Publications

Results 1–25 of 27
Skip to search filters

Contribution of the backstreaming ions to the self-magnetic pinch (SMP) diode current

Physics of Plasmas

Mazarakis, Michael G.; Bennett, Nichelle; Cuneo, M.E.; Fournier, Sean D.; Johnston, Mark D.; Kiefer, Mark L.; Leckbee, Joshua L.; Nielsen, D.S.; Oliver, Bryan V.; Sceiford, Matthew S.; Simpson, Sean S.; Renk, Timothy J.; Ruiz, Carlos L.; Webb, Timothy J.; Ziska, Derek Z.; Droemer, Darryl W.; Gignac, Raymond E.; Obregon, Robert J.; Wilkins, Frank L.; Welch, Dale R.

The results presented here were obtained with a self-magnetic pinch (SMP) diode mounted at the front high voltage end of the RITS accelerator. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The RITS driver together with the SMP diode has produced x-ray spots of the order of 1 mm in diameter and doses adequate for the radiographic imaging of high area density objects. Although, through the years, a number of different types of radiographic electron diodes have been utilized with SABER, HERMES III and RITS accelerators, the SMP diode appears to be the most successful and simplest diode for the radiographic investigation of various objects. Our experiments had two objectives: first to measure the contribution of the back-streaming ion currents emitted from the anode target and second to try to evaluate the energy of those ions and hence the Anode-Cathode (A-K) gap actual voltage. In any very high voltage inductive voltage adder utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the A-K gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (∼1 cm) and the diode region very hostile. The accelerating voltage quoted in the literature is from estimates based on the measurements of the anode and cathode currents of the MITL far upstream from the diode and utilizing the para-potential flow theories and inductive corrections. Thus, it would be interesting to have another independent measurement to evaluate the A-K voltage. The diode's anode is made of a number of high-Z metals in order to produce copious and energetic flash x-rays. It was established experimentally that the back-streaming ion currents are a strong function of the anode materials and their stage of cleanness. We have measured the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip for various diode configurations and different techniques of target cleaning treatment: namely, heating at very high temperatures with DC and pulsed current, with RF plasma cleaning, and with both plasma cleaning and heating. We have also evaluated the A-K gap voltage by energy filtering technique. Experimental results in comparison with LSP simulations are presented.

More Details

Investigations of shot reproducibility for the SMP diode at 4.5 MV

Cordova, S.; Johnston, Mark D.; Leckbee, Joshua L.; Kiefer, Mark L.; Nielsen, D.S.; Renk, Timothy J.; Webb, Timothy J.; Ziska, Derek Z.

In experiments conducted on the RITS-6 accelerator, the SMP diode exhibits sig- ni cant shot-to-shot variability. Speci cally, for identical hardware operated at the same voltage, some shots exhibit a catastrophic drop in diode impedance. A study is underway to identify sources of shot-to-shot variations which correlate with diode impedance collapse. To remove knob emission as a source, only data from a shot series conducted with a 4.5-MV peak voltage are considered. The scope of this report is limited to sources of variability which occur away from the diode, such as power ow emission and trajectory changes, variations in pulsed power, dustbin and transmission line alignment, and di erent knob shapes. We nd no changes in the transmission line hardware, alignment, or hardware preparation methods which correlate with impedance collapse. However, in classifying good versus poor shots, we nd that there is not a continuous spectrum of diode impedance behavior but that the good and poor shots can be grouped into two distinct impedance pro les. This result forms the basis of a follow-on study focusing on the variability resulting from diode physics. 3

More Details

Pinned, optically aligned diagnostic dock for use on the Z facility

Review of Scientific Instruments

Gomez, Matthew R.; Rochau, G.A.; Bailey, James E.; Dunham, Gregory S.; Kernaghan, M.D.; Gard, P.; Robertson, Grafton K.; Owen, A.C.; Argo, J.W.; Nielsen, D.S.; Lake, Patrick W.

The pinned optically aligned diagnostic dock (PODD) is a multi-configuration diagnostic platform designed to measure x-ray emission on the Z facility. The PODD houses two plasma emission acquisition (PEA) systems, which are aligned with a set of precision machined pins. The PEA systems are modular, allowing a single diagnostic housing to support several different diagnostics. The PEA configurations fielded to date include both time-resolved and time-integrated, 1D spatially resolving, elliptical crystal spectrometers, and time-integrated, 1D spatially resolving, convex crystal spectrometers. Additional proposed configurations include time-resolved, monochromatic mirrored pinhole imagers and arrays of filtered x-ray diodes, diamond photo-conducting diode detectors, and bolometers. The versatility of the PODD system will allow the diagnostic configuration of the Z facility to be changed without significantly adding to the turn-around time of the machine. Additionally, the PODD has been designed to allow instrument setup to be completed entirely off-line, leaving only a refined alignment process to be performed just prior to a shot, which is a significant improvement over the instrument the PODD replaces. Example data collected with the PODD are presented. © 2012 American Institute of Physics.

More Details

Crystal spectroscopy of silicon aero-gel end-caps driven by a dynamic hohlraum on Z

Journal of Quantitative Spectroscopy and Radiative Transfer

Nash, Thomas J.; Sanford, T.W.L.; Mock, R.C.; Leeper, Ramon J.; Chandler, Gordon A.; Bailey, James E.; Mckenney, John M.; Mehlhorn, Thomas A.; Seaman, J.F.; McGurn, John S.; Schroen, D.; Russell, C.; Lake, P.E.; Jobe, D.O.; Gilliland, Terrance L.; Nielsen, D.S.; Lucas, J.; Moore, T.; Torres, J.A.; Macfarlane, Joseph J.; Apruzese, J.P.; Chrien, R.; Idzorek, G.; Peterson, D.L.; Watt, R.

We present results from crystal spectroscopic analysis of silicon aero-gel foams heated by dynamic hohlraums on Z. The dynamic hohlraum on Z creates a radiation source with a 230-eV average temperature over a 2.4-mm diameter. In these experiments silicon aero-gel foams with 10 - mg/cm3 densities and 1.7-mm lengths were placed on both ends of the dynamic hohlraum. Several crystal spectrometers were placed both above and below the z-pinch to diagnose the temperature of the silicon aero-gel foam using the K-shell lines of silicon. The crystal spectrometers were (1) temporally integrated and spatially resolved, (2) temporally resolved and spatially integrated, and (3) both temporally and spatially resolved. The results indicate that the dynamic hohlraum heats the silicon aero-gel to approximately 150-eV at peak power. As the dynamic hohlraum source cools after peak power the silicon aero-gel continues to heat and jets axially at an average velocity of approximately 50-cm/μs. The spectroscopy has also shown that the reason for the up/down asymmetry in radiated power on Z is that tungsten enters the line-of-sight on the bottom of the machine much more than on the top. © 2004 Elsevier Ltd. All rights reserved.

More Details

Hot Dense Capsule-Implosion Cores Produced by [Formula presented]-Pinch Dynamic Hohlraum Radiation

Physical Review Letters

Bailey, James E.; Chandler, Gordon A.; Slutz, S.A.; Golovkin, I.; Lake, Patrick W.; Macfarlane, Joseph J.; Mancini, R.C.; Burris-Mog, T.J.; Cooper, G.; Leeper, R.J.; Mehlhorn, T.A.; Moore, T.C.; Nash, Thomas J.; Nielsen, D.S.; Ruiz, Carlos L.; Schroen, D.G.; Varnum, W.A.

Hot dense capsule implosions driven by [Formula presented]-pinch x rays have been measured using a [Formula presented] dynamic hohlraum to implode 1.7–2.1 mm diameter gas-filled CH capsules. The capsules absorbed up to [Formula presented] of x rays. Argon tracer atom spectra were used to measure the [Formula presented] electron temperature and the [Formula presented] electron density. Spectra from multiple directions provide core symmetry estimates. Computer simulations agree well with the peak emission values of [Formula presented], [Formula presented], and symmetry, indicating reasonable understanding of the hohlraum and implosion physics. © 2004 The American Physical Society.

More Details
Results 1–25 of 27
Results 1–25 of 27