Publications
Modal analysis of CX-100 rotor blade and micon 65/13 wind turbine
At the end of 2008 the United States became the largest producer of wind energy with 25,369 MW of electricity. This accounts for 1.25% of all U.S. electricity generated and enough to power 7 million homes. As wind energy becomes a key player in power generation and in the economy, so does the performance and reliability of wind turbines. To improve both performance and reliability, smart rotor blades are being developed that collocate reference measurements, aerodynamic actuation, and control on the rotor blade. Towards the development of a smart blade, SNL has fabricated a sensored rotor blade with embedded distributed accelerometer measurements to be used with operational loading methods to estimate the rotor blade deflection and dynamic excitation. These estimates would serve as observers for future smart rotor blade control systems. An accurate model of the rotor blade was needed for the development of the operational monitoring methods. An experimental modal analysis of the SNL sensored rotor blade (a modified CX-100 rotor blade) with embedded DC accelerometers was performed when hung with free boundary conditions and when mounted to a Micon 65/13 wind turbine. The modal analysis results and results from a static pull test were used to update an existing distributed parameter CX-100 rotor analytical blade model. This model was updated using percentage error estimates from cost functions of the weighted residuals. The model distributed stiffness parameters were simultaneously updated using the static and dynamic experimental results. The model updating methods decreased all of the chosen error metrics and will be used in future work to update the edge-wise model of the rotor blade and the full turbine model. ©2010 Society for Experimental Mechanics Inc.