Publications

Radiation-transport method to simulate noncontinuum gas flows for MEMS devices

Torczynski, J.R.; Torczynski, J.R.; Gallis, Michail A.

A Micro Electro Mechanical System (MEMS) typically consists of micron-scale parts that move through a gas at atmospheric or reduced pressure. In this situation, the gas-molecule mean free path is comparable to the geometric features of the microsystem, so the gas flow is noncontinuum. When mean-free-path effects cannot be neglected, the Boltzmann equation must be used to describe the gas flow. Solution of the Boltzmann equation is difficult even for the simplest case because of its sevenfold dimensionality (one temporal dimension, three spatial dimensions, and three velocity dimensions) and because of the integral nature of the collision term. The Direct Simulation Monte Carlo (DSMC) method is the method of choice to simulate high-speed noncontinuum flows. However, since DSMC uses computational molecules to represent the gas, the inherent statistical noise must be minimized by sampling large numbers of molecules. Since typical microsystem velocities are low (< 1 m/s) compared to molecular velocities ({approx}400 m/s), the number of molecular samples required to achieve 1% precision can exceed 1010 per cell. The Discrete Velocity Gas (DVG) method, an approach motivated by radiation transport, provides another way to simulate noncontinuum gas flows. Unlike DSMC, the DVG method restricts molecular velocities to have only certain discrete values. The transport of the number density of a velocity state is governed by a discrete Boltzmann equation that has one temporal dimension and three spatial dimensions and a polynomial collision term. Specification and implementation of DVG models are discussed, and DVG models are applied to Couette flow and to Fourier flow. While the DVG results for these benchmark problems are qualitatively correct, the errors in the shear stress and the heat flux can be order-unity even for DVG models with 88 velocity states. It is concluded that the DVG method, as described herein, is not sufficiently accurate to simulate the low-speed gas flows that occur in microsystems.