The freely available "Stopping and Range of Ions in Matter"(SRIM) code is used for evaluating ion beam ranges and depth profiles. We present secondary ion mass spectrometry and Rutherford backscattering experimental results of Si samples implanted with low energy Sb ions to evaluate the accuracy of SRIM simulations. We show that the SRIM simulation systematically overestimates the range by 2-6 nm and this overestimation increases for larger ion implantation energy. For the lowest energy implantation investigated, here we find up to a 25% error between the SRIM simulation and the measured range. The ion straggle shows excellent agreement between simulation and experimental results.
We demonstrate creation of electroforming-free TaOx memristive devices using focused ion beam irradiations to locally define conductive filaments in TaOx films. Electrical characterization shows that these irradiations directly create fully functional memristors without the need for electroforming. Ion beam forming of conductive filaments combined with state-of-the-art nano-patterning presents a CMOS compatible approach to wafer-level fabrication of fully formed operational memristors.
Marseglia, L.; Saha, K.; Ajoy, A.; Schröder, T.; Englund, D.; Jelezko, F.; Walsworth, R.; Pacheco, Jose L.; Perry, Daniel L.; Bielejec, E.S.; Cappellaro, P.
The practical implementation of many quantum technologies relies on the development of robust and bright single photon sources that operate at room temperature. The negatively charged silicon-vacancy (SiV−) color center in diamond is a possible candidate for such a single photon source. However, due to the high refraction index mismatch to air, color centers in diamond typically exhibit low photon out-coupling. An additional shortcoming is due to the random localization of native defects in the diamond sample. Here we demonstrate deterministic implantation of Si ions with high conversion e ciency to single SiV− centers, targeted to fabricated nanowires. The co-localization of single SiV− centers with the nanostructures yields a ten times higher light coupling e ciency than for single SiV− centers in bulk diamond. This enhanced photon out-coupling, together with the intrinsic scalability of the SiV− creation method, enables a new class of devices for integrated photonics and quantum science.
We demonstrate a capability of deterministic doping at the single atom level using a combination of direct write focused ion beam and solid-state ion detectors. The focused ion beam system can position a single ion to within 35 nm of a targeted location and the detection system is sensitive to single low energy heavy ions. This platform can be used to deterministically fabricate single atom devices in materials where the nanostructure and ion detectors can be integrated, including donor-based qubits in Si and color centers in diamond.
Burek, Michael J.; Meuwly, Charles; Evans, Ruffin E.; Bhaskar, Mihir K.; Sipahigil, Alp; Meesala, Srujan; MacHielse, Bartholomeus; Sukachev, Denis D.; Nguyen, Christian T.; Pacheco, Jose L.; Bielejec, Edward S.; Lukin, Mikhail D.; Lončar, Marko
Color centers in diamond provide a promising platform for quantum optics in the solid state, with coherent optical transitions and long-lived electron and nuclear spins. Building upon recent demonstrations of nanophotonic waveguides and optical cavities in single-crystal diamond, we now demonstrate on-chip diamond nanophotonics with a high-efficiency fiber-optical interface achieving >90% power coupling at visible wavelengths. We use this approach to demonstrate a bright source of narrow-band single photons based on a silicon-vacancy color center embedded within a waveguide-coupled diamond photonic crystal cavity. Our fiber-coupled diamond quantum nanophotonic interface results in a high flux (approximately 38 kHz) of coherent single photons (near Fourier limited at <1-GHz bandwidth) into a single-mode fiber, enabling possibilities for realizing quantum networks that interface multiple emitters, both on chip and separated by long distances.
Two different displacement damage experiments were performed on CBRAM cells. In one experiment, conductive bridging random access memory (CBRAM) cells were exposed to 14 MeV neutrons to a total fluence of $3.19 × 1013 n/cm2. In the second test, CBRAM cells were bombarded with 200 keV Si2+ ions. In both the experiments, the high resistance and low resistance states (LRSs) of the cells were observed to converge with increasing particle fluence. After reaching a 14 MeV neutron fluence of $2.93 × 1013 n/cm2, the CBRAM cells became irrecoverably locked into their final resistance state. In situ testing during heavy ion exposure showed a steady decrease in the resistance state of each cell with each successive exposure to the beam. The devices eventually became locked in an LRS.
We demonstrate low energy single ion detection using a co-planar detector fabricated on a diamond substrate and characterized by ion beam induced charge collection. Histograms are taken with low fluence ion pulses illustrating quantized ion detection down to a single ion with a signal-to-noise ratio of approximately 10. We anticipate that this detection technique can serve as a basis to optimize the yield of single color centers in diamond. The ability to count ions into a diamond substrate is expected to reduce the uncertainty in the yield of color center formation by removing Poisson statistics from the implantation process.