Publications

Savage, Mark E.; LeChien, Keith R.; Stygar, William A.; Maenchen, John E.; McDaniel, Dillon H.; Struve, Kenneth W.

Abstract not provided.

Maenchen, John E.

Abstract not provided.

Physical Review Special Topics: Accelerators and Beams

LeChien, Keith R.; Savage, Mark E.; Van Den Avyle, Justin J.; Bliss, David E.; Maenchen, John E.; Maier, Russell A.; Struve, Kenneth W.; Stygar, William A.; Woodworth, Joseph R.

Abstract not provided.

Physics of Plasmas

Rovang, Dean C.; Johnston, Mark D.; Maenchen, John E.; Oliver, Bryan V.; Portillo, Salvador

Abstract not provided.

Physics of Plasmas

Rovang, Dean C.; Bruner, N.; Maenchen, John E.; Oliver, Bryan V.; Portillo, Salvador; Puetz, E.; Rose, D.V.; Welch, D.R.

The immersed- Bz diode is being developed as a high-brightness, flash x-ray radiography source at Sandia National Laboratories. This diode is a foil-less electron-beam diode with a long, thin, needlelike cathode that is inserted into the bore of a solenoid. The solenoidal magnetic field guides the electron beam emitted from the cathode to the anode while maintaining a small beam radius. The electron beam strikes a thin, high-atomic-number anode and produces forward-directed bremsstrahlung. In addition, electron beam heating of the anode produces surface plasmas allowing ion emission. Two different operating regimes for this diode have been identified: a nominal operating regime where the total diode current is characterized as classically bipolar and an anomalous operating regime characterized by a dramatic impedance collapse where the total diode current greatly exceeds the bipolar limit. Data from a comprehensive series of experiments fielded at 4 and 5 MV, where the diode operates in the nominal or stable impedance regime, with beam currents ranging from 20-40 kA on target are presented. In this mode, both the measured diode current and experimental radiation production are consistent with physics based models including two-dimensional particle-in-cell simulations. The analysis indicates that intermediate mass ions (e.g., 12-18 amu) control the nominal impedance evolution rather than expected lighter mass ions such as hydrogen. © 2007 American Institute of Physics.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Woodworth, Joseph R.; Rosenthal, Stephen E.; Lehr, J.M.; Maenchen, John E.; Elizondo, J.; Johnson, D.L.; Corley, J.P.; Hodge, K.C.; Drennan, S.A.; Guthrie, D.W.

The Z Refurbishment project is designed to increase the peak current to the load on Z to ∼26 MA in a 100-ns wide power pulse. This current is achieved by summing the current from 36 independent pulse-power modules. To meet these requirements, we have designed and constructed an SF6-insulated gas switch that can hold off 5.5 MV and conduct a peak current of 600 kA for over a hundred shots. The gas switch is charged by a Marx generator in ∼1 microsecond and transfers about 200-kilojoules of energy and 0.25 Coulombs of charge to a pulse-forming line in a ∼150-ns-wide power pulse peaking at 2.5 TW. The gas switch oonsists of a laser-triggered section holding off 15% of the voltage followed by 25 self-breakdown gaps. The self-breaking gaps are designed to provide multiple breakdown arcs in order to lower the overall inductance of the switch. The gas switch is submerged in transformer oil during operation. In this work, we show how simulation and experiment have worked together, first to verify proper operation of the switch, and then to solve problems with the switch design that arose during testing. © 2005 IEEE.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Douglas, J.; Banister, J.; Corcoran, P.; Goyer, J.; Miller, R.; Morton, D.; Nishimoto, H.; Smith, I.; Corley, J.; Drennan, S.; Guthrie, D.; Hodge, K.; Lehr, J.M.; Maenchen, John E.; Smith, D.; Sears, R.

The ZR refurbishment project [1] at Sandia National Laboratories (SNL) required a set of diverter switches to protect the Marx generators and intermediate storage (IS) capacitors from Marx pre-fire and/or laser triggered output switch (LTS) no-fire. Thirty-six such diverters, one for each Marx-IS set, will need to operate reliably over the full range of Marx charge voltages and LTS anticipated closure times. Operating voltage is up to 6 MV. A self-closing oil switch diverter was selected and design work began in late 2002. The first diverter (Phase I or just P1) was delivered in the summer of 2003 and tested on SNL's Z20 test-bed. Based on test results, operational experience and overall project budgetary concerns, it was decided to re-design the diverter, resulting a simpler, less costly switch. This new self-closing oil switch (Phase II or P2) was fielded at SNL on the Z20 test-bed in late 2004. Both designs include adjustable electrodes to control the closure time. Also incorporated is a mechanical clamp that minimizes or shorts the oil gap until Marx charge is complete. Both diverters feature liquid resistors sized to safely absorb the energy stored in the Marx or IS. This paper describes the design and test results from these diverters. © 2005 IEEE.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Rovang, Dean C.; Van De Valde, D.; Gregerson, D.; Puetz, E.; Bruner, N.; Cooper, G.; Cordova, S.; Droemer, D.; Hahn, K.; Johnston, Mark D.; Maenchen, John E.; McLean, J.; Molina, I.; Oliver, B.; O'Malley, J.; Portillo, Salvador; Welch, D.

Sandia National Laboratories is investigating and developing high-dose, high-brightness flash radiographic sources. The immersed-Bz diode employs large-bore, high-field solenoid magnets to help guide and confine an intense electron beam from a needle-like cathode "immersed" in the axial field of the magnet. The electron beam is focused onto a high-atomic-number target/anode to generate an intense source of bremsstrahlung X-rays. Historically, these diodes have been unable to achieve high dose (> 500 rad @ m) from a small spot (< 3 mm diameter). It is believed that this limitation is due in part to undesirable effects associated with the interaction of the electron beam with plasmas formed at either the anode or the cathode. Previous research concentrated on characterizing the behavior of diodes, which used untreated, room temperature (RT) anodes. Research is now focused on improving the diode performance by modifying the diode behavior by using cryogenic anodes that are coated in-situ with frozen gases. The objective of these cryogenically treated anodes is to control and limit the ion species of the anode plasma formed and hence the species of the counter-streaming ions that can interact with the electron beam. Recent progress in the development, testing and fielding of the cryogenically cooled immersed diodes at Sandia is described. ©2005 IEEE.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Johnson, D.; Bailey, V.; Altes, R.; Corcoran, P.; Smith, I.; Cordova, S.; Hahn, K.; Maenchen, John E.; Molina, I.; Portillo, Salvador; Puetz, E.; Sceiford, Matthew S.; Van De Valde, D.; Rose, D.; Oliver, B.; Welch, D.; Droemer, D.

The six-cell RITS-6 accelerator is an upgrade of the existing RITS-3 accelerator and is next in the sequence of Sandia IVA accelerators built to investigate/validate critical accelerator and radiographic diode issues for scaling to the Radiographic Integrated Test Stand (RITS) (nominally 16 MV, 156 kA, and 70 ns). In the RITS-6 upgrade to RITS-3 the number of cells/cavities, PFLs, laser triggered gas switches and intermediate stores is being doubled. A rebuilt single 61-nF Marx generator will charge the two intermediate storage capacitors. The RITS-3 experiments have demonstrated a MITL configuration matched to the PFL/induction cell impedance and a higher impedance MITL. RITS-6 is designed to utilize the higher impedance MITL providing a 10.5-MV, 123-kA output. The three years of pulsed power performance data from RITS-3 will be summarized and the design improvements being incorporated into RITS-6 will be outlined. The predicted output voltage and current for RITS-6 as a function of diode impedance will be shown. Particle-in-cell simulations of the vacuum power flow from the cell to the load for a range of diode impedances from matched to ∼40 Ohms will be shown and compared with the re-trapped parapotential flow predictions. The status of the component fabrication and system integration will be given. Another potential upgrade under consideration is RITS-62. In this case the RITS-6 Marx, intermediate stores, gas switches, and PFLs would be duplicated and a tee would replace the elbow that now connects a single PFL to a cell thereby allowing two PFLs to be connected to one cell. The output of RITS-62 matched to the cell/PFL impedance would then be 8 MV, 312 kA or 25.6 ohms. The predicted operating curves for RITS-62 with other non-matched MITLs will be shown. The power delivered to a radiographic diode can be maximized by the correct choice of MITL impedance given the cell/PFL and radiographic diode impedances. If the radiated output for a given diode has a stronger than linear voltage dependence this dependence can also be included in the correct choice of MITL impedance. The optimizations and trade-offs will be shown for RITS-6 and RITS-62 for diode impedances characteristic of radiographic diodes. © 2005 IEEE.

Savage, Mark E.; Maenchen, John E.; McDaniel, Dillon H.; Pasik, Michael F.; Pointon, Timothy D.; Owen, Albert C.; Seidel, David B.; Stoltzfus, Brian S.; Struve, Kenneth W.; Warne, Larry K.; Bennett, Lawrence F.; Woodworth, Joseph R.; Bliss, David E.; Clark, Waylon T.; Coats, Rebecca S.; Elizondo-Decanini, Juan M.; LeChien, Keith R.; Harjes, Henry C.; Lehr, J.M.

Abstract not provided.

Oliver, Bryan V.; Maenchen, John E.

Abstract not provided.

Rosenthal, Stephen E.; Pointon, Timothy D.; Warne, Larry K.; Coats, Rebecca S.; Maenchen, John E.

Abstract not provided.

LeChien, Keith R.; Woodworth, Joseph R.; Savage, Mark E.; Bliss, David E.; Lehr, J.M.; Maenchen, John E.; McDaniel, Dillon H.; Struve, Kenneth W.; Stygar, William A.; Van Den Avyle, Justin J.

Abstract not provided.

LeChien, Keith R.; Savage, Mark E.; Bliss, David E.; Maenchen, John E.; Struve, Kenneth W.; Stygar, William A.; Woodworth, Joseph R.

Abstract not provided.

Woodworth, Joseph R.; Bliss, David E.; Savage, Mark E.; LeChien, Keith R.; Maenchen, John E.; Lehr, J.M.

Abstract not provided.

Bliss, David E.; Woodworth, Joseph R.; Clark, Waylon T.; LeChien, Keith R.; Maenchen, John E.; Savage, Mark E.; Sceiford, Matthew S.; Stoltzfus, Brian S.; Struve, Kenneth W.; Stygar, William A.

Abstract not provided.

Oliver, Bryan V.; Maenchen, John E.

Abstract not provided.

Johnston, Mark D.; Oliver, Bryan V.; Portillo, Salvador; Maenchen, John E.; Mehlhorn, Thomas A.

Abstract not provided.

Leckbee, Joshua L.; Oliver, Bryan V.; Maenchen, John E.; Portillo, Salvador; Johnston, Mark D.; Hahn, Kelly D.; Rovang, Dean C.; Molina, I.; Cordova, S.

Abstract not provided.

Rovang, Dean C.; Johnston, Mark D.; Maenchen, John E.; Oliver, Bryan V.; Portillo, Salvador; Madrid, Elizabeth A.

Abstract not provided.

Rovang, Dean C.; Johnston, Mark D.; Maenchen, John E.; Oliver, Bryan V.; Portillo, Salvador; Madrid, Elizabeth A.

Abstract not provided.

Leckbee, Joshua L.; Oliver, Bryan V.; Maenchen, John E.; Portillo, Salvador; Cordova, S.; Molina, I.

Abstract not provided.

Leckbee, Joshua L.; Oliver, Bryan V.; Maenchen, John E.; Portillo, Salvador; Johnston, Mark D.; Hahn, Kelly D.; Rovang, Dean C.; Molina, I.; Cordova, S.

Abstract not provided.

IEEE Transactions on Plasma Science.

Woodworth, Joseph R.; Barnat, Edward V.; Aragon, Ben P.; Bliss, David E.; Maenchen, John E.

Abstract not provided.

Maenchen, John E.; Savage, Mark E.; Struve, Kenneth W.; Woodworth, Joseph R.; Lehr, J.M.; Warne, Larry K.; Bliss, David E.; Jorgenson, Roy E.; LeChien, Keith R.; McKee, George R.; Pasik, Michael F.; Rosenthal, Stephen E.

In October 2005, an intensive three-year Laser Triggered Gas Switch (LTGS) development program was initiated to investigate and solve observed performance and reliability issues with the LTGS for ZR. The approach taken has been one of mission-focused research: to revisit and reassess the design, to establish a fundamental understanding of LTGS operation and failure modes, and to test evolving operational hypotheses. This effort is aimed toward deploying an initial switch for ZR in 2007, on supporting rolling upgrades to ZR as the technology can be developed, and to prepare with scientific understanding for the even higher voltage switches anticipated needed for future high-yield accelerators. The ZR LTGS was identified as a potential area of concern quite early, but since initial assessments performed on a simplified Switch Test Bed (STB) at 5 MV showed 300-shot lifetimes on multiple switch builds, this component was judged acceptable. When the Z{sub 20} engineering module was brought online in October 2003 frequent flashovers of the plastic switch envelope were observed at the increased stresses required to compensate for the programmatically increased ZR load inductance. As of October 2006, there have been 1423 Z{sub 20} shots assessing a variety of LTGS designs. Numerous incremental and fundamental switch design modifications have been investigated. As we continue to investigate the LTGS, the basic science of plastic surface tracking, laser triggering, cascade breakdown, and optics degradation remain high-priority mission-focused research topics. Significant progress has been made and, while the switch does not yet achieve design requirements, we are on the path to develop successively better switches for rolling upgrade improvements to ZR. This report summarizes the work performed in FY 2006 by the large team. A high-level summary is followed by detailed individual topical reports.