Publications

Savage, Mark E.; Struve, Kenneth W.; Stygar, William A.; Stoltzfus, Brian S.; Fowler, William E.; Bennett, Lawrence F.; Jones, Michael J.; Long, Finis W.; Matzen, M.K.; McDaniel, Dillon H.; McKee, George R.; Mckenney, John M.

Abstract not provided.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Glover, Steven F.; Davis, Jean-Paul D.; Schneider, Larry X.; Reed, Kim W.; Pena, Gary P.; Hall, Clint A.; Hanshaw, Heath L.; Hickman, Randy J.; Hodge, K.C.; Lemke, Raymond W.; Lehr, J.M.; Lucero, D.J.; McDaniel, Dillon H.; Puissant, J.G.; Rudys, Joseph M.; Sceiford, Matthew S.; Tullar, S.J.; Van De Valde, D.M.; White, F.E.; Warne, Larry K.; Coats, Rebecca S.; Johnson, William Arthur.

The success of dynamic materials properties research at Sandia National Laboratories has led to research into ultra-low impedance, compact pulsed power systems capable of multi-MA shaped current pulses with rise times ranging from 220-500 ns. The Genesis design consists of two hundred and forty 200 kV, 80 kA modules connected in parallel to a solid dielectric disk transmission line and is capable of producing 280 kbar of magnetic pressure (>500 kbar pressure in high Z materials) in a 1.75 nH, 20 mm wide stripline load. Stripline loads operating under these conditions expand during the experiment resulting in a time-varying load that can impact the performance and lifetime of the system. This paper provides analysis of time-varying stripline loads and the impact of these loads on system performance. Further, an approach to reduce dielectric stress levels through active damping is presented as a means to increase system reliability and lifetime. © 2011 IEEE.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Glover, Steven F.; White, F.E.; Foster, P.J.; Lucero, D.J.; Schneider, Larry X.; Reed, Kim W.; Pena, Gary P.; Davis, Jean-Paul D.; Hall, Clint A.; Hickman, Randy J.; Hodge, K.C.; Lemke, Raymond W.; Lehr, J.M.; McDaniel, Dillon H.; Puissant, J.G.; Rudys, Joseph M.; Sceiford, Matthew S.; Tullar, S.J.; Van De Valde, D.M.

Genesis is a compact pulsed power platform designed by Sandia National Laboratories to generate precision shaped multi-MA current waves with a rise time of 200-500 ns. In this system, two hundred and forty, 200 kV, 80 kA modules are selectively triggered to produce 280 kbar of magnetic pressure (>500 kbar pressure in high Z materials) in a stripline load for dynamic materials properties research. This new capability incorporates the use of solid dielectrics to reduce system inductance and size, programmable current shaping, and gas switches that must perform over a large range of operating conditions. Research has continued on this technology base with a focus on demonstrating the integrated performance of key concepts into a Genesis-like prototype called Protogen. Protogen measures approximately 1.4 m by 1.4 m and is designed to hold twelve Genesis modules. A fixed inductance load will allow rep-rate operation for component reliability and system lifetime experiments at the extreme electric field operating conditions expected in Genesis. © 2011 IEEE.

Glover, Steven F.; Lemke, Raymond W.; Lehr, J.M.; Lucero, Diego J.; McDaniel, Dillon H.; Rudys, Joseph M.; Sceiford, Matthew S.; Davis, Jean-Paul D.; Warne, Larry K.; Coats, Rebecca S.; Johnson, William Arthur.; Schneider, Larry X.; Pena, Gary P.; Hall, Clint A.; Hanshaw, Heath L.; Hickman, Randy J.

Abstract not provided.

Glover, Steven F.; McDaniel, Dillon H.; Rudys, Joseph M.; Sceiford, Matthew S.; Lemke, Raymond W.; Schneider, Larry X.; Pena, Gary P.; Davis, Jean-Paul D.; Hall, Clint A.; Hickman, Randy J.; Lehr, J.M.; Lucero, Diego J.

Abstract not provided.

Glover, Steven F.; Rudys, Joseph M.; Sceiford, Matthew S.; Warne, Larry K.; Coats, Rebecca S.; Johnson, William Arthur.; Davis, Jean-Paul D.; Schneider, Larry X.; Reed, Kim W.; Pena, Gary P.; Hall, Clint A.; Hickman, Randy J.; Lehr, J.M.; McDaniel, Dillon H.

Abstract not provided.

Savage, Mark E.; Jones, Michael J.; Long, Finis W.; McKee, George R.; Mckenney, John M.; McDaniel, Dillon H.; Struve, Kenneth W.; Fowler, William E.; Stygar, William A.

Abstract not provided.

McDaniel, Dillon H.

Abstract not provided.

Mazarakis, Michael G.; Fowler, William E.; Matzen, M.K.; McDaniel, Dillon H.; McKee, George R.; Savage, Mark E.; Struve, Kenneth W.; Stygar, William A.; Woodworth, Joseph R.

Sandia National Laboratories, Albuquerque, N.M., USA, in collaboration with the High Current Electronic Institute (HCEI), Tomsk, Russia, is developing a new paradigm in pulsed power technology: the Linear Transformer Driver (LTD) technology. This technological approach can provide very compact devices that can deliver very fast high current and high voltage pulses straight out of the cavity with out any complicated pulse forming and pulse compression network. Through multistage inductively insulated voltage adders, the output pulse, increased in voltage amplitude, can be applied directly to the load. The load may be a vacuum electron diode, a z-pinch wire array, a gas puff, a liner, an isentropic compression load (ICE) to study material behavior under very high magnetic fields, or a fusion energy (IFE) target. This is because the output pulse rise time and width can be easily tailored to the specific application needs. In this paper we briefly summarize the developmental work done in Sandia and HCEI during the last few years, and describe our new MYKONOS Sandia High Current LTD Laboratory. An extensive evaluation of the LTD technology is being performed at SNL and the High Current Electronic Institute (HCEI) in Tomsk Russia. Two types of High Current LTD cavities (LTD I-II, and 1-MA LTD) were constructed and tested individually and in a voltage adder configuration (1-MA cavity only). All cavities performed remarkably well and the experimental results are in full agreement with analytical and numerical calculation predictions. A two-cavity voltage adder is been assembled and currently undergoes evaluation. This is the first step towards the completion of the 10-cavity, 1-TW module. This MYKONOS voltage adder will be the first ever IVA built with a transmission line insulated with deionized water. The LTD II cavity renamed LTD III will serve as a test bed for evaluating a number of different types of switches, resistors, alternative capacitor configurations, cores and other cavity components. Experimental results will be presented at the Conference and in future publications.

Fowler, William E.; Woodworth, Joseph R.; Long, Finis W.; Matzen, M.K.; McDaniel, Dillon H.; McKee, George R.; Struve, Kenneth W.; Stygar, William A.

Abstract not provided.

LeChien, Keith R.; Woodworth, Joseph R.; Fowler, William E.; Long, Finis W.; Matzen, M.K.; McDaniel, Dillon H.; McKee, George R.; Struve, Kenneth W.; Stygar, William A.

Sandia National Laboratories, Albuquerque, N.M., USA, in collaboration with the High Current Electronic Institute (HCEI), Tomsk, Russia, is developing a new paradigm in pulsed power technology: the Linear Transformer Driver (LTD) technology. This technological approach can provide very compact devices that can deliver very fast high current and high voltage pulses straight out of the cavity with out any complicated pulse forming and pulse compression network. Through multistage inductively insulated voltage adders, the output pulse, increased in voltage amplitude, can be applied directly to the load. The load may be a vacuum electron diode, a z-pinch wire array, a gas puff, a liner, an isentropic compression load (ICE) to study material behavior under very high magnetic fields, or a fusion energy (IFE) target. This is because the output pulse rise time and width can be easily tailored to the specific application needs. In this paper we briefly summarize the developmental work done in Sandia and HCEI during the last few years, and describe our new MYKONOS Sandia High Current LTD Laboratory.

Physical Review E

Stygar, William A.; Sinars, Daniel S.; Cuneo, M.E.; Nash, Thomas J.; Chandler, Gordon A.; Matzen, M.K.; Struve, Kenneth W.; McDaniel, Dillon H.

Abstract not provided.

McDaniel, Dillon H.

Abstract not provided.

Struve, Kenneth W.; Savage, Mark E.; Stygar, William A.; Weed, John W.; Weinbrecht, Edward A.; Cuneo, M.E.; Bloomquist, Douglas D.; Davis, Jean-Paul D.; LeChien, Keith R.; Matzen, M.K.; McKee, George R.; McDaniel, Dillon H.

Abstract not provided.

Savage, Mark E.; LeChien, Keith R.; Stygar, William A.; Maenchen, John E.; McDaniel, Dillon H.; Struve, Kenneth W.

Abstract not provided.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Mazarakis, M.G.; Fowler, William E.; Long, Finis W.; McDaniel, Dillon H.; Olson, Craig L.; Rogowski, Sonrisa T.; Sharpe, R.A.; Struve, Kenneth W.; Kim, A.A.

During the last few years Sandia is actively pursuing the development of new accelerators based on the novel technology of Linear Transformer Driver (LTD). This effort is done in close collaboration with the High Current Electronic Institute (HCEI) in Tomsk, Russia, where the LTD idea was first conceived and developed. LTD based drivers are currently considered for many applications including future very high current Z-pinch drivers like ZX and IFE (Inertial Fusion Energy), medium current drivers with adjustable pulse length for ICE (Isentropic Compression Experiments), and finally relatively lower current accelerators for radiography and x-pinch. Currently we have in operation the following devices: One 500-kA, 100-kV LTD cavity, a 1-MVvoltage adder composed of seven smaller LTD cavities for radiography, and one 1-MA, 100-kV cavity. The first two are in Sandia while the latter one is still in Tomsk. In addition a number of stackable 1-MA cavities are under construction to be utilized as building blocks for a 1-MA, 1-MV voltage adder module. This module will serve as a prototype for longer, higher voltage modules, a number of which, connected in parallel, could become the driver of an IFE fusion reactor or a high current Z-pinch driver (ZX). The IFE requirements are more demanding since the driver must operate in rep-rated mode with a frequency of 0.1 Hz. In this paper we mainly concentrate on the higher current LTDs: We briefly outline the principles of operation and architecture and present a first cut design of an IFE, LTD z-pinch driver. © 2005 IEEE.

Nash, Thomas J.; McDaniel, Dillon H.

We explored the potential of Quasi-Spherical Direct Drive (QSDD) to reduce the cost and risk of a future fusion driver for Inertial Confinement Fusion (ICF) and to produce megajoule thermonuclear yield on the renovated Z Machine with a pulse shortening Magnetically Insulated Current Amplifier (MICA). Analytic relationships for constant implosion velocity and constant pusher stability have been derived and show that the required current scales as the implosion time. Therefore, a MICA is necessary to drive QSDD capsules with hot-spot ignition on Z. We have optimized the LASNEX parameters for QSDD with realistic walls and mitigated many of the risks. Although the mix-degraded 1D yield is computed to be {approx}30 MJ on Z, unmitigated wall expansion under the > 100 gigabar pressure just before burn prevents ignition in the 2D simulations. A squeezer system of adjacent implosions may mitigate the wall expansion and permit the plasma to burn.

Mazarakis, Michael G.; Cuneo, M.E.; Stygar, William A.; Harjes, Henry C.; Sinars, Daniel S.; Nash, Thomas J.; Struve, Kenneth W.; McDaniel, Dillon H.

Abstract not provided.

Savage, Mark E.; Maenchen, John E.; McDaniel, Dillon H.; Pasik, Michael F.; Pointon, Timothy D.; Owen, Albert C.; Seidel, David B.; Stoltzfus, Brian S.; Struve, Kenneth W.; Warne, Larry K.; Bennett, Lawrence F.; Woodworth, Joseph R.; Bliss, David E.; Clark, Waylon T.; Coats, Rebecca S.; Elizondo-Decanini, Juan M.; LeChien, Keith R.; Harjes, Henry C.; Lehr, J.M.

Abstract not provided.

Bloomquist, Douglas D.; McDaniel, Dillon H.; McKee, George R.; Donovan, Guy L.; Weed, John W.; Faturos, Thomas V.; Tabor, Debra A.; Jordan, Carla M.

Sandia's Z Refurbishment (ZR) Project formally began in February 2002 to increase the Z Accelerator's utilization by providing the capability to perform more shots, improve precision and pulse shape variability, and increase delivered current. A project update was provided at the 15th International Pulsed Power Conference in 2005. The Z facility was shut down in July 2006 for structural/infrastructure modifications and installation of new pulsed power systems. The refurbishment will conclude in 2007. This paper provides a status update of the project covering the past 2 years of activities.

Physical Review E

Cuneo, M.E.; McDaniel, Dillon H.; Stygar, William A.; Sinars, Daniel S.; Harjes, Henry C.; Jones, Brent M.; Nash, Thomas J.; Struve, Kenneth W.

Abstract not provided.

LeChien, Keith R.; Woodworth, Joseph R.; Savage, Mark E.; Bliss, David E.; Lehr, J.M.; Maenchen, John E.; McDaniel, Dillon H.; Struve, Kenneth W.; Stygar, William A.; Van Den Avyle, Justin J.

Abstract not provided.

Bloomquist, Douglas D.; McDaniel, Dillon H.; McKee, George R.; Donovan, Guy L.; Weed, John W.; Faturos, Thomas V.; Jordan, Carla M.; Weinbrecht, Edward A.

Abstract not provided.

Mazarakis, Michael G.; Fowler, William E.; McDaniel, Dillon H.; Struve, Kenneth W.; Stygar, William A.

Abstract not provided.

Mazarakis, Michael G.; Woodworth, Joseph R.; Fowler, William E.; McDaniel, Dillon H.; Struve, Kenneth W.; Stygar, William A.

Abstract not provided.