Publications

Role of Environment on the Shear-Induced Structural Evolution of MoS ₂ and Impact on Oxidation and Tribological Properties for Space Applications

Babuska, Tomas F.; Curry, John C.; Dugger, Michael T.; Lu, Ping L.; Xin, Yan X.; Klueter, Sam K.; Kozen, Alexander C.; Grejtak, Tomas G.; Krick, Brandon K.

This work investigates the role of water and oxygen on the shear-induced structural modifications of molybdenum disulfide (MoS₂) coatings for space applications and the impact on friction due to oxidation from aging. We observed from transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) that sliding in both an inert environment (i.e., dry N₂) or humid lab air forms basally oriented (002) running films of varying thickness and structure. Tribological testing of the basally oriented surfaces created in dry N₂ and air showed lower initial friction than a coating with an amorphous or nanocrystalline microstructure. Aging of coatings with basally oriented surfaces was performed by heating samples at 250 °C for 24 h. Post aging tribological testing of the as-deposited coating showed increased initial friction and a longer transition from higher friction to lower friction (i.e., run-in) due to oxidation of the surface. Tribological testing of raster patches formed in dry N₂ and air both showed an improved resistance to oxidation and reduced initial friction after aging. The results from this study have implications for the use of MoS₂-coated mechanisms in aerospace and space applications and highlight the importance of preflight testing. Preflight cycling of components in inert or air environments provides an oriented surface microstructure with fewer interaction sites for oxidation and a lower shear strength, reducing the initial friction coefficient and oxidation due to aging or exposure to reactive species (i.e., atomic oxygen).