Publications

Bryan, Charles R.; Jarek, Russell L.; Flores, Christopher; Leonard, Elliott J.

Abstract not provided.

Bryan, Charles R.; Jarek, Russell L.; Flores, Christopher; Leonard, Elliott J.

Abstract not provided.

Bryan, Charles R.; Jarek, Russell L.; Flores, Christopher; Leonard, Elliott J.

Abstract not provided.

Bryan, Charles R.; Jarek, Russell L.; Flores, Christopher; Leonard, Elliott J.

Abstract not provided.

International High-Level Radioactive Waste Management 2019, IHLRWM 2019

Bryan, Charles R.; Jarek, Russell L.; Flores, Christopher; Leonard, Elliott J.

The DOE and industry collaborators have initiated the high burn-up demonstration project to evaluate the effects of drying and long-term dry storage on high burn-up fuel. Fuel was transferred to a dry storage cask, which was then dried using standard industry vacuum-drying techniques and placed on a storage pad to be opened and the fuel examined in 10 years. Helium fill gas samples were collected 5 hours, 5 days, and 12 days after closure. The samples were analyzed for fission gases (85Kr) as an indicator of damaged or leaking rods, and then analyzed to determine water content and concentrations of other trace gases. Gamma-ray spectroscopy found no detectible 85Kr. Sample water contents proved difficult to measure, requiring heating to desorb water from the inner surface of the sampling bottles. Final results indicated that water in the cask gas phase built up over 12 days to 17,400 ppmv ±10%, equivalent to ∼100 ml of water within the cask gas phase. Trace gases were measured by direct gas mass spectrometry. Carbon dioxide built up over two weeks to 930 ppmv, likely due to breakdown of hydrocarbon contaminants (possibly vacuum pump oil) in the cask. Hydrogen built up to nearly 500 ppmv. and may be attributable to water radiolysis and/or to metal corrosion in the cask.