Publications

110 Results
Skip to search filters

Carrier capture and emission by substitutional carbon impurities in GaN vertical diodes

Journal of Applied Physics

Wampler, William R.; Armstrong, Andrew A.; Vizkelethy, Gyorgy V.

A model was developed for the operation of a GaN pn junction vertical diode which includes rate equations for carrier capture and thermally activated emission by substitutional carbon impurities and carrier generation by ionizing radiation. The model was used to simulate the effect of ionizing radiation on the charge state of carbon. These simulations predict that with no applied bias, carbon is negatively charged in the n-doped layer, thereby compensating n-doping as experimentally observed in diodes grown by metal-organic chemical vapor deposition. With reverse bias, carbon remains negative in the depletion region, i.e., compensation persists in the absence of ionization but is neutralized by exposure to ionizing radiation. This increases charge density in the depletion region, decreases the depletion width, and increases the capacitance. The predicted increase in capacitance was experimentally observed using a pulsed 70 keV electron beam as the source of ionization. In additional confirming experiments, the carbon charge-state conversion was accomplished by photoionization using sub-bandgap light or by the capture of holes under forward bias.

More Details

Optical activation and detection of charge transport between individual colour centres in diamond

Nature Electronics

Lozovoi, Artur; Jayakumar, Harishankar; Daw, Damon; Vizkelethy, Gyorgy V.; Bielejec, Edward S.; Doherty, Marcus W.; Flick, Johannes; Meriles, Carlos A.

Understanding the capture of charge carriers by colour centres in semiconductors is important for the development of novel forms of sensing and quantum information processing, but experiments typically involve ensemble measurements, often impacted by defect proximity. Here we show that confocal fluorescence microscopy and magnetic resonance can be used to induce and probe charge transport between individual nitrogen-vacancy centres in diamond at room temperature. In our experiments, a ‘source’ nitrogen vacancy undergoes optically driven cycles of ionization and recombination to produce a stream of photogenerated carriers, one of which is subsequently captured by a ‘target’ nitrogen vacancy several micrometres away. We use a spin-to-charge conversion scheme to encode the spin state of the source colour centre into the charge state of the target, which allows us to set an upper bound to carrier injection from other background defects. We attribute our observations to the action of unscreened Coulomb potentials producing giant carrier capture cross-sections, orders of magnitude greater than those measured in ensembles.

More Details

Identification of localized radiation damage in power MOSFETs using EBIC imaging

Applied Physics Letters

Ashby, David; Garland, Diana; Esposito, Madeline G.; Vizkelethy, Gyorgy V.; Marinella, Matthew J.; McLain, Michael L.; Llinás, J.P.; Talin, A.A.

The rapidly increasing use of electronics in high-radiation environments and the continued evolution in transistor architectures and materials demand improved methods to characterize the potential damaging effects of radiation on device performance. Here, electron-beam-induced current is used to map hot-carrier transport in model metal-oxide semiconductor field-effect transistors irradiated with a 300 KeV focused He+ beam as a localized line spanning across the gate and bulk Si. By correlating the damage to the electronic properties and combining these results with simulations, the contribution of spatially localized radiation damage on the device characteristics is obtained. This identified damage, caused by the He+ beam, is attributed to localized interfacial Pb centers and delocalized positive fixed-charges, as surmised from simulations. Comprehension of the long-term interaction and mobility of radiation-induced damage are key for future design of rad-hard devices.

More Details

Investigating Heavy-Ion Effects on 14-nm Process FinFETs: Displacement Damage Versus Total Ionizing Dose

IEEE Transactions on Nuclear Science

Esposito, Madeline G.; Manuel, Jack E.; Privat, Aymeric; Xiao, T.P.; Garland, Diana; Bielejec, Edward S.; Vizkelethy, Gyorgy V.; Dickerson, Jeramy R.; Brunhaver, John S.; Talin, A.A.; Ashby, David; King, Michael P.; Barnaby, Hugh; McLain, Michael L.; Marinella, Matthew J.

Bulk 14-nm FinFET technology was irradiated in a heavy-ion environment (42-MeV Si ions) to study the possibility of displacement damage (DD) in scaled technology devices, resulting in drive current degradation with increased cumulative fluence. These devices were also exposed to an electron beam, proton beam, and cobalt-60 source (gamma radiation) to further elucidate the physics of the device response. Annealing measurements show minimal to no 'rebound' in the ON-state current back to its initial high value; however, the OFF-state current 'rebound' was significant for gamma radiation environments. Low-temperature experiments of the heavy-ion-irradiated devices reveal increased defect concentration as the result for mobility degradation with increased fluence. Furthermore, the subthreshold slope (SS) temperature dependence uncovers a possible mechanism of increased defect bulk traps contributing to tunneling at low temperatures. Simulation work in Silvaco technology computer-aided design (TCAD) suggests that the increased OFF-state current is a total ionizing dose (TID) effect due to oxide traps in the shallow trench isolation (STI). The significant SS elongation and ON-state current degradation could only be produced when bulk traps in the channel were added. Heavy-ion irradiation on bulk 14-nm FinFETs was found to be a combination of TID and DD effects.

More Details

Heavy-Ion-Induced Displacement Damage Effects in Magnetic Tunnel Junctions with Perpendicular Anisotropy

IEEE Transactions on Nuclear Science

Xiao, T.P.; Bennett, Christopher H.; Mancoff, Frederick B.; Manuel, Jack E.; Hughart, David R.; Jacobs-Gedrim, Robin B.; Bielejec, Edward S.; Vizkelethy, Gyorgy V.; Sun, Jijun; Aggarwal, Sanjeev; Arghavani, Reza A.; Marinella, Matthew J.

We evaluate the resilience of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy (PMA) to displacement damage induced by heavy-ion irradiation. MTJs were exposed to 3-MeV Ta2+ ions at different levels of ion beam fluence spanning five orders of magnitude. The devices remained insensitive to beam fluences up to $10^{11}$ ions/cm2, beyond which a gradual degradation in the device magnetoresistance, coercive magnetic field, and spin-transfer-torque (STT) switching voltage were observed, ending with a complete loss of magnetoresistance at very high levels of displacement damage (>0.035 displacements per atom). The loss of magnetoresistance is attributed to structural damage at the MgO interfaces, which allows electrons to scatter among the propagating modes within the tunnel barrier and reduces the net spin polarization. Ion-induced damage to the interface also reduces the PMA. This study clarifies the displacement damage thresholds that lead to significant irreversible changes in the characteristics of STT magnetic random access memory (STT-MRAM) and elucidates the physical mechanisms underlying the deterioration in device properties.

More Details

Optimization of target lifetime for production of 14 MeV neutrons

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

Wampler, W.R.; Doyle, B.L.; Snow, C.S.; Vizkelethy, Gyorgy V.; Jasica, M.J.

Two methods are examined for extending the life of tritium targets for production of 14 MeV neutrons by the 3H(2H,n)4He nuclear reaction. With thick film targets the neutron production rate decreases with time due to isotope exchange of tritium in the film with implanted deuterium. In this case, the target life is maximized by operating the target at elevated temperature where the implanted deuterium mixes by thermal diffusion throughout the entire thickness of the film. The number of neutrons obtained from a target is then proportional to the initial tritium content of the film. A novel thin-film target design was also developed and tested. With these thin-film targets, the incident deuterium is implanted through the tritide into the underlying substrate material. A thin permeation barrier layer between the tritide film and substrate, reduces the rate of tritium loss from the tritide film. Good thin-film target performance was achieved using W and Fe for the barrier and substrate materials respectively. Thin-film targets were fabricated and tested and shown to produce similar number of neutrons as thick-film targets while using only a small fraction of the amount of tritium.

More Details

Photocurrent from single collision 14-MeV neutrons in GaN and GaAs

IEEE Transactions on Nuclear Science

Jasica, Matthew J.; Wampler, William R.; Vizkelethy, Gyorgy V.; Hehr, Brian D.; Bielejec, Edward S.

Accurate predictions of device performance in 14-MeV neutron environments rely upon understanding the recoil cascades that may be produced. Recoils from 14-MeV neutrons impinging on both gallium nitride (GaN) and gallium arsenide (GaAs) devices were modeled and compared to the recoil spectra of devices exposed to 14-MeV neutrons. Recoil spectra were generated using nuclear reaction modeling programs and converted into an ionizing energy loss (IEL) spectrum. We measured the recoil IEL spectra by capturing the photocurrent pulses produced by single neutron interactions with the device. Good agreement, with a factor of two, was found between the model and the experiment under strongly depleted conditions. However, this range of agreement between the model and the experiment decreased significantly when the bias was removed, indicating partial energy deposition due to cascades that escape the active volume of the device not captured by the model. Consistent event rates across multiple detectors confirm the reliability of our neutron recoil detection method.

More Details

14 MeV DT Neutron Test Facility at the Sandia Ion Beam Laboratory

Wampler, William R.; Doyle, Barney L.; Vizkelethy, Gyorgy V.; Bielejec, Edward S.; Snow, Clark S.; Styron, Jedediah D.; Jasica, Matthew J.

This report documents work done at the Sandia Ion Beam Laboratory to develop a capability to produce 14 Me neutrons at levels sufficient for testing radiation effects on electronic materials and components. The work was primarily enabled by a laboratory directed research and development (LDRD) project. The main elements of the work were to optimize target lifetime, test a new thin- film target design concept to reduce tritium usage, design and construct a new target chamber and beamline optimized for high-flux tests, and conduct tests of effects on electronic devices and components. These tasks were all successfully completed. The improvements in target performance and target chamber design have increased the flux and fluence of 14 MV neutrons available at the test location by several orders of magnitude. The outcome of the project is that a new capability for testing radiation-effects on electronic components from 14 MeV neutrons is now available at Sandia National Laboratories. This capability has already been extensively used for many qualification and component evaluation and development tests.

More Details

Training a Neural Network on Analog TaOx ReRAM Devices Irradiated With Heavy Ions: Effects on Classification Accuracy Demonstrated With CrossSim

IEEE Transactions on Nuclear Science

Jacobs-Gedrim, Robin B.; Hughart, David R.; Agarwal, Sapan A.; Vizkelethy, Gyorgy V.; Bielejec, E.S.; Vaandrager, Bastiaan L.; Swanson, Scot E.; Knisely, K.E.; Taggart, J.L.; Barnaby, H.J.; Marinella, M.J.

The image classification accuracy of a TaOx ReRAM-based neuromorphic computing accelerator is evaluated after intentionally inducing a displacement damage up to a fluence of 1014 2.5-MeV Si ions/cm2 on the analog devices that are used to store weights. Results are consistent with a radiation-induced oxygen vacancy production mechanism. When the device is in the high-resistance state during heavy ion radiation, the device resistance, linearity, and accuracy after training are only affected by high fluence levels. The findings in this paper are in accordance with the results of previous studies on TaOx-based digital resistive random access memory. When the device is in the low-resistance state during irradiation, no resistance change was detected, but devices with a 4-kΩ inline resistor did show a reduction in accuracy after training at 1014 2.5-MeV Si ions/cm2. This indicates that changes in resistance can only be somewhat correlated with changes to devices' analog properties. This paper demonstrates that TaOx devices are radiation tolerant not only for high radiation environment digital memory applications but also when operated in an analog mode suitable for neuromorphic computation and training on new data sets.

More Details

Analysis of the IBL and LBNL irradiated PIN and PN diodes

Vizkelethy, Gyorgy V.; Bielejec, Edward S.; Aguirre, Brandon A.

This report is a follow-up to the previous report on the difference between high fluence, high and low flux irradiations. There was a discrepancy in the data for the LBNL irradiated S5821 PIN diodes. There were diodes irradiated in the two batches (high and low flux) with the same flux and fluence for reference (lell ions/cm2/shot and 5, 10, and 20 ions/cm2 total flux). Although these diodes should have the same electrical characteristics their leakage currents were different by a factor of 5-6 (batch 2 was larger). Also, the C-V measurements showed drastically different results. It was speculated that these discrepancies were due to one of the following two reasons: 1. Different times elapsed between radiation and characterization. 2. Different areas were irradiated (roughly half of the diodes were covered during irradiation). To address the first concern, we annealed the devices according to the ASTM standard [1]. The differences remained the same. To determine the irradiated area, we performed large area IBIC scans on several devices. Error! Reference source not found. below shows the IBIC maps of two devices one from each batch. The irradiated areas are approximately the same.

More Details

Stochastic Gain Degradation in III-V Heterojunction Bipolar Transistors Due to Single Particle Displacement Damage

IEEE Transactions on Nuclear Science

Vizkelethy, Gyorgy V.; Bielejec, Edward S.; Aguirre, Brandon A.

As device dimensions decrease, single displacement effects become more important. We measured the gain degradation in III-V heterojunction bipolar transistors due to single particles using a heavy ion microbeam. Two devices with different sizes were irradiated with various ion species ranging from oxygen to gold to study the effect of the irradiation ion mass on gain change. From the single steps in the inverse gain (which is proportional to the number of defects), we calculated cumulative distribution functions to help determine design margins. The displacement process was modeled using the MARLOWE binary collision approximation code. The entire structure of the device was modeled and the defects in the base-emitter junction were counted to be compared with the experimental results. While we found good agreement for the large device, we had to modify our model to reach reasonable agreement for the small device.

More Details

The Determination of Radiation Hardness of Semiconductor Materials and Devices with Ion Beams

Vizkelethy, Gyorgy V.; Vittone, Ettore V.; Pastuovic, Zjelko P.; Siegele, Rainer S.; Jaksic, Milko J.; Grilj, Veljko G.; Skukan, Natko S.; Garcia Lopez, Javier G.; Jimenez Ramos, Carmen J.

lon accelerator based techniques provide unique tools to gain insight into the phenomena underlying the formation of defects induced by energetic particles in semiconductor materials and their effects on the electronic features of the device. In recognition of the potential of these techniques, with the aim of enhancing the understanding of the mechanisms underlying the degradation of the performances of semiconductor devices induced by ionizing radiation, the IAEA established a Research Project, coordinated by the Physics Section (CRP F11016) entitled "Utilization of ion accelerators for studying and modelling of radiation induced defects in semiconductors and insulators" at the end of 2011. The objective of this IAEA Coordinated Research Project (CRP) was to enhance the capabilities of the interested Member States by facilitating their collective efforts to use accelerator-based ion irradiation of electronic materials in conjunction with available advanced characterization techniques to gain a deeper understanding of how different types of radiation influences the electronic properties of materials and devices, leading to an improved radiation hardness. A dynamic and productive research was stimulated by this CRP among collaborating partners, resulting in publications in scientific journals [CRP2016], educational and scientific software packages [W8, Forneris2014], and a number of collaborations among the participating research groups. Two of the most significant outcomes of this project are i) the experimental protocol, which rationalizes the use of the many existing characterization techniques adopted to investigate radiation effects in semiconductor devices and ii) the relevant theoretical approach to interpret the experimental data [Vittone2016 and references therein]. This publication integrates output of research articles published by the partners of the CRP and is aimed to provide an exhaustive description of the experimental protocol, the theoretical model with the relevant limits of application, the data analysis procedure, and the physical observables which can be effectively measured and which can be used for assessment of the radiation hardness of semiconductor devices. The intended audience of this report includes all those professionals and technologists working in ion beam functional analysis of semiconductor materials, solid-state physicists and engineers involved in the design of electronic devices working in radiation harsh environments.

More Details

Nuclear microprobe investigation of the effects of ionization and displacement damage in vertical, high voltage GaN diodes

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

Vizkelethy, Gyorgy V.; King, M.P.; Aktas, O.; Kizilyalli, I.C.; Kaplar, Robert K.

Radiation responses of high-voltage, vertical gallium-nitride (GaN) diodes were investigated using Sandia National Laboratories’ nuclear microprobe. Effects of the ionization and the displacement damage were studied using various ion beams. We found that the devices show avalanche effect for heavy ions operated under bias well below the breakdown voltage. The displacement damage experiments showed a surprising effect for moderate damage: the charge collection efficiency demonstrated an increase instead of a decrease for higher bias voltages.

More Details

Imaging the impact of proton irradiation on edge terminations in vertical GaN PIN diodes

IEEE Electron Device Letters

Collins, K.C.; King, M.P.; Dickerson, Jeramy R.; Vizkelethy, Gyorgy V.; Armstrong, Andrew A.; Fischer, Arthur J.; Allerman, A.A.; Kaplar, Robert K.; Aktas, O.; Kizilyalli, I.C.; Talin, A.A.; Léonard, F.

Devices based on GaN have shown great promise for high power electronics, including their potential use as radiation tolerant components. An important step to realizing high power diodes is the design and implementation of an edge termination tomitigate field crowding, which can lead to premature breakdown. However, little is known about the effects of radiation on edge termination functionality. We experimentally examine the effects of proton irradiation on multiple field ring edge terminations in high power vertical GaN PIN diodes using in operando imaging with electron beam induced current (EBIC). We find that exposure to proton irradiation influences field spreading in the edge termination as well as carrier transport near the anode. By using depth-dependent EBIC measurements of hole diffusion length in homoepitaxial n-GaN we demonstrate that the carrier transport effect is due to a reduction in hole diffusion length following proton irradiation.

More Details

Modeling charge collection efficiency degradation in partially depleted GaAs photodiodes using the 1- and 2-carrier Hecht equations

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

Auden, E.C.; Vizkelethy, Gyorgy V.; Serkland, Darwin K.; Bossert, David B.; Doyle, Barney L.

The Hecht equation can be used to model the nonlinear degradation of charge collection efficiency (CCE) in response to radiation-induced displacement damage in both fully and partially depleted GaAs photodiodes. CCE degradation is measured for laser-generated photocurrent as a function of fluence and bias in Al0.3Ga0.7As/GaAs/Al0.25Ga0.75As p-i-n photodiodes which have been irradiated with 12 MeV C and 7.5 MeV Si ions. CCE is observed to degrade more rapidly with fluence in partially depleted photodiodes than in fully depleted photodiodes. When the intrinsic GaAs layer is fully depleted, the 2-carrier Hecht equation describes CCE degradation as photogenerated electrons and holes recombine at defect sites created by radiation damage in the depletion region. If the GaAs layer is partially depleted, CCE degradation is more appropriately modeled as the sum of the 2-carrier Hecht equation applied to electrons and holes generated within the depletion region and the 1-carrier Hecht equation applied to minority carriers that diffuse from the field-free (non-depleted) region into the depletion region. Enhanced CCE degradation is attributed to holes that recombine within the field-free region of the partially depleted intrinsic GaAs layer before they can diffuse into the depletion region.

More Details

Transient current induced in thin film diamonds by swift heavy ions

Diamond and Related Materials

Sato, Shin i.; Makino, Takahiro; Ohshima, Takeshi; Kamiya, Tomihiro; Kada, Wataru; Hanaizumi, Osamu; Grilj, Veljko; Skukan, Natko; Pomorski, Michal; Vizkelethy, Gyorgy V.

Single crystal diamond is a suitable material for the next generation particle detectors because of the superior electrical properties and the high radiation tolerance. In order to investigate charge transport properties of diamond particle detectors, transient currents generated in diamonds by single swift heavy ions (26 MeV O5 + and 45 MeV Si7 +) are investigated. Two dimensional maps of transient currents by single ion hits are also measured. In the case of 50 μm-thick diamond, both the signal height and the collected charge are reduced by the subsequent ion hits and the charge collection time is extended. These results are thought to be attributable to the polarization effect in diamond and it appears only when the transient current is dominated by hole current. In the case of 6 μm-thick diamond membrane, an “island” structure is found in the 2D map of transient currents. Signals in the islands shows different applied bias dependence from signals in other regions, indicating different crystal and/or metal contact quality. Simulation study of transient currents based on the Shockley-Ramo theorem clarifies that accumulation of space charges changes distribution of electric field in diamond and causes the polarization effect.

More Details

Comparison of Gain Degradation and Deep Level Transient Spectroscopy in pnp Si Bipolar Junction Transistors Irradiated With Different Ion Species

IEEE Transactions on Nuclear Science

Aguirre, Brandon A.; Bielejec, E.; Fleming, R.M.; Vizkelethy, Gyorgy V.; Vaandrager, B.; Campbell, Jonathan C.; Martin, W.J.; King, D.B.

We studied the effect of light ion and heavy ion irradiations on pnp Si BJTs. A mismatch in DLTS deep peak amplitude for devices with same final gain but irradiated with different ion species was observed. Also, different ions cause different gain degradation when the DLTS spectra are matched. Pre-dosed ion-irradiated samples show that ion induced ionization does not account for the differences in DLTS peak height but isochronal annealing studies suggest that light ions produce more VP defects than heavy ions to compensate for the lack of clusters that heavy ions produce. The creation of defect clusters by heavy ions is evident by the higher content of E4 and V2∗ defects compared to light ions.

More Details

The anatomy of the minority carrier - atomic cluster interaction in semiconductors

Doyle, Barney L.; Auden, Elizabeth C.; Bielejec, Edward S.; Abraham, John B.; Vizkelethy, Gyorgy V.

This project was to use light ion beam induced charge (IBIC) to detect damage cascades generated by a single heavy ion, and thereby reveal details of the shape of the cascade and the physics of recombination of carriers that interact with the cluster. Further IBIC measurements using the hardware and software of this project will improve the accuracy of theoretical models used to predict electrical degradation in devices exposed to radiation environments. In addition, future use of light ion IBIC detection of single ion-induced damage could be used to locate single ion implantation sites in quantum computing applications. This project used Sandia's Pelletron and nanoImplanter (nI) to produce heavy ion-induced collision cascades in p-n diodes, simulating cascades made by primary knock-on atoms recoiled by neutrons. Si and Li beams from the nI were used to perform highly focused scans generating IBIC signal maps where regions of lower charge collection efficiency were observed without incurring further damage. The very first use of ion channeled beams for IBIC was explored to maximize ionization, improve contrast and provide very straight line trajectories to improve lateral resolution.

More Details

Fabrication and characterization of a co-planar detector in diamond for low energy single ion implantation

Applied Physics Letters

Abraham, John B.; Aguirre, Brandon A.; Pacheco, Jose L.; Vizkelethy, Gyorgy V.; Bielejec, E.

We demonstrate low energy single ion detection using a co-planar detector fabricated on a diamond substrate and characterized by ion beam induced charge collection. Histograms are taken with low fluence ion pulses illustrating quantized ion detection down to a single ion with a signal-to-noise ratio of approximately 10. We anticipate that this detection technique can serve as a basis to optimize the yield of single color centers in diamond. The ability to count ions into a diamond substrate is expected to reduce the uncertainty in the yield of color center formation by removing Poisson statistics from the implantation process.

More Details

Charge collection efficiency degradation induced by MeV ions in semiconductor devices: Model and experiment

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

Vittone, E.; Pastuovic, Z.; Breese, M.B.H.; Garcia Lopez, J.; Jaksic, M.; Raisanen, J.; Siegele, R.; Simon, A.; Vizkelethy, Gyorgy V.

This paper investigates both theoretically and experimentally the charge collection efficiency (CCE) degradation in silicon diodes induced by energetic ions. Ion Beam Induced Charge (IBIC) measurements carried out on n- and p-type silicon diodes which were previously irradiated with MeV He ions show evidence that the CCE degradation does not only depend on the mass, energy and fluence of the damaging ion, but also depends on the ion probe species and on the polarization state of the device. A general one-dimensional model is derived, which accounts for the ion-induced defect distribution, the ionization profile of the probing ion and the charge induction mechanism. Using the ionizing and non-ionizing energy loss profiles resulting from simulations based on the binary collision approximation and on the electrostatic/transport parameters of the diode under study as input, the model is able to accurately reproduce the experimental CCE degradation curves without introducing any phenomenological additional term or formula. Although limited to low level of damage, the model is quite general, including the displacement damage approach as a special case and can be applied to any semiconductor device. It provides a method to measure the capture coefficients of the radiation induced recombination centres. They can be considered indexes, which can contribute to assessing the relative radiation hardness of semiconductor materials.

More Details

Determination of recombination radius in Si for binary collision approximation codes

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

Vizkelethy, Gyorgy V.; Foiles, Stephen M.

Displacement damage caused by ions or neutrons in microelectronic devices can have significant effect on the performance of these devices. Therefore, it is important to predict not only the displacement damage profile, but also its magnitude precisely. Analytical methods and binary collision approximation codes working with amorphous targets use the concept of displacement energy, the energy that a lattice atom has to receive to create a permanent replacement. It was found that this "displacement energy" is direction dependent; it can range from 12 to 32 eV in silicon. Obviously, this model fails in BCA codes that work with crystalline targets, such as Marlowe. Marlowe does not use displacement energy; instead, it uses lattice binding energy only and then pairs the interstitial atoms with vacancies. Then based on the configuration of the Frenkel pairs it classifies them as close, near, or distant pairs, and considers the distant pairs the permanent replacements. Unfortunately, this separation is an ad hoc assumption, and the results do not agree with molecular dynamics calculations. After irradiation, there is a prompt recombination of interstitials and vacancies if they are nearby, within a recombination radius. In order to implement this recombination radius in Marlowe, we used the comparison of MD and Marlowe calculation in a range of ion energies in single crystal silicon target. The calculations showed that a single recombination radius of ∼7.4 Å in Marlowe for a range of ion energies gives an excellent agreement with MD.

More Details

Sub-Micron Resolution of Localized Ion Beam Induced Charge Reduction in Silicon Detectors Damaged by Heavy Ions

IEEE Transactions on Nuclear Science

Auden, Elizabeth C.; Pacheco, Jose L.; Bielejec, Edward S.; Vizkelethy, Gyorgy V.; Abraham, John B.; Doyle, Barney L.

Displacement damage reduces ion beam induced charge (IBIC) through Shockley-Read-Hall recombination. Closely spaced pulses of 200 keVions focused in a 40 nm beam spot are used to create damage cascades within areas. Damaged areas are detected through contrast in IBIC signals generated with focused ion beams of {200 ions and 60 keV ions. IBIC signal reduction can be resolved over sub-micron regions of a silicon detector damaged by as few as 1000 heavy ions.

More Details

Performance and Breakdown Characteristics of Irradiated Vertical Power GaN P-i-N Diodes

IEEE Transactions on Nuclear Science

King, M.P.; Armstrong, Andrew A.; Dickerson, Jeramy R.; Vizkelethy, Gyorgy V.; Fleming, Robert M.; Campbell, Jonathan C.; Wampler, W.R.; Kizilyalli, I.C.; Bour, D.P.; Aktas, O.; Nie, H.; DIsney, D.; Wierer, J.; Allerman, A.A.; Moseley, M.W.; Leonard, F.; Talin, A.A.; Kaplar, Robert K.

Electrical performance and defect characterization of vertical GaN P-i-N diodes before and after irradiation with 2.5 MeV protons and neutrons is investigated. Devices exhibit increase in specific on-resistance following irradiation with protons and neutrons, indicating displacement damage introduces defects into the p-GaN and n- drift regions of the device that impact on-state device performance. The breakdown voltage of these devices, initially above 1700 V, is observed to decrease only slightly for particle fluence < {10{13}} hbox{cm}-2. The unipolar figure of merit for power devices indicates that while the on-resistance and breakdown voltage degrade with irradiation, vertical GaN P-i-Ns remain superior to the performance of the best available, unirradiated silicon devices and on-par with unirradiated modern SiC-based power devices.

More Details

Outstanding conference paper award 2014 IEEE nuclear and space radiation effects conference

IEEE Transactions on Nuclear Science

Dodds, Nathaniel A.; Dodds, Nathaniel A.; Schwank, James R.; Schwank, James R.; Shaneyfelt, Marty R.; Shaneyfelt, Marty R.; Dodd, Paul E.; Dodd, Paul E.; Doyle, Barney L.; Doyle, Barney L.; Trinczek, M.C.; Trinczek, M.C.; Blackmore, E.W.; Blackmore, E.W.; Rodbell, K.P.; Rodbell, K.P.; Reed, R.A.; Reed, R.A.; Pellish, J.A.; Pellish, J.A.; LaBel, K.A.; LaBel, K.A.; Marshall, P.W.; Marshall, P.W.; Swanson, Scot E.; Swanson, Scot E.; Vizkelethy, Gyorgy V.; Vizkelethy, Gyorgy V.; Van Deusen, Stuart B.; Van Deusen, Stuart B.; Sexton, Frederick W.; Sexton, Frederick W.; Martinez, Marino M.; Martinez, Marino M.

The recipients of the 2014 NSREC Outstanding Conference Paper Award are Nathaniel A. Dodds, James R. Schwank, Marty R. Shaneyfelt, Paul E. Dodd, Barney L. Doyle, Michael Trinczek, Ewart W. Blackmore, Kenneth P. Rodbell, Michael S. Gordon, Robert A. Reed, Jonathan A. Pellish, Kenneth A. LaBel, Paul W. Marshall, Scot E. Swanson, Gyorgy Vizkelethy, Stuart Van Deusen, Frederick W. Sexton, and M. John Martinez, for their paper entitled "Hardness Assurance for Proton Direct Ionization-Induced SEEs Using a High-Energy Proton Beam." For older CMOS technologies, protons could only cause single-event effects (SEEs) through nuclear interactions. Numerous recent studies on 90 nm and newer CMOS technologies have shown that protons can also cause SEEs through direct ionization. Furthermore, this paper develops and demonstrates an accurate and practical method for predicting the error rate caused by proton direct ionization (PDI).

More Details

Hardness assurance for proton direct ionization-induced SEEs using a high-energy proton beam

IEEE Transactions on Nuclear Science

Dodds, N.A.; Schwank, James R.; Shaneyfelt, Marty R.; Dodd, Paul E.; Doyle, Barney L.; Trinczek, M.; Blackmore, E.W.; Rodbell, K.P.; Gordon, M.S.; Reed, R.A.; Pellish, J.A.; LaBel, K.A.; Marshall, P.W.; Swanson, Scot E.; Vizkelethy, Gyorgy V.; Van Deusen, Stuart B.; Sexton, Frederick W.; Martinez, Marino M.

The low-energy proton energy spectra of all shielded space environments have the same shape. This shape is easily reproduced in the laboratory by degrading a high-energy proton beam, producing a high-fidelity test environment. We use this test environment to dramatically simplify rate prediction for proton direct ionization effects, allowing the work to be done at high-energy proton facilities, on encapsulated parts, without knowledge of the IC design, and with little or no computer simulations required. Proton direct ionization (PDI) is predicted to significantly contribute to the total error rate under the conditions investigated. Scaling effects are discussed using data from 65-nm, 45-nm, and 32-nm SOI SRAMs. These data also show that grazing-angle protons will dominate the PDI-induced error rate due to their higher effective LET, so PDI hardness assurance methods must account for angular effects to be conservative. We show that this angular dependence can be exploited to quickly assess whether an IC is susceptible to PDI.

More Details

Mapping of radiation-induced resistance changes and multiple conduction channels in TaOx memristors

IEEE Transactions on Nuclear Science

Hughart, David R.; Pacheco, Jose L.; Lohn, Andrew L.; Mickel, Patrick R.; Bielejec, Edward S.; Vizkelethy, Gyorgy V.; Doyle, Barney L.; Wolfley, Steven L.; Dodd, Paul E.; Shaneyfelt, Marty R.; McLain, Michael L.; Marinella, Matthew J.

The locations of conductive regions in TaOx memristors are spatially mapped using a microbeam and Nanoimplanter by rastering an ion beam across each device while monitoring its resistance. Microbeam irradiation with 800 keV Si ions revealed multiple sensitive regions along the edges of the bottom electrode. The rest of the active device area was found to be insensitive to the ion beam. Nanoimplanter irradiation with 200 keV Si ions demonstrated the ability to more accurately map the size of a sensitive area with a beam spot size of 40 nm by 40 nm. Isolated single spot sensitive regions and a larger sensitive region that extends approximately 300 nm were observed.

More Details

Progress report of Sandia National Laboratories (SNL) contribu- tion to IAEA CRP F11016 on ?Utilization of ion accelerators for studying and modeling of radiation induced defects in semicon- ductors and insulators? 3rd RCM

Vizkelethy, Gyorgy V.

This report presents the results of Sandia National Laboratories’ (SNL) contribution to IAEA CRP F11016 as mostly raw data. The goal of this CRP is to study the effects of radiation on semiconductors and insulators with the emphasis on the effect of displacement damage due to MeV energy ions on the performance of semiconductor detectors and microelectronic devices. SNL is tasked with performing electrical characterization, irradiation, and IBIC, DLTS, C-­V measurements on devices used in the CRP, as well as calculating damage and ionization profiles for modeling.

More Details
110 Results
110 Results