Modal analysis for model validation in micro-fabricated devices
Conference Proceedings of the Society for Experimental Mechanics Series
Experimental modal analysis (EMA) was carried out on a micro-machined acceleration switch to characterize the motions of the device as fabricated and to compare this with analytical results for the nominal design. Finite element analysis (FEA) of the nominal design was used for this comparison. The acceleration switch was a single-crystal silicon disc supported by four fork-shaped springs. We shook the base of the die with step sine type excitation. A Laser Doppler Velocimeter (LDV) in conjunction with a microscope was used to measure the velocities of the die at several points. The desired first three modes of the structure were identified. The fundamental natural frequency that we measured in this experiment gives an estimate of the actuation g-level for the specified stroke. The fundamental resonance and actuation g-level results from the EMA and the FEA showed large variations. The discrepancy prompted thorough dimensional measurement of the acceleration switch, which revealed discrepancies between the nominal design and tested component.