Advanced optically-activated solid-state electrical switch development at Sandia has demonstrated multi-kA/kV switching and the path for scalability to even higher current/power. Realization of this potential requires development of new optical sources/switches based on key Sandia photonic device technologies: vertical-cavity surface-emitting lasers (VCSELs) and photoconductive semiconductor switch (PCSS) devices. The key to increasing the switching capacity of PCSS devices to 5kV/5kA and higher is to distribute the current in multiple parallel line filaments triggered by an array of high-brightness line-shaped illuminators. Commercial mechanically-stacked edge-emitting lasers have been used to trigger multiple filaments, but they are difficult to scale and manufacture with the required uniformity. In VCSEL arrays, adjacent lasers utilize identical semiconductor material and are lithographically patterned to the required dimensions. We have demonstrated multiple-line filament triggering using VCSEL arrays to approximate line generation. These arrays of uncoupled circular-aperture VCSELs have fill factors ranging from 2% to 30%. Using these arrays, we have developed a better understanding of the illumination requirements for stable triggering of multiple-filament PCSS devices. Photoconductive semiconductor switch (PCSS) devices offer advantages of high voltage operation (multi-kV), optical isolation, triggering with laser pulses that cannot occur accidentally in nature, low cost, high speed, small size, and radiation hardness. PCSS devices are candidates for an assortment of potential applications that require multi-kA switching of current. The key to increasing the switching capacity of PCSS devices to 5kV/5kA and higher is to distribute the current in multiple parallel line filaments triggered by an array of high-brightness line-shaped illuminators. Commercial mechanically-stacked edge-emitting lasers have been demonstrated to trigger multiple filaments, but they are difficult to scale and manufacture with the required uniformity. As a promising alternative to multiple discrete edge-emitting lasers, a single wafer of vertical-cavity surface-emitting lasers (VCSELs) can be lithographically patterned to achieve the desired layout of parallel line-shaped emitters, in which adjacent lasers utilize identical semiconductor material and thereby achieve a degree of intrinsic optical uniformity. Under this LDRD project, we have fabricated arrays of uncoupled circular-aperture VCSELs to approximate a line-shaped illumination pattern, achieving optical fill factors ranging from 2% to 30%. We have applied these VCSEL arrays to demonstrate single and dual parallel line-filament triggering of PCSS devices. Moreover, we have developed a better understanding of the illumination requirements for stable triggering of multiple-filament PCSS devices using VCSEL arrays. We have found that reliable triggering of multiple filaments requires matching of the turn-on time of adjacent VCSEL line-shaped-arrays to within approximately 1 ns. Additionally, we discovered that reliable triggering of PCSS devices at low voltages requires more optical power than we obtained with our first generation of VCSEL arrays. A second generation of higher-power VCSEL arrays was designed and fabricated at the end of this LDRD project, and testing with PCSS devices is currently underway (as of September 2008).
We have numerically compared the performance of various designs for the core refractive-index (RI) and rare-earth-dopant distributions of large-mode-area fibers for use in bend-loss-filtered, high-power amplifiers. We first established quantitative targets for the key parameters that determine fiber-amplifier performance, including effective LP01 modal area (Aeff, both straight and coiled), bend sensitivity (for handling and packaging), high-order mode discrimination, mode-field displacement upon coiling, and index contrast (manufacturability). We compared design families based on various power-law and hybrid profiles for the RI and evaluated confined rare-earth doping for hybrid profiles. Step-index fibers with straight-fiber Aeff values > 1000 μm2 exhibit large decreases in Aeff and transverse mode-field displacements upon coiling, in agreement with recent calculations of Hadley et al. [Proc. of SPIE, Vol. 6102, 61021S (2006)] and Fini [Opt. Exp. 14, 69 (2006)]. Triangular-profile fibers substantially mitigate these effects, but suffer from excessive bend sensitivity at Aeff values of interest. Square-law (parabolic) profile fibers are free of modal distortion but are hampered by high bend sensitivity (although to a lesser degree than triangular profiles) and exhibit the largest mode displacements. We find that hybrid (combined power-law) profiles provide some decoupling of these tradeoffs and allow all design goals to be achieved simultaneously. We present optimized fiber designs based on this analysis.
We present a new algorithm for wide-angle propagation through a general class of optical-waveguide structures defined by dielectric interfaces that may be slanted with respect to the direction of propagation. No regularity of the structure shapes is assumed, no coordinate transformations are employed, and the movement of each grid point between propagation steps is arbitrary within modest angular limitations. When used with an appropriate grid-generation algorithm, this method allows the modeling of an extremely wide variety of high-index-contrast waveguide structures, including meanders and tapers, with good phase accuracy and energy conservation.
We report results from Yb-doped fiber amplifiers seeded with two microchip lasers having 0.38-ns and 2.3-ns pulse durations. The shorter duration seed resulted in output pulses with a peak power of > 1.2 MW and pulse energy of 0.67 mJ. Peak power was limited by nonlinear processes that caused breakup and broadening of the pulse envelope as the pump power increased. The 2.3-ns duration seed laser resulted in output pulses with a peak power of >300 kW and pulse energy of > 1.1 mJ. Pulse energies were limited by the onset of stimulated Brillouin scattering and ultimately by internal optical damage (fluences in excess of 400 J/cm 2 were generated). In both experiments, nearly diffraction-limited beam profiles were obtained, with M 2 values of < 1.2. Preliminary results of a pulse-amplification model are in excellent agreement with the experimental results of the amplifiers operating in the low-to-moderate gain-depletion regime.
This report describes the research accomplishments achieved under the LDRD Project ''Leaky-mode VCSELs for photonic logic circuits''. Leaky-mode vertical-cavity surface-emitting lasers (VCSELs) offer new possibilities for integration of microcavity lasers to create optical microsystems. A leaky-mode VCSEL output-couples light laterally, in the plane of the semiconductor wafer, which allows the light to interact with adjacent lasers, modulators, and detectors on the same wafer. The fabrication of leaky-mode VCSELs based on effective index modification was proposed and demonstrated at Sandia in 1999 but was not adequately developed for use in applications. The aim of this LDRD has been to advance the design and fabrication of leaky-mode VCSELs to the point where initial applications can be attempted. In the first and second years of this LDRD we concentrated on overcoming previous difficulties in the epitaxial growth and fabrication of these advanced VCSELs. In the third year, we focused on applications of leaky-mode VCSELs, such as all-optical processing circuits based on gain quenching.
We report a fully integrated high-Q factor micro-ring resonator using silicon nitride/dioxide on a silicon wafer. The micro-ring resonator is critically coupled to a low loss straight waveguide. An intrinsic quality factor of 2.4 x 10{sup 5} has been measured.
Light propagating through a subwavelength aperture can be dramatically increased by etching a grating in the metal around the hole. Moreover, light that would typically broadly diverge when passing through an unpatterned subwavelength hole can be directed into a narrow beam by utilizing a specific pattern around the aperture. While the increased transmission and narrowed angular emission appear to defy far-field diffraction theory, they are consistent with a fortuitous plasmon/photon coupling. In addition, the coupling between photons and surface plasmons affects the emissivity of a surface comprised of such structures. These properties are useful across several strategic areas of interest to Sandia. A controllable emission spectrum could benefit satellite and military application areas. Photolithography and near-field microscopy are natural applications for a system that controls light beyond the diffraction limit in a manner that is easily parallelizable. Over the one year of this LDRD, we have built or modified the numerical tools necessary to model such structures. These numerical codes and the knowledge base for using them appropriately will be available in the future for modeling work on surface plasmons or other optical modeling at Sandia. Using these tools, we have designed and optimized structures for various transmission or emission properties. We demonstrate the ability to design a metallic skin with an emissivity peak at a pre-determined wavelength in the spectrum. We optimize structures for maximum light transmission and show transmitted beams that beat the far-field diffraction limit.
This SAND report is the final report on Sandia's Grand Challenge LDRD Project 27328, 'A Revolution in Lighting -- Building the Science and Technology Base for Ultra-Efficient Solid-state Lighting.' This project, which for brevity we refer to as the SSL GCLDRD, is considered one of Sandia's most successful GCLDRDs. As a result, this report reviews not only technical highlights, but also the genesis of the idea for Solid-state Lighting (SSL), the initiation of the SSL GCLDRD, and the goals, scope, success metrics, and evolution of the SSL GCLDRD over the course of its life. One way in which the SSL GCLDRD was different from other GCLDRDs was that it coincided with a larger effort by the SSL community - primarily industrial companies investing in SSL, but also universities, trade organizations, and other Department of Energy (DOE) national laboratories - to support a national initiative in SSL R&D. Sandia was a major player in publicizing the tremendous energy savings potential of SSL, and in helping to develop, unify and support community consensus for such an initiative. Hence, our activities in this area, discussed in Chapter 6, were substantial: white papers; SSL technology workshops and roadmaps; support for the Optoelectronics Industry Development Association (OIDA), DOE and Senator Bingaman's office; extensive public relations and media activities; and a worldwide SSL community website. Many science and technology advances and breakthroughs were also enabled under this GCLDRD, resulting in: 55 publications; 124 presentations; 10 book chapters and reports; 5 U.S. patent applications including 1 already issued; and 14 patent disclosures not yet applied for. Twenty-six invited talks were given, at prestigious venues such as the American Physical Society Meeting, the Materials Research Society Meeting, the AVS International Symposium, and the Electrochemical Society Meeting. This report contains a summary of these science and technology advances and breakthroughs, with Chapters 1-5 devoted to the five technical task areas: 1 Fundamental Materials Physics; 2 111-Nitride Growth Chemistry and Substrate Physics; 3 111-Nitride MOCVD Reactor Design and In-Situ Monitoring; 4 Advanced Light-Emitting Devices; and 5 Phosphors and Encapsulants. Chapter 7 (Appendix A) contains a listing of publications, presentations, and patents. Finally, the SSL GCLDRD resulted in numerous actual and pending follow-on programs for Sandia, including multiple grants from DOE and the Defense Advanced Research Projects Agency (DARPA), and Cooperative Research and Development Agreements (CRADAs) with SSL companies. Many of these follow-on programs arose out of contacts developed through our External Advisory Committee (EAC). In h s and other ways, the EAC played a very important role. Chapter 8 (Appendix B) contains the full (unedited) text of the EAC reviews that were held periodically during the course of the project.
Finite difference equations are derived for the simulation of dielectric waveguides using an Hz -Ez formulation defined on a nonuniform triangular grid. The resulting equations may be solved as a banded eigenproblem for waveguide structures of arbitrary shape composed of regions of piecewise constant isotropic dielectric, and all transverse fields then computed from the solutions. Benchmark comparisons are presented for problems with analytic solutions, as well as a sample calculation of the propagation loss of a hollow Bragg fiber.
Resonant subwavelength gratings (RSGs) may be used as narrow-band wavelength and angular reflectors. Rigorous coupled wave analysis (RCWA) predicts 100% reflectivity at the resonant frequency of an incident plane wave from an RSG of infinite extent. For devices of finite extent or for devices illuminated with a finite beam, the peak reflectivity drops, coupled with a broadening of the peak. More complex numerical methods are required to model these finite effects. We have modeled finite devices and finite beams with a two-dimensional finite difference Helmholtz equation. The effect of finite grating aperture and finite beam size are investigated. Specific cases considered include Gaussian beam illumination of an infinite grating, Gaussian illumination of a finite grating, and plane wave illumination of an apertured grating. For a wide grating with a finite Gaussian beam, it is found that the reflectivity is an exponential function of the grating width. Likewise, for an apertured grating the reflectivity shows an exponential decay with narrowing aperture size. Results are compared to other methods, including plane wave decomposition of Gaussian beams using RCWA for the case of a finite input beam, and semi-analytical techniques for the case of the apertured grating.
Artificially structured photonic lattice materials are commonly investigated for their unique ability to block and guide light. However, an exciting aspect of photonic lattices which has received relatively little attention is the extremely high refractive index dispersion within the range of frequencies capable of propagating within the photonic lattice material. In fact, it has been proposed that a negative refractive index may be realized with the correct photonic lattice configuration. This report summarizes our investigation, both numerically and experimentally, into the design and performance of such photonic lattice materials intended to optimize the dispersion of refractive index in order to realize new classes of photonic devices.
This report describes a passive, optical component called resonant subwavelength gratings (RSGs), which can be employed as one element in an RSG array. An RSG functions as an extremely narrow wavelength and angular band reflector, or mode selector. Theoretical studies predict that the infinite, laterally-extended RSG can reflect 100% of the resonant light while transmitting the balance of the other wavelengths. Experimental realization of these remarkable predictions has been impacted primarily by fabrication challenges. Even so, we will present large area (1.0mm) RSG reflectivity as high as 100.2%, normalized to deposited gold. Broad use of the RSG will only truly occur in an accessible micro-optical system. This program at Sandia is a normal incidence array configuration of RSGs where each array element resonates with a distinct wavelength to act as a dense array of wavelength- and mode-selective reflectors. Because of the array configuration, RSGs can be matched to an array of pixels, detectors, or chemical/biological cells for integrated optical sensing. Micro-optical system considerations impact the ideal, large area RSG performance by requiring finite extent devices and robust materials for the appropriate wavelength. Theoretical predictions and experimental measurements are presented that demonstrate the component response as a function of decreasing RSG aperture dimension and off-normal input angular incidence.
Selectively oxidized vertical cavity surface emitting lasers (VCSEL) typically operate in multiple transverse optical modes. High power VCSEL operation is desirable for many applications such as optical storage and printing, modulation spectroscopy, bar code scanning, and data communication over single mode optical fiber. The modal discrimination can be augmented by creating a central region of gain surrounded by a region of optical loss. A VCSEL fabricated via hybrid ion implantation and selective oxidation device structure is designed to demonstrate a single mode output of more than 5 mW for 850 nm.
Previously, an effective index optical model was introduced for the analysis of lateral waveguiding effects in vertical-cavity surface-emitting lasers. The authors show that the resultant transverse equation is almost identical to the one typically obtained in the analysis of dielectric waveguide problems, such as a step-index optical fiber. The solution to the transverse equation yields the lateral dependence of the optical field and, as is recognized in this paper, the discrete frequencies of the microcavity modes. As an example, they apply this technique to the analysis of vertical-cavity lasers that contain thin-oxide apertures. The model intuitively explains the experimental data and makes quantitative predictions in good agreement with a highly accurate numerical model.