Publications

41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012

Jonson, Michael; Fahnline, John; Johnson, Erick J.; Barone, Matthew F.; Fontaine, Arnold

Marine hydrokinetic (MHK) devices are currently being considered for the generation of electrical power in marine tidal regions. Turbulence generated in the boundary layers of these channels interacts with a turbine to excite the blades into low-to mid-frequency vibration. Additionally, the self-generated turbulent boundary layer on the turbine blade excites its trailing edge into vibration. Both of these hydrodynamic sources generate radiated noise. Being installed in a marine ecosystem, the noise generated by these MHK devices may affect the fish and marine mammal well-being. Since this MHK technology is relatively new, much of the design practice follows that from conventional horizontal axis wind turbines. In contrast to other underwater turbomachines like conventional merchant ships that have solid blades, wind turbine blades are made of hollow fiberglass composites. This paper systematically investigates the contrast of this design detail on the blade vibration and radiated noise for a particular MHK turbine design. Copyright © 2012 by ASME.

Johnson, Erick J.

Abstract not provided.

Johnson, Erick J.; Barone, Matthew F.

Abstract not provided.

Johnson, Erick J.

Abstract not provided.

Johnson, Erick J.

Abstract not provided.

Barco Mugg, Janet B.; Johnson, Erick J.

Abstract not provided.

Johnson, Erick J.

Abstract not provided.

Johnson, Erick J.; Barone, Matthew F.

Abstract not provided.

Renewable Energy

Roberts, Jesse D.; Johnson, Erick J.; Barco Mugg, Janet B.

Abstract not provided.

Johnson, Erick J.; Barone, Matthew F.

Abstract not provided.

Johnson, Erick J.; Barco Mugg, Janet B.; Roberts, Jesse D.

Increasing interest in marine hydrokinetic (MHK) energy has spurred to significant research on optimal placement of emerging technologies to maximize energy conversion and minimize potential effects on the environment. However, these devices will be deployed as an array in order to reduce the cost of energy and little work has been done to understand the impact these arrays will have on the flow dynamics, sediment-bed transport and benthic habitats and how best to optimize these arrays for both performance and environmental considerations. An "MHK-friendly" routine has been developed and implemented by Sandia National Laboratories (SNL) into the flow, sediment dynamics and water-quality code, SNL-EFDC. This routine has been verified and validated against three separate sets of experimental data. With SNL-EFDC, water quality and array optimization studies can be carried out to optimize an MHK array in a resource and study its effects on the environment. The present study examines the effect streamwise and spanwise spacing has on the array performance. Various hypothetical MHK array configurations are simulated within a trapezoidal river channel. Results show a non-linear increase in array-power efficiency as turbine spacing is increased in each direction, which matches the trends seen experimentally. While the sediment transport routines were not used in these simulations, the flow acceleration seen around the MHK arrays has the potential to significantly affect the sediment transport characteristics and benthic habitat of a resource. Evaluation Only. Created with Aspose.Pdf.Kit. Copyright 2002-2011 Aspose Pty Ltd Evaluation Only. Created with Aspose.Pdf.Kit. Copyright 2002-2011 Aspose Pty Ltd