Publications

Results 1–25 of 37
Skip to search filters

Enhancing graphene plasmonic device performance via its dielectric environment

Physical Review Applied

Jarzembski, Amun J.; Goldflam, Michael G.; Siddiqui, Aleem M.; Ruiz, Isaac R.; Beechem, Thomas E.

Graphene plasmons provide a compelling avenue toward chip-scale dynamic tuning of infrared light. Dynamic tunability emerges through controlled alterations in the optical properties of the system defining graphene's plasmonic dispersion. Typically, electrostatic induced alterations of the carrier concentration in graphene working in conjunction with mobility have been considered the primary factors dictating plasmonic tunability. We find here that the surrounding dielectric environment also plays a primary role, dictating not just the energy of the graphene plasmon but so too the magnitude of its tuning and spectral width. To arrive at this conclusion, poles in the imaginary component of the reflection coefficient are used to efficiently survey the effect of the surrounding dielectric on the tuning of the graphene plasmon. By investigating several common polar materials, optical phonons (i.e., the Reststrahlen band) of the dielectric substrate are shown to appreciably affect not only the plasmon's spectral location but its tunability, and its resonance shape as well. In particular, tunability is maximized when the resonances are spectrally distant from the Reststrahlen band, whereas sharp resonances (i.e., high-Q) are achievable at the band's edge. These observations both underscore the necessity of viewing the dielectric environment in aggregate when considering the plasmonic response derived from two-dimensional materials and provide heuristics to design dynamically tunable graphene-based infrared devices.

More Details
TYPE Journal Article YEAR 2020
ScopusOSTIDOI

Monolithically fabricated tunable long-wave infrared detectors based on dynamic graphene metasurfaces

Applied Physics Letters

Goldflam, Michael G.; Ruiz, Isaac R.; Howell, S.W.; Tauke-Pedretti, Anna; Anderson, Evan M.; Wendt, J.R.; Finnegan, P.; Hawkins, Samuel D.; Coon, W.; Fortune, Torben R.; Shaner, Eric A.; Kadlec, Clark N.; Olesberg, Jonathon T.; Klem, John F.; Webster, Preston T.; Sinclair, Michael B.; Kim, Jin K.; Peters, D.W.; Beechem, Thomas E.

Here, the design, fabrication, and characterization of an actively tunable long-wave infrared detector, made possible through direct integration of a graphene-enabled metasurface with a conventional type-II superlattice infrared detector, are reported. This structure allows for post-fabrication tuning of the detector spectral response through voltage-induced modification of the carrier density within graphene and, therefore, its plasmonic response. These changes modify the transmittance through the metasurface, which is fabricated monolithically atop the detector, allowing for spectral control of light reaching the detector. Importantly, this structure provides a fabrication-controlled alignment of the metasurface filter to the detector pixel and is entirely solid-state. Using single pixel devices, relative changes in the spectral response exceeding 8% have been realized. These proof-of-concept devices present a path toward solid-state hyperspectral imaging with independent pixel-to-pixel spectral control through a voltage-actuated dynamic response.

More Details
TYPE Journal Article YEAR 2020
ScopusOSTIDOI

A metasurface optical modulator using voltage-controlled population of quantum well states

Applied Physics Letters

Sarma, Raktim S.; Campione, Salvatore; Goldflam, Michael G.; Shank, Joshua S.; Noh, Jinhyun; Le, Loan T.; Lange, Michael D.; Ye, Peide D.; Wendt, J.R.; Ruiz, Isaac R.; Howell, Stephen W.; Sinclair, Michael B.; Wanke, Michael W.; Brener, Igal B.

The ability to control the light-matter interaction with an external stimulus is a very active area of research since it creates exciting new opportunities for designing optoelectronic devices. Recently, plasmonic metasurfaces have proven to be suitable candidates for achieving a strong light-matter interaction with various types of optical transitions, including intersubband transitions (ISTs) in semiconductor quantum wells (QWs). For voltage modulation of the light-matter interaction, plasmonic metasurfaces coupled to ISTs offer unique advantages since the parameters determining the strength of the interaction can be independently engineered. In this work, we report a proof-of-concept demonstration of a new approach to voltage-tune the coupling between ISTs in QWs and a plasmonic metasurface. In contrast to previous approaches, the IST strength is here modified via control of the electron populations in QWs located in the near field of the metasurface. By turning on and off the ISTs in the semiconductor QWs, we observe a modulation of the optical response of the IST coupled metasurface due to modulation of the coupled light-matter states. Because of the electrostatic design, our device exhibits an extremely low leakage current of ∼6 pA at a maximum operating bias of +1 V and therefore very low power dissipation. Our approach provides a new direction for designing voltage-tunable metasurface-based optical modulators.

More Details
TYPE Journal Article YEAR 2018
ScopusOSTIDOI

Low dissipation spectral filtering using a field-effect tunable III-V hybrid metasurface

Applied Physics Letters

Sarma, Raktim S.; Campione, Salvatore; Goldflam, Michael G.; Shank, Joshua S.; Noh, Jinhyun; Smith, Sean S.; Ye, Peide D.; Sinclair, Michael B.; Klem, John F.; Wendt, J.R.; Ruiz, Isaac R.; Howell, Stephen W.; Brener, Igal B.

Considering the power constrained scaling of silicon complementary metal-oxide-semiconductor technology, the use of high mobility III-V compound semiconductors such as In0.53Ga0.47As in conjunction with high-κ dielectrics is becoming a promising option for future n-type metal-oxide-semiconductor field-effect-transistors. Development of low dissipation field-effect tunable III-V based photonic devices integrated with high-κ dielectrics is therefore very appealing from a technological perspective. In this work, we present an experimental realization of a monolithically integrable, field-effect-tunable, III-V hybrid metasurface operating at long-wave-infrared spectral bands. Our device relies on strong light-matter coupling between epsilon-near-zero (ENZ) modes of an ultra-thin In0.53Ga0.47As layer and the dipole resonances of a complementary plasmonic metasurface. The tuning mechanism of our device is based on field-effect modulation, where we modulate the coupling between the ENZ mode and the metasurface by modifying the carrier density in the ENZ layer using an external bias voltage. Modulating the bias voltage between ±2 V, we deplete and accumulate carriers in the ENZ layer, which result in spectrally tuning the eigenfrequency of the upper polariton branch at 13 μm by 480 nm and modulating the reflectance by 15%, all with leakage current densities less than 1 μA/cm2. Our wavelength scalable approach demonstrates the possibility of designing on-chip voltage-tunable filters compatible with III-V based focal plane arrays at mid- and long-wave-infrared wavelengths.

More Details
TYPE Journal Article YEAR 2018
ScopusOSTIDOI

Tunable dual-band graphene-based infrared reflectance filter

Optics Express

Goldflam, Michael G.; Ruiz, Isaac R.; Howell, Stephen W.; Wendt, J.R.; Sinclair, Michael B.; Peters, D.W.; Beechem, Thomas E.

We experimentally demonstrated an actively tunable optical filter that controls the amplitude of reflected long-wave-infrared light in two separate spectral regions concurrently. Our device exploits the dependence of the excitation energy of plasmons in a continuous and unpatterned sheet of graphene on the Fermi-level, which can be controlled via conventional electrostatic gating. The filter enables simultaneous modification of two distinct spectral bands whose positions are dictated by the device geometry and graphene plasmon dispersion. Within these bands, the reflected amplitude can be varied by over 15% and resonance positions can be shifted by over 90 cm-1. Electromagnetic simulations verify that tuning arises through coupling of incident light to graphene plasmons by a grating structure. Importantly, the tunable range is determined by a combination of graphene properties, device structure, and the surrounding dielectrics, which dictate the plasmon dispersion. Thus, the underlying design shown here isapplicable across a broad range of infrared frequencies.

More Details
TYPE Journal Article YEAR 2018
ScopusOSTIDOI
Results 1–25 of 37
Results 1–25 of 37