Publications

30 Results
Skip to search filters

A retrospective of VAWT technology

Berg, Dale E.; Ashwill, Thomas D.

The study of Vertical-Axis Wind Turbine (VAWT) technology at Sandia National Laboratories started in the 1970's and concluded in the 1990's. These studies concentrated on the Darrieus configurations because of their high inherent efficiency, but other configurations (e.g., the Savonius turbine) were also examined. The Sandia VAWT program culminated with the design of the 34-m 'Test Bed' Darrieus VAWT. This turbine was designed and built to test various VAWT design concepts and to provide the necessary databases to validate analytical design codes and algorithms. Using the Test Bed as their starting point, FloWind Corp. developed a commercial VAWT product line with composite blades and an extended height-to-diameter ratio. The purpose of this paper is to discuss the design process and results of the Sandia 34-m VAWT Test Bed program and the FloWind prototype development program with an eye toward future offshore designs. This paper is our retrospective of the design, analysis, testing and commercial process. Special emphasis is given to those lessons learned that will aid in the development of an off-shore VAWT.

More Details

Aerodynamic and aeroacoustic properties of a flatback airfoil: An update

47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition

Barone, Matthew F.; Berg, Dale E.

Results from an experimental study of the aerodynamic and aeroacoustic properties of a flatback version of the TU Delft DU97-W-300 airfoil are presented for a chord Reynolds number of 3 × 106. The data were gathered in the Virginia Tech Stability Wind Tunnel, which uses a special aeroacoustic test section to enable measurements of airfoil self-noise. Corrected wind tunnel aerodynamic measurements for the DU97-W-300 are compared to previous solid wall wind tunnel data and are shown to give good agreement. Aeroacoustic data are presented for the flatback airfoil, with a focus on the amplitude and frequency of noise associated with the vortex-shedding tone from the blunt trailing edge wake. The effect of a splitter plate attachment on both drag and noise is also presented. Computational Fluid Dynamics predictions of the aerodynamic properties of both the unmodified DU97-W-300 and the flatback version are compared to the experimental data.

More Details

Aerodynamic and aeroacoustic properties of flatback airfoils

46th AIAA Aerospace Sciences Meeting and Exhibit

Berg, Dale E.; Zayas, Jose R.

In 2002, Sandia National Laboratories (SNL) initiated a research program to demonstrate the use of carbon fiber in wind turbine blades and to investigate advanced structural concepts through the Blade Systems Design Study, known as the BSDS. One of the blade designs resulting from this program, commonly referred to as the BSDS blade, resulted from a systems approach in which manufacturing, structural and aerodynamic performance considerations were all simultaneously included in the design optimization. The BSDS blade design utilizes "flatback" airfoils for the inboard section of the blade to achieve a lighter, stronger blade. Flatback airfoils are generated by opening up the trailing edge of an airfoil uniformly along the camber line, thus preserving the camber of the original airfoil. This process is in distinct contrast to the generation of truncated airfoils, where the trailing edge the airfoil is simply cut off, changing the camber and subsequently degrading the aerodynamic performance. Compared to a thick conventional, sharp trailing-edge airfoil, a flatback airfoil with the same thickness exhibits increased lift and reduced sensitivity to soiling. Although several commercial turbine manufacturers have expressed interest in utilizing flatback airfoils for their wind turbine blades, they are concerned with the potential extra noise that such a blade will generate from the blunt trailing edge of the flatback section. In order to quantify the noise generation characteristics of flatback airfoils, Sandia National Laboratories has conducted a wind tunnel test to measure the noise generation and aerodynamic performance characteristics of a regular DU97-300-W airfoil, a 10% trailing edge thickness flatback version of that airfoil, and the flatback fitted with a trailing edge treatment. The paper describes the test facility, the models, and the test methodology, and provides some preliminary results from the test.

More Details

Active load control techniques for wind turbines

Berg, Dale E.

This report provides an overview on the current state of wind turbine control and introduces a number of active techniques that could be potentially used for control of wind turbine blades. The focus is on research regarding active flow control (AFC) as it applies to wind turbine performance and loads. The techniques and concepts described here are often described as 'smart structures' or 'smart rotor control'. This field is rapidly growing and there are numerous concepts currently being investigated around the world; some concepts already are focused on the wind energy industry and others are intended for use in other fields, but have the potential for wind turbine control. An AFC system can be broken into three categories: controls and sensors, actuators and devices, and the flow phenomena. This report focuses on the research involved with the actuators and devices and the generated flow phenomena caused by each device.

More Details

Flatback airfoil wind tunnel experiment

Berg, Dale E.

A computational fluid dynamics study of thick wind turbine section shapes in the test section of the UC Davis wind tunnel at a chord Reynolds number of one million is presented. The goals of this study are to validate standard wind tunnel wall corrections for high solid blockage conditions and to reaffirm the favorable effect of a blunt trailing edge or flatback on the performance characteristics of a representative thick airfoil shape prior to building the wind tunnel models and conducting the experiment. The numerical simulations prove the standard wind tunnel corrections to be largely valid for the proposed test of 40% maximum thickness to chord ratio airfoils at a solid blockage ratio of 10%. Comparison of the computed lift characteristics of a sharp trailing edge baseline airfoil and derived flatback airfoils reaffirms the earlier observed trend of reduced sensitivity to surface contamination with increasing trailing edge thickness.

More Details
30 Results
30 Results