Publications

Lamppa, Derek C.; Gomez, Matthew R.; Lucero, Larry M.; Rovang, Dean C.; Kaye, Ronald J.; Meissner, Joel M.; Ales, Matt A.

Abstract not provided.

Review of Scientific Instruments

Awe, T.J.; Shelton, Keegan P.; Sefkow, Adam B.; Lamppa, Derek C.; Baker, J.L.; Rovang, Dean C.; Robertson, Grafton K.

A cryogenically cooled hardware platform has been developed and commissioned on the Z Facility at Sandia National Laboratories in support of the Magnetized Liner Inertial Fusion (MagLIF) Program. MagLIF is a magneto-inertial fusion concept that employs a magnetically imploded metallic tube (liner) to compress and inertially confine premagnetized and preheated fusion fuel. The fuel is preheated using a ∼2 kJ laser that must pass through a ∼1.5-3.5-μm-thick polyimide "window" at the target's laser entrance hole (LEH). As the terawatt-class laser interacts with the dense window, laser plasma instabilities (LPIs) can develop, which reduce the preheat energy delivered to the fuel, initiate fuel contamination, and degrade target performance. Cryogenically cooled targets increase the parameter space accessible to MagLIF target designs by allowing nearly 10 times thinner windows to be used for any accessible gas density. Thinner LEH windows reduce the deleterious effects of difficult to model LPIs. The Z Facility's cryogenic infrastructure has been significantly altered to enable compatibility with the premagnetization and fuel preheat stages of MagLIF. The MagLIF cryostat brings the liquid helium coolant directly to the target via an electrically resistive conduit. This design maximizes cooling power while allowing rapid diffusion of the axial magnetic field supplied by external Helmholtz-like coils. A variety of techniques have been developed to mitigate the accumulation of ice from vacuum chamber contaminants on the cooled LEH window, as even a few hundred nanometers of ice would impact laser energy coupling to the fuel region. The MagLIF cryostat has demonstrated compatibility with the premagnetization and preheat stages of MagLIF and the ability to cool targets to liquid deuterium temperatures in approximately 5 min.

Gomez, Matthew R.; Slutz, Stephen A.; Jennings, Christopher A.; Harvey-Thompson, Adam J.; Weis, Matthew R.; Lamppa, Derek C.; Hutsel, Brian T.; Ampleford, David A.; Awe, Thomas J.; Bliss, David E.; Chandler, Gordon A.; Geissel, Matthias G.; Hahn, Kelly D.; Hansen, Stephanie B.; Harding, Eric H.; Hess, Mark H.; Knapp, Patrick K.; Laity, George R.; Martin, Matthew; Nagayama, Taisuke N.; Rovang, Dean C.; Ruiz, Carlos L.; Savage, Mark E.; Schmit, Paul S.; Schwarz, Jens S.; Smith, Ian C.; Vesey, Roger A.; Yu, Edmund Y.; Cuneo, M.E.; Jones, Brent M.; Peterson, Kyle J.; Porter, John L.; Rochau, G.A.; Sinars, Daniel S.; Stygar, William A.

Abstract not provided.

Awe, Thomas J.; Shelton, Keegan P.; Sefkow, Adam B.; Lamppa, Derek C.; Baker, J.L.; Rovang, Dean C.; Aragon, Carlos A.; Robertson, Grafton K.

Abstract not provided.

Bierner, Jessica A.; Rovang, Dean C.; Jones, Brent M.; Peebles, Henry C.

Abstract not provided.

Gomez, Matthew R.; Hutsel, Brian T.; Jennings, Christopher A.; Martin, Matthew; Cuneo, M.E.; Hess, Mark H.; Laity, George R.; Lamppa, Derek C.; Peterson, Kyle J.; Rochau, G.A.; Rovang, Dean C.; Sinars, Daniel S.; Slutz, Stephen A.; Stygar, William A.

Abstract not provided.

McBride, Ryan D.; Bliss, David E.; Martin, Matthew; Jennings, Christopher A.; Lamppa, Derek C.; Dolan, Daniel H.; Lemke, Raymond W.; Rovang, Dean C.; Rochau, G.A.; Cuneo, M.E.; Sinars, Daniel S.; Intrator, Thomas P.; Weber, Thomas E.

Abstract not provided.

Bierner, Jessica A.; Rovang, Dean C.; Peebles, Henry C.; Jones, Brent M.

Abstract not provided.

Slutz, Stephen A.; Jennings, Christopher A.; Awe, Thomas J.; Shipley, Gabriel A.; Lamppa, Kerry P.; Rovang, Dean C.; Gomez, Matthew R.; Hutsel, Brian T.; McBride, Ryan D.

Abstract not provided.

Hahn, Kelly D.; Chandler, Gordon A.; Ruiz, Carlos L.; Cooper, Gary W.; Gomez, Matthew R.; Slutz, Stephen A.; Sefkow, Adam B.; Sinars, Daniel S.; Hansen, Stephanie B.; Knapp, Patrick K.; Schmit, Paul S.; Harding, Eric H.; Jennings, Christopher A.; Awe, Thomas J.; Geissel, Matthias G.; Rovang, Dean C.; Torres, Jose A.; Bur, James A.; Cuneo, M.E.; Glebov, V.Yu.; Harvey-Thompson, Adam J.; Hess, Mark H.; Johns, Owen J.; Jones, Brent M.; Lamppa, Derek C.; Lash, Joel S.; Martin, Matthew; McBride, Ryan D.; Peterson, Kyle J.; Porter, John L.; Reneker, Joseph R.; Robertson, Grafton K.; Rochau, G.A.; Savage, Mark E.; Smith, Ian C.; Styron, Jedediah D.; Vesey, Roger A.

Abstract not provided.

Hahn, Kelly D.; Chandler, Gordon A.; Ruiz, Carlos L.; Cooper, Gary W.; Gomez, Matthew R.; Slutz, Stephen A.; Sefkow, Adam B.; Sinars, Daniel S.; Hansen, Stephanie B.; Knapp, Patrick K.; Schmit, Paul S.; Harding, Eric H.; Jennings, Christopher A.; Awe, Thomas J.; Geissel, Matthias G.; Rovang, Dean C.; Torres, Jose A.; Bur, James A.; Cuneo, M.E.; Glebov, V.Yu.; Harvey-Thompson, Adam J.; Hess, Mark H.; Johns, Owen J.; Jones, Brent M.; Lamppa, Derek C.; Lash, Joel S.; Martin, Matthew; McBride, Ryan D.; Peterson, Kyle J.; Porter, John L.; Reneker, Joseph R.; Robertson, Grafton K.; Rochau, G.A.; Savage, Mark E.; Smith, Ian C.; Styron, Jedediah D.; Vesey, Roger A.

Abstract not provided.

Journal of Physics: Conference Series

Hahn, K.D.; Chandler, Gordon A.; Ruiz, Carlos L.; Cooper, Gary W.; Gomez, Matthew R.; Slutz, S.; Sefkow, Adam B.; Sinars, Daniel S.; Hansen, Stephanie B.; Knapp, P.F.; Schmit, Paul S.; Harding, Eric H.; Jennings, C.A.; Awe, T.J.; Geissel, Matthias G.; Rovang, Dean C.; Torres, Jose A.; Bur, J.A.; Cuneo, M.E.; Glebov, V.Y.; Harvey-Thompson, Adam J.; Herrman, M.C.; Hess, Mark H.; Johns, Owen J.; Jones, Brent M.; Lamppa, Derek C.; Lash, Joel S.; Martin, M.R.; McBride, Ryan D.; Peterson, Kyle J.; Porter, John L.; Reneker, Joseph R.; Robertson, Grafton K.; Rochau, G.A.; Savage, Mark E.; Smith, Ian C.; Styron, Jedediah D.; Vesey, Roger A.

Several magnetized liner inertial fusion (MagLIF) experiments have been conducted on the Z accelerator at Sandia National Laboratories since late 2013. Measurements of the primary DD (2.45 MeV) neutrons for these experiments suggest that the neutron production is thermonuclear. Primary DD yields up to 3e12 with ion temperatures ∼2-3 keV have been achieved. Measurements of the secondary DT (14 MeV) neutrons indicate that the fuel is significantly magnetized. Measurements of down-scattered neutrons from the beryllium liner suggest ρRliner∼1g/cm2. Neutron bang times, estimated from neutron time-of-flight (nTOF) measurements, coincide with peak x-ray production. Plans to improve and expand the Z neutron diagnostic suite include neutron burn-history diagnostics, increased sensitivity and higher precision nTOF detectors, and neutron recoil-based yield and spectral measurements.

McBride, Ryan D.; Bliss, David E.; Gomez, Matthew R.; Hansen, Stephanie B.; Martin, Matthew; Jennings, Christopher A.; Slutz, Stephen A.; Rovang, Dean C.; Knapp, Patrick K.; Schmit, Paul S.; Awe, Thomas J.; Hess, Mark H.; Lemke, Raymond W.; Dolan, Daniel H.; Lamppa, Derek C.; Jobe, Marc R.; Fang, Lu F.; Hahn, Kelly D.; Chandler, Gordon A.; Cooper, Gary W.; Ruiz, Carlos L.; Robertson, Grafton K.; Cuneo, M.E.; Sinars, Daniel S.; Tomlinson, Kurt T.; Smith, Gary S.; Paguio, Reny P.; Intrator, Tom P.; Weber, Thomas E.; Greenly, John B.

We report on the progress made to date for a Laboratory Directed Research and Development (LDRD) project aimed at diagnosing magnetic flux compression on the Z pulsed-power accelerator (0-20 MA in 100 ns). Each experiment consisted of an initially solid Be or Al liner (cylindrical tube), which was imploded using the Z accelerator's drive current (0-20 MA in 100 ns). The imploding liner compresses a 10-T axial seed field, B z ( 0 ) , supplied by an independently driven Helmholtz coil pair. Assuming perfect flux conservation, the axial field amplification should be well described by B z ( t ) = B z ( 0 ) x [ R ( 0 ) / R ( t )] 2 , where R is the liner's inner surface radius. With perfect flux conservation, B z ( t ) and dB z / dt values exceeding 10 4 T and 10 12 T/s, respectively, are expected. These large values, the diminishing liner volume, and the harsh environment on Z, make it particularly challenging to measure these fields. We report on our latest efforts to do so using three primary techniques: (1) micro B-dot probes to measure the fringe fields associated with flux compression, (2) streaked visible Zeeman absorption spectroscopy, and (3) fiber-based Faraday rotation. We also mention two new techniques that make use of the neutron diagnostics suite on Z. These techniques were not developed under this LDRD, but they could influence how we prioritize our efforts to diagnose magnetic flux compression on Z in the future. The first technique is based on the yield ratio of secondary DT to primary DD reactions. The second technique makes use of the secondary DT neutron time-of-flight energy spectra. Both of these techniques have been used successfully to infer the degree of magnetization at stagnation in fully integrated Magnetized Liner Inertial Fusion (MagLIF) experiments on Z [P. F. Schmit et al. , Phys. Rev. Lett. 113 , 155004 (2014); P. F. Knapp et al. , Phys. Plasmas, 22 , 056312 (2015)]. Finally, we present some recent developments for designing and fabricating novel micro B-dot probes to measure B z ( t ) inside of an imploding liner. In one approach, the micro B-dot loops were fabricated on a printed circuit board (PCB). The PCB was then soldered to off-the-shelf 0.020- inch-diameter semi-rigid coaxial cables, which were terminated with standard SMA connectors. These probes were recently tested using the COBRA pulsed power generator (0-1 MA in 100 ns) at Cornell University. In another approach, we are planning to use new multi-material 3D printing capabilities to fabricate novel micro B-dot packages. In the near future, we plan to 3D print these probes and then test them on the COBRA generator. With successful operation demonstrated at 1-MA, we will then make plans to use these probes on a 20-MA Z experiment.

McBride, Ryan D.; Slutz, Stephen A.; Sinars, Daniel S.; Vesey, Roger A.; Gomez, Matthew R.; Sefkow, Adam B.; Hansen, Stephanie B.; Cochrane, Kyle C.; Schmit, Paul S.; Knapp, Patrick K.; Geissel, Matthias G.; Harvey-Thompson, Adam J.; Jennings, Christopher A.; Martin, Matthew; Awe, Thomas J.; Rovang, Dean C.; Lamppa, Derek C.; Peterson, Kyle J.; Rochau, G.A.; Porter, John L.; Stygar, William A.; Cuneo, M.E.

Abstract not provided.

Digest of Technical Papers-IEEE International Pulsed Power Conference

Mazarakis, Michael G.; Cuneo, M.; Hess, M.; Kiefer, Mark L.; Leckbee, Joshua L.; McKee, R.; Rovang, Dean C.

Presently the Self Magnetic Pinch (SMP) diode is successfully utilized for flash radiography with pulsed power drivers. However, it is not capable of more than one pulse. Multi-pulse single-Axis radiography is most preferred since it provides images of time-evolving dynamic targets. In an SMP diode, because the anode cathode (A-K) gap is very small (∼1-2 cm), the debris from the anode converter target arrives soon after the first pulse and completely destroy the cathode electron emitter, and thus the diode cannot produce a second pulse. We propose a feasibility study to scientifically evaluate the idea of decoupling the anode converter from the cathode electron emitter. This work will be based on two successful previous works we have accomplished: first, making a very small pencil-like beam in a magnetically immersed foilless diode (M.G. Mazarakis et al., Applied Physics Letters, 7, pp. 832 (1996)); and second, successfully demonstrating the two-pulse operation of a foilless diode with the RIIM accelerator (M. G. Mazarakis et al., Applied Physics 64 part I pp. 4815, (1988) Our approach will combine the above experimentally demonstrated successful work. The generated beam of 40-50 kA will be propagated in the same diode magnetic solenoid for a sufficient distance before striking the converter target. This way the diode could be multi-pulsed before the target debris reaches the cathode. Although the above describes the option of a foilless diode and a solenoidal transport system, a similar design could be made for a non-immersed low emittance 10 kA velvet emitter foilless diode.

Rovang, Dean C.; Cuneo, M.E.; McBride, Ryan D.; Jones, Brent M.; Mckenney, John M.; Peebles, Henry C.; Balch, Dorian K.; Spencer, Decker C.; Austin, Kevin N.; Sinars, Daniel S.; Rochau, G.A.

Abstract not provided.

Slutz, Stephen A.; Gomez, Matthew R.; Sefkow, Adam B.; Vesey, Roger A.; Sinars, Daniel S.; Rovang, Dean C.; Peterson, Kyle J.; Stygar, William A.; Awe, Thomas J.; McBride, Ryan D.; Hahn, Kelly D.; Cooper, Gary W.; Cuneo, M.E.; Campbell, E.M.C.; Herrmann, M.C.H.; Geissel, Matthias G.

Abstract not provided.

Hahn, Kelly D.; Chandler, Gordon A.; Ruiz, Carlos L.; Cooper, Gary W.; Gomez, Matthew R.; Slutz, Stephen A.; Sefkow, Adam B.; Sinars, Daniel S.; Hansen, Stephanie B.; Knapp, Patrick K.; Schmit, Paul S.; Harding, Eric H.; Jennings, Christopher A.; Awe, Thomas J.; Geissel, Matthias G.; Rovang, Dean C.; Torres, Jose A.; Bur, James A.; Cuneo, M.E.; Glebov, V.Yu.; Harvey-Thompson, Adam J.; Herrmann, M.C.H.; Hess, Mark H.; Johns, Owen J.; Jones, Brent M.; Lamppa, Derek C.; Martin, Matthew; McBride, Ryan D.; Peterson, Kyle J.; Porter, John L.; Reneker, Joseph R.; Robertson, Grafton K.; Rochau, G.A.; Savage, Mark E.; Smith, Ian C.; Styron, Jedediah D.; Vesey, Roger A.

Abstract not provided.

Harding, Eric H.; Gomez, Matthew R.; Slutz, Stephen A.; Sefkow, Adam B.; Geissel, Matthias G.; Harvey-Thompson, Adam J.; Schollmeier, Marius; Peterson, Kyle J.; Awe, Thomas J.; Hansen, Stephanie B.; Hahn, Kelly D.; Knapp, Patrick K.; Schmit, Paul S.; Ruiz, Carlos L.; Sinars, Daniel S.; Jennings, Christopher A.; Smith, Ian C.; Rovang, Dean C.; Chandler, Gordon A.; Martin, Matthew; McBride, Ryan D.; Porter, John L.; Rochau, G.A.; Harding, Eric H.

Abstract not provided.

Harding, Eric H.; Gomez, Matthew R.; Slutz, Stephen A.; Geissel, Matthias G.; Harvey-Thompson, Adam J.; Schollmeier, Marius; Peterson, Kyle J.; Awe, Thomas J.; Hansen, Stephanie B.; Schmit, Paul S.; Ruiz, Carlos L.; Sinars, Daniel S.; Jennings, Christopher A.; Smith, Ian C.; Rovang, Dean C.; Chandler, Gordon A.; Martin, Matthew; McBride, Ryan D.; Porter, John L.; Rochau, G.A.

Abstract not provided.

McBride, Ryan D.; Slutz, Stephen A.; Sinars, Daniel S.; Vesey, Roger A.; Gomez, Matthew R.; Sefkow, Adam B.; Hansen, Stephanie B.; Cochrane, Kyle C.; Rovang, Dean C.; Lamppa, Derek C.; Geissel, Matthias G.; Harvey-Thompson, Adam J.; Schmit, Paul S.; Knapp, Patrick K.; Awe, Thomas J.; Jennings, Christopher A.; Martin, Matthew; Peterson, Kyle J.; Rochau, G.A.; Porter, John L.; Stygar, William A.; Cuneo, M.E.

Abstract not provided.

Mazarakis, Michael G.; Cuneo, M.E.; Hess, Mark H.; Kiefer, Mark L.; Leckbee, Joshua L.; McKee, George R.; Rovang, Dean C.

Abstract not provided.

Gomez, Matthew R.; Slutz, Stephen A.; Sefkow, Adam B.; Geissel, Matthias G.; Harvey-Thompson, Adam J.; Peterson, Kyle J.; Hansen, Stephanie B.; Hahn, Kelly D.; Knapp, Patrick K.; Schmit, Paul S.; Ruiz, Carlos L.; Sinars, Daniel S.; Awe, Thomas J.; Harding, Eric H.; Jennings, Christopher A.; Smith, Ian C.; Rovang, Dean C.; Chandler, Gordon A.; Cuneo, M.E.; Lamppa, Derek C.; Martin, Matthew; McBride, Ryan D.; Porter, John L.; Rochau, G.A.

Abstract not provided.

Gomez, Matthew R.; Slutz, Stephen A.; Sefkow, Adam B.; Geissel, Matthias G.; Harvey-Thompson, Adam J.; Peterson, Kyle J.; Awe, Thomas J.; Hansen, Stephanie B.; Harding, Eric H.; Hahn, Kelly D.; Knapp, Patrick K.; Schmit, Paul S.; Ruiz, Carlos L.; Sinars, Daniel S.; Jennings, Christopher A.; Smith, Ian C.; Rovang, Dean C.; Chandler, Gordon A.; Martin, Matthew; McBride, Ryan D.; Porter, John L.; Rochau, G.A.

Abstract not provided.

McBride, Ryan D.; Sinars, Daniel S.; Slutz, Stephen A.; Gomez, Matthew R.; Sefkow, Adam B.; Hansen, Stephanie B.; Awe, Thomas J.; Peterson, Kyle J.; Knapp, Patrick K.; Schmit, Paul S.; Rovang, Dean C.; Geissel, Matthias G.; Vesey, Roger A.; Harvey-Thompson, Adam J.; Jennings, Christopher A.; Martin, Matthew; Lemke, Raymond W.; Hahn, Kelly D.; Harding, Eric H.; Cuneo, M.E.; Porter, John L.; Rochau, G.A.; Stygar, William A.

Abstract not provided.