Publications
Nickel-based gadolinium alloy for neutron adsorption application in RAM packages
The National Spent Nuclear Fuel Program, located at the Idaho National Laboratory (INL), coordinates and integrates national efforts in management and disposal of US Department of Energy (DOE)-owned spent nuclear fuel. These management functions include development of standardised systems for long-term disposal in the proposed Yucca Mountain repository. Nuclear criticality control measures are needed in these systems to avoid restrictive fissile loading limits because of the enrichment and total quantity of fissile material in some types of the DOE spent nuclear fuel. This need is being addressed by development of corrosion-resistant, neutron-absorbing structural alloys for nuclear criticality control. This paper outlines results of a metallurgical development programme that is investigating the alloying of gadolinium into a nickel-chromium-molybdenum alloy matrix. Gadolinium has been chosen as the neutron absorption alloying element due to its high thermal neutron absorption cross section and low solubility in the expected repository environment. The nickel-chromium-molybdenum alloy family was chosen for its known corrosion performance, mechanical properties, and weldability. The workflow of this programme includes chemical composition definition, primary and secondary melting studies, ingot conversion processes, properties testing, and national consensus codes and standards work. The microstructural investigation of these alloys shows that the gadolinium addition is present in the alloy as a gadolinium-rich second phase. The mechanical strength values are similar to those expected for commercial Ni-Cr-Mo alloys. The alloys have been corrosion tested with acceptable results. The initial results of weldability tests have also been acceptable. Neutronic testing in a moderated critical array has generated favourable results. An American Society for Testing and Materials material specification has been issued for the alloy and a Code Case has been submitted to the American Society of Mechanical Engineers for code qualification.