Publications
Tribological challenges in MEMS and their mitigation via vapor phase lubrication
MicroElectroMechanical Systems (MEMS) have become commercially successful in a number of niche applications. However, commercial success has only been possible where design, operating conditions, and materials result in devices that are not very sensitive to tribological effects. The use of MEMS in defense and national security applications will typically involve more challenging environments, with higher reliability and more complex functionality than required of commercial applications. This in turn will necessitate solutions to the challenges that have plagued MEMS since their inception - namely, adhesion, friction and wear. Adhesion during fabrication and immediately post-release has largely been resolved using hydrophobic coatings, but these coatings are not mechanically durable and do not inhibit surface degradation during extended operation. Tribological challenges in MEMS and approaches to mitigate the effects of adhesion, friction and wear are discussed. A new concept for lubrication of silicon MEMS using gas phase species is introduced. This "vapor phase lubrication" process has resulted in remarkable operating life of devices that rely on mechanical contact. VPL is also an effective lubrication approach for materials other than silicon, where traditional lubrication approaches are not feasible. The current status and remaining challenges for maturation of VPL are highlighted. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).