Publications
SATPro: the system assessment test program for Z-R
In the mid-90's, breakthroughs were achieved at Sandia with z-pinches for high energy density physics on the Saturn machine. These initial tests led to the modification of the PBFA II machine to provide high currents rather than the high voltage it was initially designed for. The success of z-pinch for high energy density physics experiments insured a new mission for the converted accelerator, known as Z since 1997. Z now provides a unique capability to a number of basic science communities and has expanded its mission to include radiation effects research, inertial confinement fusion and material properties research. To achieve continued success, the physics community has requested higher peak current, better precision and pulse shaping versatility be incorporated into the refurbishment of the Z machine, known as ZR. In addition to the performance specification for ZR of a peak current of 26 MA with an implosion time of 100 ns, the machine also has a reliability specification to achieve 400 shots per year. While changes to the basic architecture of the Z machine are minor, the vast majority of its components have been redesigned. Moreover the increase in peak current from its present 18 MA to ZR's peak current of 26 MA at nominal operating parameters requires significantly higher voltages. These higher voltages, along with the reliability requirement, mandate a system assessment be performed to insure the requirements have been met. This paper will describe the System Assessment Test Program (SATPro) for the ZR project and report on the results.