstract not provided.
Microscopic Electrical Study of Carbon Nanofiber Composites Using Conducting-tip Atomic Force Microscopy
Abstract not provided.
Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells
Solar energy conversion is increasingly being recognized as one of the principal ways to meet future energy needs without causing detrimental environmental impact. Hybrid organic-inorganic solar cells (SCs) are attracting particular interest due to the potential for low cost manufacturing and for use in new applications, such as consumer electronics, architectural integration and light-weight sensors. Key materials advantages of these next generation SCs over conventional semiconductor SCs are in design opportunities--since the different functions of the SCs are carried out by different materials, there are greater materials choices for producing optimized structures. In this project, we explore the hybrid organic-inorganic solar cell system that consists of oxide, primarily ZnO, nanostructures as the electron transporter and poly-(3-hexylthiophene) (P3HT) as the light-absorber and hole transporter. It builds on our capabilities in the solution synthesis of nanostructured semiconducting oxide arrays to this photovoltaic (PV) technology. The three challenges in this hybrid material system for solar applications are (1) achieving inorganic nanostructures with critical spacing that matches the exciton diffusion in the polymer, {approx} 10 nm, (2) infiltrating the polymer completely into the dense nanostructure arrays, and (3) optimizing the interfacial properties to facilitate efficient charge transfer. We have gained an understanding and control over growing oriented ZnO nanorods with sub-50 nm diameters and the required rod-to-rod spacing on various substrates. We have developed novel approaches to infiltrate commercially available P3HT in the narrow spacing between ZnO nanorods. Also, we have begun to explore ways to modify the interfacial properties. In addition, we have established device fabrication and testing capabilities at Sandia for prototype devices. Moreover, the control synthesis of ZnO nanorod arrays lead to the development of an efficient anti-reflection coating for multicrystalline Si solar cells. An important component of this project is the collaboration with Dr. Dave Ginley's group at NREL. The NREL efforts, which are funded by NREL's LDRD program, focus on measuring device performance, external quantum efficiency, photoconductance through highly specialized non-contact time-resolved microwave conductivity (TRMC) measurements, and vapor phase deposition of oxide materials. The close collaboration with NREL enables us to enter this competitive field in such short time. Joint publications and presentations have resulted from this fruitful collaboration. To this date, 5 referred journal papers have resulted from this project, with 2 more in preparation. Several invited talks and numerous contributed presentations in international conferences are also noted. Sandia has gained the reputation of being one of forefront research groups on nanostructured hybrid solar cells.
Photoexcitation dynamics in zinc oxide/polythiophene composites
Abstract not provided.
Next Generation Photovoltaics
Abstract not provided.
Au/Ag and Au/Pd Molecular Contacts to GaAs
J. Vac. Sci. Technol. B
Abstract not provided.
Coupled Piezoelectric and Electrical Properties of Individual ZnO Nanorods
Abstract not provided.
Doping of Highly Oriented ZnO Nanorod Arrays via Aqueous Synthesis
Abstract not provided.
ZnO Nanostructures as Efficient Antireflection Layers in Solar Cells - supporting information
Nano Letters
Abstract not provided.
Materials Challenges in ZnO/Conjugated Polymer Photovoltaic Devices
Abstract not provided.
Tunable arrays of ZnO nanorods and nanoneedles via seed layer and solution chemistry
Crystal Growth and Design
We have systematically studied the effect of pH and 1,3-diaminopropane additive concentration on the morphology of ZnO nanorod and nanoneedle arrays grown in aqueous solution using a variety of seed layers. Increase in the growth solution pH from 6.8 to 13.2 resulted in a near doubling of the growth rate in the [0001] direction possibly due to attractive interaction between the zinc species and the growth surface at high pH, leading to nanorod arrays with reduced faceting and higher aspect ratios. Increases in 1,3-diaminopropane concentration initially enhanced and subsequently inhibited growth of tapered ZnO nanoneedles on seed layers consisting of ZnO nanoparticles, oriented ZnO films, or columnar facets of ZnO microrods. The final nanoneedle dimensions, packing density, and alignment were strongly affected by 1,3-diaminopropane concentration and seed layer type, which can be explained in terms of the relative strength of zinc chelation by 1,3-diaminopropane, the areal density of seeds, and other factors. The precise tuning of ZnO crystalline morphology via the control of seeding and growth conditions may be beneficial to many potential applications that require these aligned crystalline nanostructures. © 2008 American Chemical Society.
Results 1–25 of 68