Publications

Additively manufactured lattice truss structures, often referred to as architected cellular materials, present significant advantages over conventional structures due to their unique characteristics such as high strength-to-weight ratios and surface area-to-volume ratios. These geometrically complex structures, however, come with concomitant challenges for qualification and inspection. In this study, compression testing interrupted with micro-computed tomography inspection was conducted to monitor the evolution of global and local deformation throughout the loading process of 304 L stainless steel octet truss lattice structures. Both two- and three-dimensional image analysis techniques were leveraged to characterize geometric heterogeneities resulting from the laser powder bed fusion manufacturing process as well as track the structure throughout deformation. Variations from model-predicted behavior resulting from these heterogeneities are considered relative to the predicted and actual responses of the structures during compression to better understand, model, and predict the octet truss lattice structure compression response.

Abstract not provided.

Abstract not provided.

Architected structural metamaterials, also known as lattice, truss, or acoustic materials, provide opportunities to produce tailored effective properties that are not achievable in bulk monolithic materials. These topologies are typically designed under the assumption of uniform, isotropic base material properties taken from reference databases and without consideration for sub-optimal as-printed properties or off-nominal dimensional heterogeneities. However, manufacturing imperfections such as surface roughness are present throughout the lattices and their constituent struts create significant variability in mechanical properties and part performance. This study utilized a customized tensile bar with a gauge section consisting of five parallel struts loaded in a stretch (tensile) orientation to examine the impact of manufacturing heterogeneities on quasi-static deformation of the struts, with a focus on ultimate tensile strength and ductility. The customized tensile specimen was designed to prevent damage during handling, despite the sub-millimeter thickness of each strut, and to enable efficient, high-throughput mechanical testing. The strut tensile specimens and reference monolithic tensile bars were manufactured using a direct metal laser sintering (also known as laser powder bed fusion or selective laser melting) process in a precipitation hardened stainless steel alloy, 17-4PH, with minimum feature sizes ranging from 0.5-0.82 mm, comparable to minimum allowable dimensions for the process. Over 70 tensile stress-strain tests were performed revealing that the effective mechanical properties of the struts were highly stochastic, considerably inferior to the properties of larger as-printed reference tensile bars, and well below the minimum allowable values for the alloy. Pre- and post-test non-destructive analyses revealed that the primary source of the reduced properties and increased variability was attributable to heterogeneous surface topography with stress-concentrating contours and commensurate reduction in effective load-bearing area.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Measures of energy input and spatial energy distribution during laser powder bed fusion additive manufacturing have significant implications for the build quality of parts, specifically relating to formation of internal defects during processing. In this study, scanning electron microscopy was leveraged to investigate the effects of these distributions on the mechanical performance of parts manufactured using laser powder bed fusion as seen through the fracture surfaces resulting from uniaxial tensile testing. Variation in spatial energy density is shown to manifest in differences in defect morphology and mechanical properties. Computed tomography and scanning electron microscopy inspections revealed significant evidence of porosity acting as failure mechanisms in printed parts. These results establish an improved understanding of the effects of spatial energy distributions in laser powder bed fusion on mechanical performance.

Abstract not provided.