Publications

Modeling and experimental validation of a pylon subassembly mockup with multiple nonlinearities

Ligeikis, Connor; Bouma, Adam; Shim, Justin; Manzato, Simone; Kuether, Robert J.; Roettgen, Daniel R.

The industrial approach to nonlinearities in structural dynamics is still very conservative, particularly from an experimental point of view. A demo aluminum aircraft has been equipped with discrete nonlinear elements designed to replicate real-world engine pylon subassemblies to increase awareness on the effects of nonlinearities in design, and understand how these effects can be positively exploited, if properly understood. After some preliminary experiments aimed at understanding the coupled behavior of the aircraft-pylon mockup, it became clear that more in-depth numerical and experimental analyses are required on the pylon subassembly alone. For this paper, experimental data is collected to analyze the nonlinear dynamic behavior of the pylon, leading to better understanding of the subassembly once it connects to the aircraft. The pylon element has three main sources of nonlinearities: (1) geometric nonlinearities of the connecting beam, (2) contact as the beam presses into the tapered block surface and (3) friction in the bolted connections. Backbone curves are generated, which map the evolution of natural frequency and damping ratio with excitation amplitude. Using the experimental data, a low-order nonlinear model is identified to replicate the backbone characteristics and response of the pylon.